Information

  • The Index of Standards contains a set of regulations, standards, directives, standards, requirements, technical specifications (Lastenhefte, technical specifications), instructions and other documents applicable to the Institute's activities.
  • Most entries are tests performed in full or in part by our laboratories.
  • The absence of a specific document in this list does not mean that testing/services relating to a given requirement are not able to be implemented. In this case, please always contact the Institute; the possibility of order fulfillment will be determined individually.
  • The presence of a document in the database is not synonymous with having accreditation. The list of accredited tests is available in the Certificates section and the Scope of Accreditation of the Research Laboratory No. AB 128.
  • We also stipulate that the Index is not a reference list of normative documents. The validity of a given document should always be checked on the website of the issuing institution.
  • In the case of requirements which are the property of another company (such as FCA, VW, BMW, Volvo standards), the customer is obliged to deliver these documents to the Institute before issuing the order.
  • Please also use the BOSMAL search engine to find keywords of interest.
Document No. Title/Description Place of application of the document
PV 3341 Non-Metallic Materials in Automotive Interior Trim. Determination of emission of organic compounds
EPA US CFR Title 40 U.S. Environmental Protection Agency, Code of Federal Regulations, Title 40 Protection of Environment
SAE J1074 Engine Sound Level Measurement Procedure
VDA 277 Non-metallic materials of vehicle interiors - determination of the emission of organic compounds
VDA 278 Non-metallic materials of vehicle interiors - determination of the emission of organic compounds
PN-EN 60068-2-17 Environmental testing - Test methods - Test Q: Sealing
GMW 15634 Determination of Volatile and Semi-Volatile Organic Compounds From Vehicle Interior Materials
VDA 270 Determination of the odour characteristics of trim materials in motor vehicles
PV 3900 Components in passenger compartment. Odor test
FLTM BO 131-03 Interior odor test
MS 300-34 Test method of odor for interior materials
GMW 3205 Determining the resistance to odor propagation of interior materials
GME 60276 Test method for determining the resistance to odour propagation of trim materials
EDS-T-7603 Test method for odor of interior materials
VCS 1027, 2729 Odour of trim materials in vehicles
TPJLR.52.458 Determination and assessment of odour from interior trim materials, components and assemblies
SES N 2405 Odor sensory evaluation
TSM 0505 G Smell quality of non-metallic materials
BSDM 0505 Smell quality of non-metallic materials
SAE J1351 Hot odor test for insulation materials
VCS 1027,2749 Determination of organic emissions from non-metallic materials in vehicle interiors
FLTM BZ 157-01 Determination of organic emissions from non-metallic materials in vehicle interiors by headspace gas chromatography
GMW 8081 Static Headspace GC-MS for Interior Materials Interior Emissions
TPJLR.52.104 Determination of VOC and Carbonyl Emissions for Interior Trim Materials
ISO 16000-6 Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS/FID
ISO 16000-3 Determination of formaldeyhde and other carbonyl compounds - Active sampling method
ISO 12219-4 Method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials — Small chamber method
ISO 12219-7 Odour determination in interior air of road vehicles and test chamber air of trim components by olfactory measurements
GS 97014-2 Emissions measurement in SHED chambers. Determination of volatile, organic emissions from components, semi-finished products and materials that do not carry fuel
GS 97014-3 Emissions measurement with air exchange in a testing chamber. Determination of volatile, organic emissions from components, semi-finished products and materials
GS 97014-4 Emissions measurement with air exchange in a testing chamber. Determination of the olfactory behavior
PV 3942 Determining Organic Emissions from Components for the Passenger Compartment of Motor Vehicles. Emission Test
VDA 276 Determination of organic substances as emitted from automotive interior products using a 1 m³ test cabinet
VCS 1027, 2769 Determination of volatile organic substances from interior components/systems using a 1 m³ emission chamber
D49 3027 Determination of volatile organic emissions - chamber test
D49 3085 Analysis of VOCs, aldehydes and odors
MS 300-57 Test method for vocs emission from part assembly (vocs: volatile organic compounds)
VDA 275 Form part of the vehicle interior - determination of formaldehyde levy - measuring techniques after the modified bottle method
PV 3925 Measuring Emissions of Formaldehyde
VCS 1027, 2739 Determination of formaldehyde emission from components in vehicle interiors
FLTM BZ 156-01 Determination of formaldehyde, aldehyde, and ketone emissions from non metallic components, parts and materials in the vehicle interior
GMW 15635 Determination of Aldehyde and Ketone Emissions From Interior Materials
PSA D40 5535 Analysis of formaldehyde and other carbonyl compounds in the materials of vehicle passenger compartment by liquid chromatography
SES N 2403 Standard for Control of Volatile Organic Compounds Emission
MS 300-55 Test method of volatile organic copmpounds from vehicle interior parts
PN-EN ISO 20884 Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry
ASTM D5185 Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by ICP-OES
DIN 51399-1 Testing of lubricants - Determination of elements content in additives, wear and other contaminations - Part 1: Direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES)
BOSMAL/I-7-43 Material analysis via ICP-OES
PN-EN ISO 3104 Petroleum products -- Transparent and opaque liquids -- Determination of kinematic viscosity and calculation of dynamic viscosity
ASTM D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids
PN ISO 2909 Petroleum products -- Calculation of viscosity index from kinematic viscosity
ASTM D2270 Standard Practice for Calculating Viscosity Index from Kinematic Viscosity at 40°C and 100°C
ASTM D4739 (TBN) Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
ASTM D664 (TAN) Standard test method for ACID number of petroleum products by potentiometric titration
PN ISO 3771 (TBN) Petroleum products - Determination of base number - Perchloric acid potentiometric titration method
PN-C-04049 (TAN i TBN) Petroleum products - Determination of acid and base number via the potentiometric titration method
ASTM D3524 Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography
ASTM D3525 Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography
DIN 51380 Testing of lubricants - Test for fuel diluent in used automotive engine oils - Gas chromatography method
DIN 51454 Testing of lubricants - Determination of low boiling components in used engine oils - Gas chromatography
Regulamin nr 13 EKG ONZ / UNECE Regulation No 13 / Regelung Nr. 13 UN/ECE Regulation No 13 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of vehicles of categories M, N and O with regard to braking
DIN 51452 Testing of lubricants; determination of the soot content in used Diesel engine oils; infrared spectrometry
ASTM E2412 Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D7844 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D7414 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D7624 Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
PN-EN ISO 2719 Determination of flash point - Pensky-Martens closed-cup method
ASTM D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
PN-C-04139 Petroleum products -- Determination of the droplet temperature for plastic lubricants
PN ISO 2137 Petroleum products and lubricants - Determination of cone penetration of lubricating greases and petrolatum
PN-C-04152 Petroleum products - Determination of free base content and free organic acids in solid lubricants
PN ISO 6293-2 Petroleum products - Determination of saponification number - Part 2: Potentiometric titration method
PN-EN ISO 3675 Crude oil and liquid petroleum products - Laboratory determination of density - Hydrometer method
PN-EN ISO 238 Liquid petroleum products - Gasoline - Determination of benzene content by infrared spectrometry
PN-EN 14078 Liquid petroleum products – Determination of the fatty acid metyl ester (FAME) content in medium distillates – infrared spectrometry method
PN-EN ISO 3405 Petroleum products - Determination of distillation characteristics at atmospheric pressure
PN-EN ISO 6246 Petroleum products - Gum content of fuels - Jet evaporation method
PN-C-04064 The object of the standard is the determination of the reaction of aqueous extracts of petroleum products, distillation residues and additives. Determination is carried out in two ways: A - pehametrically and B - visually. (motor fuels)
PN-C-40008-04 Low-friction fluids for cooling systems of internal combustion engines: - pH determination (cooling fluids)
PN-C-40005 p.5.6 Brake fluids for motor vehicles: - Reaction (pH value) Range: 3 - 12
PN-EN ISO 2160 Petroleum products – Corrosive action on copper – Copper strip corrosion test
PN-C-40005 p.5.7 Brake fluids for motor vehicles: - Thermo-oxidative stability
PN-C-40005 p.5.10 Brake fluids for motor vehicles:- Evaporation of brake fluid
PN-C-40008-02 Low-friction fluids for cooling systems of internal combustion engines: - Residue after incineration
PN-EN 14538 Oil and fat processing products - Fatty acid methyl esters (FAME) - Determination of Ca, K, Mg and Na content by inductively coupled plasma optical emission spectrometry (ICP OES)
PN-EN 16136 Automotive fuels. Determination of manganese and iron content in unleaded petrol. Inductively coupled plasma optical emission spectrometry (ICP OES) method.
PN-EN 16476 Liquid petroleum products. Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel. Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES).
PN-EN 15944 Liquid petroleum products. Determination of nickel and vanadium content. Inductively coupled plasma optical emission spectrometry method (ICP OES)
PN-EN ISO 14596 Petroleum products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry
PN-EN ISO 14597 Regulators and limiters of temperature in heat generation systems
PN-EN 15485 Ethanol as a blending component for petrol. Determination of sulfur content. Wavelength dispersive X-ray fluorescence spectrometric method
PN-V-04030 Petroleum products - Determination of the content of elements in liquid fuels and similar products by atomic emission spectrometry with inductively induced plasma
ASTM D7111 Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D5708 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry
ASTM D4951 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D4927 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components - Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D6443 Standard Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)
ASTM D2570 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
Rozporządzenie (WE) nr 715/2007/ Commission Regulation (EC) No. 715/2007 / Verordnung (EG) Nr. 715/2007 Regulation (EC) No 715/2007 of the European Parliament and of the Council of 20 June 2007 on type approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information
Regulamin nr 101 EKG ONZ / UNECE Regulation No. 101 / Regelung Nr. 101 UN/ECE Uniform provisions concerning the approval of passenger cars powered by an internal combustion engine only, or powered by a hybrid electric powertrain with regard to the measurement of the emission of carbon dioxide and fuel consumption and/or the measurement of electric energy consumption and electric range, and of categories M1 and N1 vehicles powered by an electric power train only with regard to the measurement of electric energy consumption and electric range
Rozporządzenie (WE) nr 692/2008/ Commission Regulation (EC) No. 692/2008 / Verordnung (EG) Nr. 692/2008 Commission Regulation (EC) No 692/2008 of 18 July 2008 implementing and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information
Regulamin nr 83 EKG ONZ/ UNECE Regulation No. 83 / Regelung Nr. 83 UN/ECE Uniform provisions concerning the approval of vehicles with regard to the emission of pollutants according to engine fuel requirements
GTR ONZ 15 Global Technical Regulations ONZ Nr 15 -- Worldwide harmonized Light vehicles Test Procedure
EPA USA CFR Title 40 part 86 40 CFR Part 86 - CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES
TRIAS (31-J042(2)-02, 31-J042(3)-02 Automobile Type Approval Handbook for Japanese Certification
Rozporządzenie Parlamentu Europejskiego i Rady (UE) nr 168/2013 / Regulation (EU) No. 168/2013 / Verordnung (EU) Nr. 168/2013 Regulation (EU) No. 168/2013 of the European Parliament and of the Council of 15 January 2013 on the approval and market surveillance of two- or three-wheel vehicles and quadricycles (Text with EEA relevance)
Rozporządzenie delegowane Komisji (UE) nr 134/2014 / Commission Delegated Regulation (EU) No. 134/2014 Commission Delegated Regulation (EU) No. 134/2014 of 16 December 2013 supplementing Regulation (EU) No. 168/2013 of the European Parliament and of the Council with regard to environmental and propulsion unit performance requirements and amending Annex V thereof (Text with EEA relevance)
Global Technical Regulation No. 2 Measurement Procedure for Two-wheeled Motorcycles Equipped with a Positive or Compression Ignition Engine with Regard to the Emission of Gaseous Pollutants, CO2 Emissions and Fuel Consumption
PN-ISO 2416:1997 PN-ISO 2416:1997 - Passenger cars – Weight distribution
DYREKTYWA KOMISJI 95/48/WE / Commission Directive 95/48/EC / RICHTLINIE DER KOMMISSION 95/48/EG Commission Directive 95/48/EC of 20 September 1995 adapting to technical progress Council Directive 92/21/EEC relating to the masses and dimensions of motor vehicles of category M1
ISO 10392:2011 ISO standard 10392:2011 - Road vehicles - Determination of centre of gravity
Rozporządzenie Komisji (UE) nr 672/2010/ COMMISSION REGULATION (EU) No. 672/2010 COMMISSION REGULATION (EU) No. 672/2010 of 27 July 2010 concerning type-approval requirements for windscreen defrosting and demisting systems of certain motor vehicles and implementing Regulation (EC) No 661/2009 of the European Parliament and of the Council concerning type-approval requirements for the general safety of motor vehicles, their trailers and systems, components and separate technical units intended therefor
VDA 19.1 VDA Volume 19 Part 1, Inspection of Technical Cleanliness - Particulate Contamination of Functionally Relevant Automotive Components
IEC 60068-2-60 Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test
Rozporządzenie Parlamentu Europejskiego i Rady (WE) nr 595/2009 / Regulation (EC) No 595/2009 / Verordnung (EG) Nr. 595/2009 Regulation (EC) No 595/2009 of the European Parliament and of the Council of 18 June 2009 on type-approval of motor vehicles and engines with respect to emissions from heavy duty vehicles (Euro VI) and on access to vehicle repair and maintenance information and amending Regulation (EC) No 715/2007 and Directive 2007/46/EC and repealing Directives 80/1269/EEC, 2005/55/EC and 2005/78/EC (Text with EEA relevance)
TRIAS (99-006-01) Automobile Type Approval Handbook for Japanese Certification
PN-EN ISO 9614-1:2010 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points
PN-EN ISO 9614-2:2000 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning
PN-EN ISO 9614-3:2010 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurements by scanning
PN-EN ISO 3746:2011 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane
NO-06-A107:2005 Armaments and military equipment - General technical requirements, inspection and test methods - Methods of testing total resistance to environmental factors
NO-06-A103:2005 Armaments and military equipment - General technical requirements, inspection and test methods - Environmental requirements
Rozporządzenie Komisji (UE) nr 133/2014 / Commission Regulation (EU) No 133/2014 / Verordnung der Kommission (EU) Nr. 133/2014 Commission Regulation (EU) No 133/2014 of 31 January 2014 amending, for the purposes of adapting to technical progress as regards emission limits, Directive 2007/46/EC of the European Parliament and of the Council, Regulation (EC) No 595/2009 of the European Parliament and of the Council and Commission Regulation (EU) No 582/2011 Text with EEA relevance
Rozporządzenie Komisji (UE) 2016/646 / Commission Regulation (EU) 2016/646 / Verordnung (EU) 2016/646 Commission Regulation (EU) 2016/646 of 20 April 2016 amending Regulation (EC) No 692/2008 as regards emissions from light passenger and commercial vehicles (Euro 6) (Text with EEA relevance)
Regulamin nr 24 EKG ONZ/ UN ECE Regulation No. 24 / Regelung Nr. 24 UN/ ECE United Nations Economic Commission for Europe (UNECE) Regulation No. 24 – Uniform provisions concerning: The Approval of Compression Ignition (C.I.) Engines with Regard to the Emission of Visible Pollutants
DIN 75201 Fogging Characteristics of Interior Automotive Materials
SAE J1756 Determination of the Fogging Characteristics of Interior Automotive Materials
ASTM G85 Standard Practice for Modified Salt Spray (Fog) Testing
ASTM B117 Standard Practice for Operating Salt Spray (Fog) Apparatus
ASTM B368 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
DIN 50021 Spray tests with different sodium chloride solutions
ISO 9227 Corrosion tests in artificial atmospheres - Salt spray tests
ISO 6988 Metallic and other non organic coatings -- Sulfur dioxide test with general condensation of moisture
ISO 3231 Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide
ISO 6270-1 Paints and varnishes - Determination of resistance to humidity - Part 1: Condensation (single-sided exposure)
PN-EN 60068-2 Environmental tests - Part 2-18: Tests - R tests and guidance: Water
ISO 11997-1 Paints and varnishes -- Determination of resistance to cyclic corrosion conditions -- Part 1: Wet (salt fog)/dry/humidity
ISO 11997-2 Paints and varnishes-- Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light
BOSMAL/I-7-04 Accelerated ageing under the influence of atmospheric factors (W-O)
VDA 230-219 Ageing of automotive components in solar simulation units
PN-EN ISO 4892-2, met. B ISO 4892-2: Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
PN-EN ISO 16474-2, met. B ISO 16474-2: Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
BOSMAL/I-7-90 Material analysis via WD-XRF
PN-EN ISO 4892-2, met. A ISO 4892-2: Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
PN-EN ISO 16474-2, met. A ISO 16474-2: Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
PN-EN ISO 105-B04 ISO 105-B04: Textiles - Tests for colour fastness - Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test
ISO 6272-1 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
ISO 20567-1 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing
ISO 20567-2 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body
ISO 4532 Vitreous and porcelain enamels - Determination of the resistance of enamelled articles to impact - Pistol test
DIN 55996-1 Paints and varnishes - Stone chip resistance test for coatings - Part 1: Multi impact test
PN-C-81556 Varnish products – Testing the resistance of varnish layers to the action of variable termperature
ASTM B604 Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
PN-ISO 3795 Road vehicles, and tractors and machinery for agriculture and forestry - Determination of burning behaviour of interior materials
Regulamin nr 118 EKG ONZ Seria 02 Rev.2/Add.117/Rev.1/Amend.1 / UNECE Regulation No. 118, Series 02 Rev.2/Add.117/Rev.1/Amend.1 Regulation No 118 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform technical prescriptions concerning the burning behaviour of materials used in the interior construction of certain categories of motor vehicles
DIN 75200 Determination of burning behaviour of interior materials in motor vehicles
FMVSS 302 Flammability of interior materials
PN-ISO 2813 Paints and varnishes - Determination of gloss value at 20 degrees, 60 degrees and 85 degrees
BOSMAL/I-7-95 BOSMAL/I-7-95
ASTM D3418 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM E1356 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
PN-EN ISO 11357-1 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles
ISO 11357-2 Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and glass transition step height
ISO 11357-3 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
PN-EN ISO 868 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 48 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)
ISO 7619-1 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)
ASTM D2240 Standard Test Method for Rubber Property - Durometer Hardness
BOSMAL/I-7-41 FT-IR spectrometric analysis of materials
PN-EN ISO 11358 Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles
ISO 9924-1 Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
ISO 9924-2 Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 2: Acrylonitrile-butadiene and halobutyl rubbers
ASTM D6370 Standard Test Method for Rubber - Compositional Analysis by Thermogravimetry (TGA)
ASTM E1131 Standard Test Method for Compositional Analysis by Thermogravimetry
PN-ISO 188 Rubber, vulcanized or thermoplastic -- Accelerated ageing and heat resistance tests
PN-ISO 1817 Rubber, vulcanized or thermoplastic -- Determination of the effect of liquids
PN-ISO 1431-1 Rubber, vulcanized or thermoplastic -- Resistance to ozone cracking -- Part 1: Static and dynamic strain testing
PN-EN ISO 37:2007/AC1:2008 Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
PN-EN ISO 34-1:2010 Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces
ISO 815-1:2008 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures
ISO 815-2:2008 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 2: At low temperatures
PN-C-04289:1987 Rubber - Determination of relative damping under compressive stress conditions
PN-EN ISO 527-2:2012/Ap1:2013-09 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
PN-EN ISO 178:2011/A1:2013-06 Plastics - Determination of flexural properties
PN-EN ISO 1183-1 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method
ISO 2781 Rubber, vulcanized or thermoplastic - Determination of density
ISO 812 Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness
PN-EN ISO 75-1 Plastics - Determination of temperature of deflection under load - Part 1: General test method
PN-EN ISO 75-2 Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite
PN-EN ISO 306 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
BOSMAL/I-7-87 Różnicowa kalorymetria skaningowa (DSC) – oznaczanie temperatury topnienia i temperatury zeszklenia
ISO 23529:2010 Rubber - General procedures for preparing and conditioning test pieces for physical test methods
PN-EN ISO 291:2010 Plastics -- Standard atmospheres for conditioning and testing
PN-EN ISO 6507-1 Metallic materials - Vickers hardness test - Part 1: Test method
PN-EN ISO 6508-1 Metallic materials - Rockwell hardness test - Part 1: Test method
PN-EN ISO 4498 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
PN-ISO 3754 Steel - Determination of effective depth of hardening after flame or induction hardening
PN-EN ISO 2639 Steels. Determination and verification of the depth of carburized and hardened cases
PN-EN ISO 6892-1 Metallic materials - Tensile testing - Part 1: Method of test at room temperature
PN-EN ISO 898-1 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread
PN-EN ISO 898-5 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread
PN-EN ISO 898-6 Mechanical properties of fasteners — Part 6: Nuts with specified proof load values — Fine pitch thread
PN-EN 28839 Mechanical properties of fasteners; nonferrous metal bolts, screws, studs and nuts
PN-EN ISO 6157-2 Fasteners - Surface discontinuities - Part 2: Nuts
PN-EN ISO 898-2 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread
PN-EN ISO 643 Steels - Micrographic determination of the apparent grain size
ASTM E112 Standard Test Methods for Determining Average Grain Size
PN-EN 26157-1 Fasteners. Surface discontinuities. Bolts, screws and studs for general requirements
PN-EN 26157-3 Fasteners. Surface discontinuities. Bolts, screws and studs for special requirements
ASTM E45 Standard Test Methods for Determining the Inclusion Content of Steel
PN-EN ISO 3887 Steels - Determination of the depth of decarburization
FIAT 7.R0052 FIAT 7.R0052
FIAT 7. H 4030 FIAT 7. H 4030
PN-EN ISO 8492 Metallic materials - Tube - Flattening test
PN-EN ISO 8493 Metallic materials - Tube - Drift-expanding test
BOSMAL/I-7-08 Detection of surface material discontinuities using a magnetic powder method
PN-EN ISO 2624 Copper and copper alloys - Estimation of average grain size
PN-H-04510 Determination of the degree of contamination of steel with non-metallic inclusions
ASTM A247-16 Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings
PN-H-04505:1966 Microstructure of steel products - Patterns and determination
PN-H-04661:1975 Gray, ductile and malleable cast iron - Metallographic tests - Determination of microstructure
BOSMAL/I-7-44 Evaluation of the microstructure of metallic products
PN-EN ISO 2320 Fasteners - Prevailing torque steel nuts - Functional properties
PN-EN ISO 2739 Sintered metal bushings - Determination of radial crushing strength
PN-EN ISO148-1 Metallic materials - Charpy pendulum impact test - Part 1: Test method
PN-EN ISO 4507 Sintered metallic materials with the exception of sintered carbides - Samples for tensile testing
PN-EN 23878 Hardmetals. Vickers hardness test
PN-EN ISO 14271 Resistance welding. Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
PN-EN ISO 4516 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests
PN-EN ISO 4545-1 Metallic materials - Knoop hardness test - Part 1: Test method
PN-EN ISO 6506-1 Metallic materials - Brinell hardness test - Part 1: Test method
Regulamin nr 13-H EKG ONZ / UNECE Regulation No 13-H / Regelung Nr. 13-H UN/ECE Regulation No 13-H of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of passenger cars with regard to braking
Regulamin nr 90 EKG ONZ / Regulation No 90 UN/ECE / Regelung Nr. 90 UN/ECE Uniform Provisions Concerning the Approval of: Replacement Brake Lining Assemblies, Drum Brake Linings and Discs and Drums for Power-driven Vehicles and their Trailers
Regulamin nr 68 EKG ONZ / UNECE Regulation No. 68 / Regelung Nr. 68 UN/ECE UNECE Regulation No. 68 - Uniform Provisions Concerning the Approval of: Power-driven Vehicles Including Pure Electric Vehicles with Regard to the Measurement of the Maximum Speed
Regulamin nr 59 EKG ONZ/ Regulation No 59 UN/ECE / Regelung Nr. 59 UN/ECE Regulation No 59 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of replacement silencing systems
Regulamin nr 51 EKG ONZ / Regulation No 51 UNECE / Regelung Nr. 51 UNECE Regulation No 51 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of motor vehicles having at least four wheels with regard to their noise emissions
Regulamin nr 28 EKG ONZ/ Regulation No 28 UN/ECE / Regelung Nr. 28 UN/ECE Regulation No 28 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of audible warning devices and of motor vehicles with regard to their audible signals
PN-ISO 362:2003 Acoustics - Measurement of noise emitted by accelerating road vehicles - Engineering method
PN-ISO 7188:2003 Acoustics - Measurement of noise emitted by passenger cars under conditions representative of urban driving
Fiat 7.R3000 Fiat 7.R3000
Fiat 7.R2100 Fiat 7.R2100
Regulamin nr 84 EKG ONZ / UNECE Regulation No. 84 / Regelung Nr. 84 UN/ECE UNECE Regulation No. 84 - UNIFORM.PROVISIONS CONCERNING THE APPROVAL OF PASSENGER CARS EQUIPPED WITH AN INTERNAL COMBUSTION ENGINE WITH REGARD TO THE MEASUREMENT OF FUEL CONSUMPTION
Regulamin nr 39 EKG ONZ / Regulation No 39 UN/ECE / Regelung Nr. 39 UN/ECE Uniform provisions concerning the approval of vehicles with regard to the speedometer equipment including its installation
ISO 3832:2002 ISO standard 3832:2002 Passenger cars - Luggage compartments - Method of measuring reference volume
PN-EN 60068-2-6:2008 Environmental testing. Tests. Test Fc. Vibration (sinusoidal)
PN-EN 60068-2-27:2009 Environmental testing. Tests. Test Ea and guidance. Shock
PN-EN 60068-2-64:2008 Environmental testing. Tests. Test Fh. Vibration, broadband random and guidance
ISO 2409 Paints and varnishes - Cross-cut test
ISO 4624 Paints and varnishes - Pull-off test for adhesion
ASTM D3359 Standard Test Methods for Rating Adhesion by Tape Test
ISO 3543 Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method
ISO 2178 Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method
ISO 2361 Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method
ISO 2360 Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method
ISO 1463 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
ISO 2808 Paints and varnishes - Determination of film thickness
ASTM B764 Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
ISO 1519 Paints and varnishes - Bend test (cylindrical mandrel)
ISO 15184 Paints and varnishes - Determination of film hardness by pencil test
FIAT 50488 Determination of abrasion resistance of protective coatings by metallic grit - blasting
ISO 7784-1 Paints and varnishes - Determination of resistance to abrasion - Part 1: Method with abrasive-paper covered wheels and rotating test specimen
IPC-TM-650, Test Method 2.3.25 Detection and Measurement of Ionizable Surface Contaminants by Resistivity of Solvent Extract (ROSE)
IPC-TM-650, Test Method 2.3.28 Test Method 2.3.28 Ionic Analysis of Circuit Boards by Ion Chromatography
CIE 173:2012 Tubular Daylight Guidance Systems
VDA 233-102 Cyclic corrosion testing of materials and components in automotive construction
DIN 75220 Ageing of automotive components in solar simulation units
ISO 16000-9 (PN-EN ISO 16000-9, EN ISO 16000-9) Indoor air — Part 9: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test chamber method
ASTM D1238 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ISO 16232 Road vehicles - Cleanliness of components and systems
ISO 10304-1 Water quality — Determination of dissolved anions by liquid chromatography of ions — Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
DIN 8964-2 Circuit elements for refrigerating systems - Part 2: Sealed systems; Requirements
DIN 74104 Road vehicles - R744-Air-conditioning systems - Condenser/gas cooler
QV 64037 QV 64037 KONDENSATOR (ALLGEMEINGUELTIG)
PN-EN ISO 3744 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane
ESJN11-8C607-A1 p.4.14, p.4.15 ESJN11-8C607-A1 p.4.14, p.4.15
ESH1BG-8C607-AB p.4.14, p.4.15 ESH1BG-8C607-AB p.4.14, p.4.15
ES 3S71-8C607 BA p.III.X ES 3S71-8C607 BA p.III.X
ISO 10534-2 Acoustics -- Determination of sound absorption coefficient and impedance in impedance tubes -- Part 2: Transfer-function method
ASTM E1050 Standard Test Method for Impedance and Absorption of Acoustical Materials Using a Tube, Two Microphones and a Digital Frequency Analysis System
ISO 11654 Acoustics -- Sound absorbers for use in buildings -- Rating of sound absorption
ASTM E2611 Standard Test Method for Measurement of Normal Incidence Sound Transmission of Acoustical Materials Based on the Transfer Matrix Method
ISO 15186-1 Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 1: Laboratory measurements
ISO 354 Acoustics - Measurement of sound absorption in a reverberation room
ASTM C423 Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
Fiat 7.R7401 Fiat 7.R7401
Fiat 7.R0146 Fiat 7.R0146
FCA LP.7R065 FCA LP.7R065
Regulamin nr 10 EKG ONZ / Regulation No 10 UN/ECE / Regelung Nr. 10 UNECE Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility
ISO 7637-2:2011 Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only
EN 61000-4-2 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
ISO 10605 Road vehicles - Test methods for electrical disturbances from electrostatic discharge
IEC 60068-2-6 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
IEC 60068-2-64 Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
IEC 60068-2-27 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
PN-EN ISO 105-B02 ISO 105-B02: Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
BOSMAL/I-4-16 Periodic calibration of applied force meters in the range up to 100 kN
BOSMAL/I-4-51 Calibration of torque measurement devices in the range from 0.1 Nm to 5 Nm
BOSMAL/I-4-57 Torquemeter calibration in the range (0.5 to 500) Nm
BOSMAL/I-4-73 Torquemeter calibration in the range 6000 Nm
PSA B21 7110 Environment specifications for electrical and electronic equipments. Electrical characteristics - The purpose of this standard defines the requirements to observe in order to ensure the electrical behavior and the Electromagnetic Compatibility (EMC) of the vehicles (specific vehicles and utility vehicles) and of associated electric, electronic and pyrotechnic equipment
TL 82466 Electromagnetic Compatibility of Automotive Electronic Components’ Immunity to Electrostatic Discharge (ESD)
General Specification for Electrical/Electronic Components and Subsystems, Electromagnetic Compatibility General Specification for Electrical/Electronic Components and Subsystems, Electromagnetic Compatibility
DIN 50021 CASS Spray tests with different sodium chloride solutions (CASS: copper chloride / acetic acid salt spray fog test)
DIN 50021 SS Spray tests with different sodium chloride solutions (SS: Salt spray fog test)
DIN 50017 KK Condensation-water atmosphere with constant humidity
DIN 50017 KTW Condensation-water climate with alternating air temperature
DIN 50017 KFW Condensation-water climate with alternating humidity and air temperature
VDA 621-415 Technical paint tests - Examination of the corrosion protection of automotive coatings in cyclic alternating stress
ASTM G85 A3 Acidified Synthetic Sea Water Testing (SWAAT Test)
GME 60206 Determination of resistance to corrosion of automotive components by salt spray fog testing
VW PV 1210 Climate Corrosion Test Cycle
FIAT 50180 Corrosion tests - method A1: Salt spray test
JIS D 0203 Method of moisture, rain and spray test for automobile parts
DIN 40050-9 Road vehicles; degrees of protection (IP-code); protection against foreign objects; water and contact; electrical equipment
PN-EN 60529 Degrees of protection provided by enclosures (IP Code)
CEVT 0005952/1 p.3.4.4 Fatigue bending test pipe ends acc. To CEVT specification
Volvo 09186804 p.3.4.4 Fatigue bending test pipe ends acc. to Volvo specification
QS 17003 (17.05.2000), p. 2.2.2.2 Leak test acc. to BMW specification
Fiat 9.02217 p. 2.9. Fan shroud breaking load
Ford ES 3S71-8C607-BB (14/03/2005), p. III. T. Shroud support test of Fan System
PN-EN ISO 9556 Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace
PN-EN 24935 Chemical analysis of iron-based materials - Determination of phosphorus content in unalloyed steels and iron - Spectrophotometric method with molybdenum blue
PN-EN ISO 10720 Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas
PN-EN 16294 Petroleum products and fat and oil derivatives. Determination of phosphorus content in fatty acid methyl esters (FAME). Optical emission spectral analysis with inductively coupled plasma (ICP OES).
PN-EN 14107 Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of phosphorous content by inductively coupled plasma (ICP) emission spectrometry
PN-EN 16576 Automotive fuels. Determination of manganese and iron content in diesel. Inductively coupled plasma optical emission spectrometry (ICP OES) method.
PN-EN ISO 3613 Metallic and other inorganic coatings - Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods
ISO 16750-2 Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 2: Electrical loads
ASTM D1149 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
ISO 20653 Road vehicles - Degrees of protection (IP code) - Protection of electrical equipment against foreign objects, water and access
PN-EN ISO 4892-3 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
PN-EN ISO 16474-3 ISO 16474-3: Paints and varnishes -- Methods of exposure to laboratory light sources -- Part 3: Fluorescent UV lamps
SAE J 2020 Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus
ASTM G154 Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
ISO 105-A02 Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour
PN-EN ISO 179-1:2010 Determination of Charpy impact properties - Part 1: Non-instrumented impact test
PN-EN ISO 180 Plastics - Determination of Izod impact strength
BOSMAL/I-7-49/05 Determination of the content of volatile substances (including water) in plastics by the dryer-weight method
PN-EN ISO 62:2008 p. 6.3, 6.4, 6.6 Plastics - Determination of water absorption
PN-EN ISO 2039-1 Plastics - Determination of hardness - Part 1: Ball indentation method
PN-EN ISO 2039-2 Plastics - Determination of hardness - Part 2: Rockwell hardness
PN-EN 60068-2 Environmental testing -- Part 2-14: Tests -- Test N: Changes in temperature
QS 17003 (17.05.2000), p. 2.2.2.4 Alternating bending test acc. to BMW specification
Rozporządzenie (UE) Nr 2018/858 / Regulation (EU) No 2018/858 REGULATION (EU) 2018/858 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 30 May 2018 on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles, amending Regulations (EC) No 715/2007 and (EC) No 595/2009 and repealing Directive 2007/46/EC
Dyrektywa 2003/37/WE/ Directive 2003/37/EC Directive 2003/37/EC of the European Parliament and of the Council of 26 May 2003 on type-approval of agricultural or forestry tractors, their trailers and interchangeable towed machinery, together with their systems, components and separate technical units and repealing Directive 74/150/EEC
Rozporządzenie (UE) Nr 167/2013 / Regulation (EU) No 167/2013 REGULATION (EU) No 167/2013 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 5 February 2013 on the approval and market surveillance of agricultural and forestry vehicles (repealing Directive 2003/37/EC)
VW 50180 Components, Semi-Finished Products, and Materials in the Vehicle Interior – Emission Behaviour
DIN 8964-1 Circuit components for refrigerating systems - Part 1: Testing
PN-EN ISO 1133 Plastics — Determination of the melt mass-flow rate (MFR) and melt volumeflow rate (MVR) of thermoplastics
ASTM D3364 Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
PN-EN ISO 20566 Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash
PV 3974 Plastic interior components- Determination of the writing strength of injection-molded grained surfaces in vehicle interiors
GMW15487 Determining the Resistance to Abrasion of Organic Coating
PV 3015 Non-Metallic Materials for Interior Trim - Determining Condensable Constituents
Rozporządzenia (UE) nr 2018/1832/ Regulation (EU) 2018/1832/ Verordnung (EU) Nr. 2018/1832 COMMISSION REGULATION (EU) 2018/1832 of 5 November 2018 amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) 2017/1151 for the purpose of improving the emission type approval tests and procedures for light passenger and commercial vehicles, including those for in-service conformity and real-driving emissions and introducing devices for monitoring the consumption of fuel and electric energy
Rozporządzenie Komisji (UE) 2017/1151/ COMMISSION REGULATION (EU) 2017/1151/ VERORDNUNG (EU) 2017/1151 DER KOMMISSION COMMISSION REGULATION (EU) 2017/1151 of 1 June 2017 supplementing Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) No 1230/2012 and repealing Commission Regulation (EC) No 692/2008
PN-EN 60512-11-14 Connectors for electronic equipment - tests and measurements - part 11-14: climatic tests - test 11p: flowing single gas corrosion test
ASTM B845-97 Mixed Flowing Gas (MFG) Tests for Electrical Contacts
Renault 36-00-802 Corporate standard
VW 80000 Electric and Electronic Components in Motor Vehicles up to 3.5 t. General Requirements, Test Conditions, and Tests
PV 3927 Thermogravimetric Analysis for Plastics and Elastomers. Determination: Plasticizers, Carbon Black
PN-EN 13032-1+A1:2012 PN-EN 13032-1+A1:2012
PN-EN 13032-4:2015-09
IES LM 79-08:2008 Electrical and Photometric Measurements of Solid-State Lighting Products
CIE 13.3:1995 Method of Measuring and Specifying Colour Rendering Properties of Light Sources
CIE 15 Colorimetry, 3rd Edition
CIE 015 Colorimetry, 4th Edition
CIE 54.2:2001 Retroreflection - Definition and measurement
CIE 63:1984 The spectroradiometric measurement of light sources
CIE 70:1987 The measurement of absolute luminous intensity distributions
CIE 84:1989 The measurement of luminous flux
PN-E-04040-03:1983
PN-E-04040-04:1983
SAE J1757-1:2015-05-07 Standard Metrology for Vehicular Displays
PN-EN 12966:2015-03
PN-EN 12368:2015-07 p. 8.3
PN-EN 12464-1:2012
PN-EN 12464-2:2014-05
PN-EN 12899-1 Fixed, vertical road traffic signs - Part 1: Fixed signs
ASTM D1003 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
PN-EN 12899-3 Fixed, vertical road traffic signs - Part 3: Delineator posts and retroreflectors
PN-EN ISO 20471
PN-EN 1150
PN-EN 13356
PN-EN 13201-4:2016-03
PN-EN 1463-1:2009
PN-EN 15152:2007
PN-EN 60809:2015-07
PN-EN 62471:2010
IEC TR 62778 Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires
PN-EN ISO 105-A05
PN-EN ISO 105-J01
PN-EN ISO 105-J03
PN-ISO 7724-1
PN-ISO 7724-2
PN-ISO 7724-3
DIN 53236 Colouring materials - Conditions of measurement and evaluation for the determination of colour differences for paint coatings, similar coatings and plastics
SAE J 1545 Instrumental Color Difference Measurement for Exterior Finishes, Textiles and Colored Trim
PN-EN ISO 11664-1
PN-EN ISO 11664-2
PN-EN ISO 11664-3
PN-EN ISO 11664-4
PN-EN ISO 11664-5
PN-EN ISO 11664-6
PN-EN 60068-2-1:2009
PN-EN 60068-2-2:2009
PN-EN 60068-2-78:2013-11
PN-EN 60068-2-30:2008
PN-EN 60068-2-14:2009
PN-EN 60068-2-38:2010
PN-EN 60529:2003/A2:2014-07
VW 50195 Colorimetric Evaluation of Automobile Paint Coatings
ISO 12103-1 Road vehicles - Test contaminants for filter evaluation - Part 1: Arizona test dust
VW 80000 (M-03) Electic and Electronic in Motor Vehicles up to 3,5T. General Requirements, Test Conditions and Tests. M-03 - Dust
VW 80000 (K-16) Electic and Electronic in Motor Vehicles up to 3,5T. General Requirements, Test Conditions and Tests. K-16 - Temperature Shock (without housing)
GS 95024-3-1 (K-05) Elektrische und elektronische Komponenten in Kraftfahrzeugen Umweltanforderungen und Prüfungen. K-05 Temperaturschock Methode Nc
ISO 14911 Water quality — Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography — Method for water and waste water
VCS 5031,19 Flammability of interior materials
MS 300-08 Flammability resistance - interior materials
GS 97038 Determination of burning behavior to automotive interior trim materials
GBT 8410 Flammability of Automotive Interior Materials
AA 0054 Resistance of Coatings to Car-wash Machines
PV 3.3.3 Scratch Resistance of Clear Coats
PV 3908 Wear Resistance
DIN 53863-2 Testing of textiles; abrasion test methods for textile fabrics, rotary abrasion test
GME 60345 Test Method for the Determination of the Resistance to Wear of Automotive Trim Materials
PN-EN 60068-2-70 Environmental testing -- Part 2: Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands
GS 97034-3 Shoe sole test
GS 97034-2 Nail test
GS 97034-11 Variable shoes sole test
PN-EN 20105-A02 Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour
PV 3952 Plastic Interior Components. Testing of Scratch Resistance
TPJLR.52.008 Scratch Resistance. Assessment of Scratch Performance - Crosshatch Method
GS 97034-8 Surface test of motor vehicle interior materials. Determination of the scratch inclination
ISO 105-X12 X12 - Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing
PV 3906 Testing of Abrasion Behaviour
D42 1775 Internal and External Plastic Parts - Wear and Scratch Resistance
AA-0134 Crockmeter test head
ISO 15082 Road vehicles — Tests for rigid plastic safety glazing materials
ISO 7784-2 Paints and varnishes — Determination of resistance to abrasion — Part 2: Method with abrasive rubber wheels and rotating test specimen
ISO 5470-1 Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 1: Taber abrader
ISO 10074 Anodizing of aluminium and its alloys — Specification for hard anodic oxidation coatings on aluminium and its alloys
SAE J365 Method of Testing Resistance to Scuffing of Trim Materials
DIN 53754 Testing of plastics; determination of abrasion, abrasive disk method
Regulamin nr 27 EKG ONZ / UNECE Regulation No. 27 / Regelung Nr. 27 UN/ECE Uniform provisions concerning the approval of advance warning triangles
Regulamin nr 69 EKG ONZ / UNECE Regulation No. 69 / Regelung Nr. 69 UN/ECE UNIFORM PROVISIONS CONCERNING THE APPROVAL OF REAR MARKING PLATES FOR SLOW-MOVING VEHICLES (BY CONSTRUCTION) AND THEIR TRAILERS
Regulamin nr 70 EKG ONZ / UNECE Regulation No. 70 / Regelung Nr. 70 UN/ECE UNIFORM PROVISIONS CONCERNING THE APPROVAL OF REAR MARKING PLATES FOR HEAVY AND LONG VEHICLES
PN-EN 50125-3 Railway applications - Environmental conditions imposed on equipment - Part 3: Signaling and telecommunications equipment
Rozporządzenie (UE) Nr 168/2013 / Regulation (EU) No 168/2013 REGULATION (EU) No 168/2013 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 January 2013 on the approval and market surveillance of two- or three-wheel vehicles and quadricycles
Ustawa (Dz. U. z 2023 r. poz. 919) / Law (Journal of Laws of 2023, item 919) Law on the approval of vehicles and their equipment (Journal of Laws of 2023, item 919)
Rozporządzenie (Dz.U. z 2023 r. poz. 1651)/ Regulation (Journal of Laws of 2023, item 1651) Regulation of the Minister for Infrastructure on the type approval of motor vehicles (Journal of Laws of 2023, item 1651)
Rozporządzenie (Dz.U. z 2023 r. poz. 2001) / Regulation (Journal of Laws of 2023, item 2001) Regulation of the Minister for Infrastructure on the approval tests related to the assembly method of the autogas feed system in vehicles (Journal of Laws of 2023, item 2001)
Rozporządzenie (Dz.U. z 2023 r. poz. 1715) / Regulation (Journal of Laws of 2023, item 1715) Regulation of the Minister for Infrastructure on the individual vehicle approval (Journal of Laws of 2023, item 1715)