Scope of Accreditation of the Testing Laboratory No. AB 128

SCOPE OF ACCREDITATION OF THE TESTING LABORATORY No. AB 128
 Issued by:
POLISH CENTRE FOR ACCREDITATION
01-382 Warszawa, Szczotkarska 42
 
Issue No. 18, Date of issue 17th July 2019
  
NOTE: This scope of accreditation is BOSMAL's translation. In the events of discrepancies, only the original PCA document is binding. You can find it at www.pca.gov.pl and here: Scope of Accreditation of the Testing Laboratory No. AB 128, issue No. 18, date of issue 17th July 2019
 

 

 

 

 

AB 128

Name and address of the organization:

 BOSMAL AUTOMOTIVE RESEARCH & DEVELOPMENT INSTITUTE LTD

TESTING LABORATORY

Sarni Stok 93

43-300 Bielsko-Biała

Identification Code
of domain/object (objects)
of tests:

Domain of the tests / test objects:

A/6; A/26

Acoustic and vibration tests of electric components and vehicle equipment

C/4 ;C/8; C/9

 C/10; C/12; C/21; C/23

Chemical testing, chemical analysis of chemicals, environmental samples, fuels and lubricants, glass and ceramics, plastic, rubber products, textiles, leather and fabrics

E/6; E/26

Electric and electronic tests of electrical and electronic components and vehicles

F/6

 

Electromagnetic compatibility (EMC) tests of electrical and electronic equipment

G/6; G/8;

G/21; G/23; G/26

 

Tests concerning environmental engineering of electrical and electronic equipment, construction products and materials, including plastic and rubber products, textiles and leather and vehicles

H/21; H/23

Fire tests of plastic and rubber products, textiles and leather

J/6; J/8; J/21; J/23

 

 

Mechanical properties testing, metallographic analyses of electrical and electronic equipment, construction products and materials, including plastic and rubber products, textiles and leather and vehicles

Page version: A
     
 
This document is an attachment to the Accreditation Certificate No. AB 128 of 17.07.2019.
Accreditation cycle from 17.07.2019 to 17.07.2023
The status of accreditation and validity of the scope of accreditation can be confirmed at PCA website www.pca.gov.pl 

BOSMAL translation of Issue No. 18, Date of issue 17th July 2019 page 1/44

 AB 128

Name and address of the organization:

BOSMAL AUTOMOTIVE RESEARCH & DEVELOPMENT INSTITUTE LTD
TESTING LABORATORY
Sarni Stok 93
43-300 Bielsko-Biała

Identification Code of domain/object (objects) of tests:

Field of testing and item

L/8

Non-destructive testing of metal products and materials

N/6; N/8; N/10; N/12;

N/13; N/19; N/21; N/23; N/26

Physical properties testing of electrical and electronic equipment, construction products and materials, including glass and ceramics, plastic and rubber products, personal protective equipment, fuels and lubricants, textiles and leather and vehicles

Q/8; Q/21; Q/23

Sensory testing of construction products and materials, plastic and rubber products, textiles and fabrics

Conformity assessment within to the Act of 20 June 1997 – Law on Road Traffic
Page version: A
 
 
This document is an attachment to the Accreditation Certificate No. AB 128 of 17.07.2019.
Accreditation cycle from 17.07.2019 to 17.07.2023
The status of accreditation and validity of the scope of accreditation can be confirmed at PCA website www.pca.gov.pl

BOSMAL translation of Issue No. 18, Date of issue 17th July 2019 page 2/44
 
 
Materials Testing Department (BM)
Sarni Stok 93, 43-300 Bielsko-Biała

Tested object / product

Type of activity/tested characteristics/test methods

Reference documents

Rubber and plastic products

Material identification

Infrared spectrometric method (FTIR)

BOSMAL/I-7-41/05

Hardness:

Range (35 - 100) °Sh

PN-EN ISO 868:2005 met. A & D

Rubber products

Hardness:

Range: (30 - 100) IRHD

ISO 48-2:2018 met. M (mikro)

Strength properties:

- tensile strength (up to 5 kN)

PN-ISO 37:2007

PN-ISO 37:2007/AC1:2008

ISO 37:2017

- tear strength (up to 5 kN)

ISO 34-1:2015

- compression set

[temperature range: +250oC – (-40)oC]

ISO 815-1:2014

ISO 815-2:2014

Hysteresis in compression stresses

PN-C-04289:1987

Resistance to ageing:

- in air

 

ISO 188:2011

- in liquids

ISO 1817:2015

- in ozone atmosphere (static method) 25 pphm to 200 pphm

ISO 1431-1:2012 (p.10)

Density

Gravimetric method

ISO 2781:2018

Brittleness temperature

Range: up to -70°C

Impact method

ISO 812:2017

Plastic products

Density

Immersion method

PN-EN ISO 1183-1:2013-06 met.A

Rockwell hardness

(HRR, HRL, HRM, HRE)
Range: (0 - 130) HR

Rockwell method

PN-EN ISO 2039-2:2002

Impact properties

Range: impact energy up to 50 J

Charpy method

PN-EN ISO 179-1:2010

Izod method

PN-EN ISO 180:2004

PN-EN ISO 180:2004/A1:2007

PN-EN ISO 180:2004/A2:2013-07

Hardness

Ball indentation method

PN-EN ISO 2039-1:2004

Tensile strength (up to 30 kN)

PN-EN ISO 527-2:2012

Flexural strength

Range: 100 N to 30 kN

PN-EN ISO 178:2011

PN-EN ISO 178:2011/A1:2013-06

Flexural modulus
(up to 30 kN)

PN-EN ISO 178:2011

PN-EN ISO 178:2011/A1:2013-06

Heat resistance:

- deflection temperature (up to 300oC)

PN-EN ISO 75-1:2013-06

PN-EN ISO 75-2:2013-06

Vicat softening temperature (up to

 300oC)

PN-EN ISO 306:2014-02

Water absorption

PN-EN ISO 62:2008 Ziff. 6.3, 6.4, 6.6

Content of volatile substances (including water)

BOSMAL/l-7-49/05

Melting point and glass transition temperature

Range: 30°C above the extrapolated end of transition

Differential scanning calorimetry method (DSC)

BOSMAL/I-7-87/02

PN-EN ISO 11357-2:2014-06

PN-EN ISO 11357-3:2018-06

 Page version: A
 
 

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Plastic  products

Polymers decomposition temperature
and decomposition rate,

Measurement of  volatile substances, additives and/or fillers quantity in polymer

Thermogravimetry (TGA)

Range: (25 to 1000)°C

PN-EN ISO 11358-1:2014-09

PV 3927:1992

ASTM D6370-99 (2014)

Products made of: metal, plastic, textiles, nonwoven materials, foams, rubber, paint-coated, galvanic-coated and uncoated

 

 

 

 

 

 

 

 

 

 

 

 

 

Resistance to light
(Fade-Ometer)

BOSMAL/I-7-02/05

PN-EN ISO 4892-2:2013-06 met.B

PN-EN ISO 16474-1:2014-02

PN-EN ISO 16474-1:2014-02, met.B

PN-EN ISO 105-B02:2014-11

GMW 14162:2016 met. A, B, D

Resistance to weather conditions
(Weather-Ometer)

PN-EN ISO 4892-2:2013-06, met. A

PN-EN ISO 16474-1:2014-02

PN-EN ISO 16474-1:2014-02, met.A

PN-EN ISO 105-B04:1999

Flammability

Burning rate

Range: (0 to 300) mm/min

Horizontal burning method

 

PN-ISO 3795:1996

UN ECE Regulation No. 118 Series 03

DIN 75200:1980-09

FMVSS 302:1999

Gloss value at  20o, 60o and 85o
Range: (0 to 199) gloss units

PN-EN ISO 2813:2014-11

Resistance to humidity

PN-EN ISO 6270-1:2018-02

PN-EN ISO 6270-2:2018-02

PN-EN 60068-2-78:2013-11

Resistance to climatic conditions

PN-EN 60068-2-14:2009, Test Nb

Fogging
Range: (0 to 199) gloss units
Gloss method

Range: (0.1 to 5.0) mg
Gravimetric method

DIN 75201:2011-11

SAE J1756:2006-08

PV 3015: 2019

Formaldehyde emission

Range: (0.15 to 3) μg/ml
Spectrophotometric method

VDA 275 (07.1994)

PV 3925:2009

VCS 1027,2739 (03.2004)

FLTM BZ 156-01:2011 Part A

Determination of organic compounds emissions (TVOC) from materials
Range: TVOC (0,13 - 3741) μgC/g

Gas chromatography method with headspace analysis, flame ionization detection and mass spectrometry detection

HS-GC-MS/FID method

BOSMAL/I-7-64/04 

VDA 277 (01.1995)

FLTM BZ 157-01:2011

PV 3341:1995

VCS 1027,2749 (03.2004)

Identification of organic compounds

GC-MS method with the use of NIST 14 mass spectral library

BOSMAL/I-7-64/04

Determination of organic compounds emissions (VOC, FOG) from materials

Range:

VOC: (0,1 - 15500) μg/g

FOG: (0,7 - 53815) μg/g

Gas chromatography method with thermodesorption, flame ionization detection and mass spectrometry detection

(TD-GC-MS/FID) method

BOSMAL/I-7-64/04

VDA 278 (10.2011)

GMW 15634:2014

Ash content

Range: (0,010 - 75,00)%

Gravimetric method

PN-EN ISO 3451-1:2019-04 met. A PN-EN ISO 1172:2002 met. A

 
 
 

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Products made of: metal, plastic, textiles, nonwoven materials, foams, rubber, paint-coated, galvanic-coated and uncoated

Resistance to impact (Pistol Test)

Dynamic method with a ball impact

Range: (1 to 90) N

ISO 4532:1991

Determination of stone-chip (grit) resistance of coatings.

Multi-impact and single impact methods

PN-EN ISO 20567-1:2017-03

DIN 55996-1:2001-04

Test for sealing by water immersion method

Method 2

PN-EN 60068-2-17:2001, Test Qc

 

Plastic products, textiles, nonwoven materials, foams, rubber, coated and uncoated

Odour

Range (1 to 6) grades

Sensoric method

VDA 270:2016

PV 3900:2000

FLTM BO 131-03:2017

Plastic products, textiles, nonwoven materials, foams, rubber and leather

Volatile organic compounds emission (VOC)
Chamber method
Determination of total volatile organic compounds (VOC) concentration
Range: (0.1 to 30) ppm
Flame-ionisation detection method (FID)

ISO 12219-4:2013

ISO 12219-6:2017

GS 97014-3:2014

VDA 276-1:2005

PV 3942:2016

Determination of formaldehyde and other carbonyl compounds emitted in environmental chamber

Range:

Formaldehyde (2,0 - 4826) μg/m3

Acetaldehyde (2,0 - 4926) μg/m3

Acetone (1,0 - 4989) μg/m3

Acrolein (2,0 - 4660) μg/m3

Isovaleraldehyde (4,0 - 4995) μg/m3

Crotonaldehyde (3,0 - 4721) μg/m3

Propionaldehyde (3,0 - 5018)μg/m3

m,p-Tolualdehyde (5,0 - 4965) μg/m3

o-Tolualdehyde (5,0 - 4963) μg/m3

Valeraldehyde (4,0 - 4732) μg/m3

Benzaldehyde (2,0 - 4892) μg/m3

2-Butanone (4,0 - 4929) μg/m3

Butyraldehyde (4,0 - 4961) μg/m3

2,5-Dimethylbenzaldehyde (4,0 - 4862) μg/m3

Cyclohexanone (4,0 - 4662) μg/m3

Hexanal (4,0 - 5157) μg/m3

Heptanal (2,0 - 5442) μg/m3

Octanal (3,0 - 6266) μg/m3

Nonanal (4,0 - 6565) μg/m3

Decanal (9,0 - 4756) μg/m3

Metacroleine (4,0 - 4827) μg/m3

High performance liquid chromatography method with diode array detection method (HPLC-DAD)

ISO 16000-3:2011

BOSMAL/I-7-89/01

 
 
 

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Plastic products, textiles, nonwoven materials, foams, rubber and leather

Determination of volatile organic compounds (VOC) emitted in environmental chamber

Range:

- total (0.050 to 10.0) mg/m3

- individual (1.0 to 350) μg/m3

Gas chromatography with thermal desorption

flame-ionization detection and mass spectrometry

(TD-GC-FID-MS)

ISO 16000-6:2011

Identification of organic compounds

Gas chromatography method with thermal desorption and mass spectrometry (TD-GC-MS) with use of NIST14 mass spectra library

ISO 16000-6:2011

Products made of: metal, plastic, paint-coated, galvanic-coated and uncoated

 

Lead and Cadmium content

Range: Pb (0.002 to 0.1) %

             Cd (0.001 to 0.1) %

Inductively coupled plasma optical emission spectrometry (ICP-OES) method

BOSMAL/I-7-43/06

 

Galvanic coatings and paint coatings on metal and plastic (metal products and plastic products)

Chromium (Cr VI) content

Range: (0.01 to 1) μg/cm²

Spectrophotometric method

PN-EN ISO 3613:2011

Corrosion resistance to variable environmental salt-humid conditions

ASTM G85–11, met. A3

PN-EN ISO 11997-1:2017-10, cycle B

VDA 621-415:1982

Resistance to corrosion in salt spray

NSS method

ISO 9227:2017

ASTM B117-18

DIN 50021:1988-06

FIAT 50180 (12.2007)

Resistance to corrosion in salt spray

AASS method

ISO 9227:2017

DIN 50021:1988-06

FIAT 50180 (12.2007)

Resistance to corrosion in salt spray

CASS method

ISO 9227:2017

DIN 50021:1988-06

FIAT 50180 (12.2007)

Corrosion resistance to sulfur dioxide with general condensation of moisture

PN-EN ISO 6988:2000

PN-EN ISO 3231:2000

Adhesion by:

- Cross-cut method

PN-EN ISO 2409:2013-06

- Pull-off method

PN-EN ISO 4624:2004

ISO 4624:2016

- Shot peening, bending, reel in, scratch,

   thermal shocks methods

BOSMAL/I-7-63/03

Coating thickness

Range: (0 to 1000) µm

Magnetic method

PN-EN ISO 2178:2016-06

PN-EN ISO 2361:1998

PN-EN ISO 2808:2008, met. 7C

Coating thickness

Range: (10 to 1000) μm

Eddy-current method

PN-EN ISO 2808:2008, met. 7D

Microscopic method

PN-EN ISO 1463:2006

PN-EN ISO 2808:2008, met. 6A

Resistance to liquids

PN-EN ISO 2812-1:2018-01

Flexibility

Bend test on mandrel method

PN-EN ISO 1519:2012

Hardness

Pencil method

PN-EN ISO 15184:2013-04

 
 
 

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Galvanic coatings and paint coatings on metal and plastic (metal products and plastic products)

Impact (deformation) resistance
Falling weight method

PN-EN ISO 6272-1:2011

Abrasion resistance
Free falling abrasion material method

PN-C-81516:1976 p. 2.2 (method A)

 

Taber method

ISO 15082:2016

PN-EN ISO 7784-2:2016-05

Resistance to variable temperature

PN-EN 60068-2-14:2009 Test Na

Metal products

HBW hardness

Range:

70 to 200 HBW1/10

70 to 200 HBW2.5/62.5

100 to 450 HBW2.5/187.5

100 to 200 HBW5/250

100 to 450 HBW5/750

100 to 450 HBW10/3000

Brinell method

PN-EN ISO 6506-1:2014-12

Rockwell hardness

Range:

50 to 88 HRA

20 to 100 HRB

20 to 70 HRC

Rockwell method

PN-EN ISO 6508-1:2016-10

HV hardness

Range:

100 to 750 HV5

100 to 750 HV10

100 to 750 HV30

Vickers method

PN-EN ISO 6507-1:2018-05

HV microhardness

Range:

250 to 1000HV0.05

100 to 1000 HV0.1

100 to 1000HV0.3

50 to 1000HV0.5

50 to 1000HV1

Vickers method

PN-EN ISO 6507-1:2018-05

Absorbed energy: KV2 and KU2.

Range:
Initial energy of the pendulum hammer: 300 J

Test temperature:

-       23 ±5oC

-       reduced to -40oC

Charpy pendulum impact test

PN-EN ISO 148-1:2017-02

Mechanical properties:
- yield strength, Re
- proof strength, plastic extension, Rp

- tensile strength, Rm
- ultimate elongation, A
- reduction of area at fracture, Z
Range: up to 150 kN

Tensile test at room temperature

PN-EN ISO 6892-1:2016-09, met. A & B

 

Grain size

Reference patterns method

Secant method

Grain counting method

Optical microscopy method

PN-EN ISO 643:2013-06

ASTM E112-13

 
 
 

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Metal products

Microstructure:

Range:

Microstructure of raw materials, cast materials, annealed materials, after heat treatment, after thermochemical treatment, after plastic forming

Optical microscopy method

BOSMAL/I-7-44/05

PN-EN ISO 945-1:2018-04

PN-H-04661:1975

PN-H-04505:1966

ASTM A247-19

Macrostructure:

- surface defects,

- internal defects

Visual assessment method

Optical microscopy method

BOSMAL/I-7-45/05

 

Metal tube (in full section)

(fmax= 50 mm)

Formability

Flattening method

PN-EN ISO 8492:2014-02

Formability

Drift-expanding method

PN EN ISO 8493:2005

Fasteners: bolts, nuts (M5 up to M22), screws, washers

Surface discontinuities

Visual assessment method

PN-EN ISO 6157-2:2006

PN-EN 26157-1:1998

Thread discontinuities

Visual assessment method

Optical microscopy method

PN-EN 26157-3:1998

Mechanical properties

Tensile method

 

PN-EN ISO 898-1:2013-06, w/o p.9.13

PN-EN ISO 898-5:2012 w/o p.9.4

PN-EN 28839:1999

PN-EN ISO 6157-2:2006

PN-EN ISO 898-2:2012

PN-EN ISO 898-2:2012/Ap1:2016-05

PN-EN ISO 2320:2016-02, w/o p.9.3

Products made of ferromagnetic materials

Materials surface discontinuities
Magnetic-particle method (MT)

BOSMAL/I-7-08/08

Sintered metal products

Apparent hardness

PN-EN ISO 4498:2010

Range:

70 to 200 HBW1/10

70 to 200 HBW2.5/62.5

100 to 450 HBW2.5/187.5

100 to 200 HBW5/250

100 to 450 HBW5/750

100 to 450 HBW10/3000

Brinell method

PN-EN ISO 6506-1:2014-12

Range:

50 to 88 HRA

20 to 100 HRB

20 to 70 HRC

Rockwell method

PN-EN ISO 6508-1:2016-10

Range:

100 to 750 HV5

100 to 750 HV10

100 to 750 HV30

Vickers method

PN-EN ISO 6507-1:2018-05

Radial crushing strength
Compression method

PN-EN ISO 2739:2012

Density
Gravimetric method

PN-EN ISO 2738:2001 p. 9.1

Oil content
Gravimetric method

PN-EN ISO 2738:2001 p. 9.2

Open porosity

Gravimetric method

PN-EN ISO 2738:2001 p. 9.3

 
 

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Iron alloys products

Inclusion content in steel
Method A

Optical microscopy

PN-H-04510:1964

ASTM E45-18a

Depth of decarburization
Metallographic method
Hardness profile method

PN-EN ISO 3887:2018-03

Effective depth of hardened layer after surface heat treatment
Hardness profile method

PN-ISO 3754:1999

Effective depth of carburized and hardened layer
Hardness profile method

PN-EN ISO 2639:2005

Carbon and sulfur content
Range:

C (0.01 to 4.5) %

S (0.005 to 0.6) %
High temperature combustion and IR detection method

PN-EN ISO 15350:2010

Nitrogen  content
Range: (0.005 to 0.5) %
Thermal conductivity method

PN-EN ISO 10720:2009

Content of: Mn, Si, P, Cr, Ni, Mo, Co, Al, Cu, Pb, Ti, Nb, V, Sn

Range:
Mn (0.002 to 4.0) %

Si (0.030 to 3.5) %

P (0.010 to 1.0) %

Cr (0.002 to 25.0) %

Ni (0.002 to 12.0) %

Mo (0.010 to 10,0) %

Co (0.005 to 10.0) %

Al (0.0050 to 10.0) %

Cu (0.0050 to 6.0) %

Pb (0.10 to 0.5) %

Ti (0.010 to 1.5) %

Nb (0.010 to 2.0) %

V (0.010 to 2.0) %

Sn (0.010 to 0.40) %

Inductively coupled plasma optical emission spectrometry (ICP-OES) method

BOSMAL/I-7-43/06

 

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Iron alloys products

Content of: Mn, Si, P, Cr, Ni, Cu, W, V, Al, Ti, Mo, Nb, Co, Sn

Range:

Mn (0.020 to 12.0) %

Si (0.10 to 4.0) %

P (0.020 to 1.0) %

Cr (0.020 to 26.0) %

Ni (0.010 to 22.0) %

Cu (0.020 to 4.1) %

W (0.020 to 18.0) %

V (0.020 to 4.0) %

Al (0.010 to 1.5) %

Ti (0.005 to 1.5) %

Mo (0.010 to 5.0) %

Nb (0.010 to 2.5) %

Co (0.20 to 12.5) %

Sn (0.010 to 0.40) %

Wavelength dispersive X-ray fluorescence spectrometry (WD-XRF) method

BOSMAL/I-7-90/02

Copper products

 

Content of: Sn, Pb, Fe, Mn, Si, Al, Ni, P, Zn

Range:

Sn (0.005 to 10) %

Pb (0.005 to 12) %

Fe (0.010 to 6.5) %

Mn (0.010 to 6) %

Si (0.030 to 5) %

Al (0.005 to 6) %

Ni (0.010 to 10) %

P (0.010 to 0.5) %

Zn (0.030 to10) %

Inductively coupled plasma optical emission spectrometry (ICP-OES) method

BOSMAL/I-7-43/06

Phosphorous content

Range:

(0.005 to 1.3) %

Spectrophotometric method

PN-H-04740-11:1981 p.1

PN-H-04745-05:1981 p.1

Average grain size

Comparison method

PN-EN ISO 2624:1997

Aluminum and its alloys products

Content of: Si, Mg, Mn, Cu, Ni, Fe, Sn, Zn, Pb, Cr, Ti
Range:
Si (0.030 to 15) %

Mg (0.010 to 12) %

Mn (0.010 to 2.5) %

Cu (0.005 to 6) %

Ni (0.010 to 2.5) %

Fe (0.20 to 2) %

Sn (0.005 to 0.5) %

Zn (0.010 to 5) %

Pb (0.005 to 2.5) %

Cr (0.005 to 0.6) %

Ti (0.010 to 0.5) %

Inductively coupled plasma optical emission spectrometry (ICP-OES) method

BOSMAL/I-7-43/06

 

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Aluminum and its alloys products

Content of: Fe, Si, Cu, Zn, Mg, Mn, Ni, Pb, Sn, Cr, Ti, Zr

Range:

Fe (0.10 to 1.0) %

Si (0.10 to 1.5) %

Cu (0.010 to 5.0) %

Zn (0.020 to 5.0) %

Mg (0.010 to 2.0) %

Mn (0.010 to 1.5) %

Ni (0.010 to 1.5) %

Pb (0.010 to 0.50) %

Sn (0.010 to 0.20) %

Cr (0.010 to 0.30) %

Ti (0.010 to 0.25) %

Zr (0.010 to 0.20) %

Wavelength dispersive X-ray fluorescence spectrometry (WD-XRF) method

BOSMAL/I-7-90/02

Zinc and its alloys products

Content of: Al, Cu, Fe, Mg, Pb, Sn,

Range:

Al (0.10 to 10.0) %

Cu (0.050 to 4.0) %

Fe (0.010 to 1.0) %

Mg (0.010 to 1.0) %

Pb (0.001 to 0.1) %

Sn (0.001 to 0.1) %

Inductively coupled plasma optical emission spectrometry (ICP-OES) method

BOSMAL/I-7-43/06

Automobile catalytic converter systems

Content of: Rh, Pd, Pt

Range:

Rh (0,001 – 0,10) %

Pd (0,01 – 0,50) %

Pt (0,01 – 0,50) %

Wavelength dispersive X-ray fluorescence spectrometry (WD-XRF) method

BOSMAL/I-7-90/02

Content Rh, Pd, Pt

Range:

Rh (0,001 – 1,0) %

Pd (0,001 – 1,0) %

Pt (0,001 – 1,0) %

Inductively coupled plasma optical emission spectrometry (ICP-OES) method

BOSMAL/I-7-43/06

 
 

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Car parts, parts / units of machines and devices, electric and electronic products, construction products, plastic and rubber products

Determination of cleanliness

Range:

(0,0003 – 10) g

Gravimetric method

 

DIN 8964-1:1996-03

BOSMAL/I-7-48/04

VDA 19.1:2015 (w/o 8.3 i 8.4)

ISO 16232:2018 (w/o 7.4.5, 7.4.6,

7.4.7, 7.5)

ISO 16232-3:2007

ISO 16232-4:2007

ISO 16232-6:2007

ISO 16232-10:2007

Determination of cleanliness

Range:

Length (5 – 2500) μm

Width (5 – 2500) μm

Optical microscopy method

DIN 8964-1:1996-03

BOSMAL/I-7-48/04

VDA 19.1:2015 (w/o 8.3 i 8.4)

ISO 16232:2018 (w/o 7.4.5, 7.4.6,

7.4.7, 7.5)

ISO 16232-3:2007

ISO 16232-4:2007

ISO 16232-7:2007

ISO 16232-10:2007

Operating and industrial oils

Identification

Infrared spectrometric method (FTIR)

BOSMAL/I-7-41/05

Kinematic viscosity at 40ºC
Range: (2 to 200) mm2/s
Capillary method
Dynamic viscosity (calculated)

PN-EN ISO 3104:2004

Kinematic viscosity at 100ºC
Range: (2 to 25) mm2/s
Capillary method
Dynamic viscosity (calculated)

PN-EN ISO 3104:2004

Acid number

Range: (0.1 to 5.0) mg KOH/g
Potentiometric titration

PN-C-04049:1988
ASTM D 664-17

Alkali number

Range: (1.0 to 15.0) mg KOH/g
Potentiometric titration

PN-C-04049:1988
ASTM D 4739-17

Fuel content

Range: (0.5 to 12) % (m/m)
Chromatographic method

BOSMAL/I-7-86/01

ASTM D3524-14

Greases

Dropping point

Range: (130 to 300) ºC
Visual method

PN-ISO 2176:2011

Cone penetration

Range: (< 400)

PN ISO 2137:2011

 
 
 

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents


 

 

 

 

Engine fuels

Benzene content
Range: (0.1 to 20) % (V/V)
Infrared spectrometric method (FTIR)

PN-EN 238:2000

PN-EN 238:2000/A1:2008

Determination of distillation characteristic at atmospheric pressure

Range: (< 400) ºC

Distillation method

PN-EN ISO 3405:2012

Gum content (unwashed and washed)
Range: (0.5 to 30) mg/100 ml

Gravimetric method

PN-EN ISO 6246:2017-05

Corrosiveness to copper
Visual method

PN-EN ISO 2160:2004

Density
Range: (0.700 to 0.950) g/cm3
Oscillating U-tube method

PN-EN ISO 12185:2002

Flash point
Range: < 200ºC
Pensky-Martens closed cup method

PN-EN ISO 2719:2016-08 met. A

Brake fluids

Colour
Visual method

PN-C-40005:2002 p. 5.2

Boiling point
Range: <300ºC
Distillation method

PN-C-40005:2002 p. 5.3

pH value
Range: 3 to 12
Potentiometric method

PN-C-40005:2002 p. 5.6

Thermal stability
Distillation method

PN-C-40005:2002 p. 5.7.3

Vaporization
Gravimetric method

PN-C-40005:2002 p.5.10

Refrigerating liquids

Ash residue
Gravimetric method

PN-C-40008-02:1992

Boiling point
Range: <300ºC
Distillation method

PN-C-40008-03:1992

pH value
Range: 3 to 12
Potentiometric method

PN-C-40008-04:1992

Alkali reserve
Titration method

PN-C-40008-05:1993

 

Car Assemblies Testing Department (BS)

Sarni Stok 93, 43-300 Bielsko-Biała

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Machinery parts, assemblies and components

Forces: rip, pull out, push in, open and close, switch on and off, operating, (10 N to 100 kN)

BOSMAL/I-7-25/06

Resistance to changeable mechanical load

Range:

- force ± 100 kN

- linear displacement (0 to 250 mm)

- force moment (± 6000 Nm)

- angle (0 to 90°)

BOSMAL/I-7-74/01

Machinery parts, assemblies
and components and another construction components

Dependences between load: force, force moment
and deformation such as: displacement, elongation, deflection, angle of rotation

Range:
- force ± 100 kN
- force moment ± 5 650 Nm
- linear displacement (0 to 250) mm
- angle of rotation (0 to 90°)
Method: direct or indirect measurement

BOSMAL/I-7-100/01

Mechanical coupling components of combinations of vehicles

Resistance to dynamic load
Static strength

Testing on the test rig

UN ECE Regulation No. 55 Series 01, Annex 6

Towing devices

Resistance to static load.

Testing on the test rig

Commission Regulation (EU)
No. 1005/2010, Annex 2

Automotive vehicles of categories M and N

External noise emitted by moving and standing vehicle by acoustic pressure level method

Range (25 to 140) dB

Direct method

UN ECE Regulation No. 51 Series 02
Annex 3 p. 3.1; 3.2, Annex 8 p. 3.1
PN-ISO 362:2003
PN-ISO 7188:2003

Shock absorbers

Damping forces by direct method during simulated operation

Range: up 25 kN

BOSMAL/I-7-51/03

Master cylinders of hydraulic braking systems of automotive vehicles and trailers

Hydraulic tightness by quantitative, qualitative, and quantitative-qualitative methods
Range: up to 110 MPa

BOSMAL/I-7-18/05

Simulated operation

BOSMAL/I-7-26/03

Resistance to multiple repeatable pressure cycles by simulated operation method

BOSMAL/I-7-23/06

Automotive vehicles and trailers brake pipes junctions

Hydraulic tightness
by quantitative,
qualitative, and quantitative-qualitative methods
Range: up to 110 MPa

BOSMAL/I-7-18/05

Automotive vehicles and trailers braking cylinders

Hydraulic tightness by quantitative, qualitative, and quantitative-qualitative methods
Range: up to 110 MPa

BOSMAL/I-7-18/05

Resistance to multiple repeatable pressure cycles by simulated operation method

BOSMAL/I-7-23/06

 

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Automotive vehicles and trailers braking calipers

Hydraulic tightness by quantitative, qualitative, and quantitative-qualitative methods
Range: up to 110 MPa

BOSMAL/I-7-18/05

Resistance to multiple repeatable pressure cycles by simulated operation method

BOSMAL/I-7-23/06

Hydraulic braking systems metal pipes of automotive vehicles

Hydraulic tightness by quantitative, qualitative and quantitative-qualitative methods
Range: up to 110 MPa

BOSMAL/I-7-18/05

Pipes with upended ends, tapped holes, nipples and flexible pipes’ ends

Minimal burst pressure by direct method

Range: up to 110 MPa

BOSMAL/I-7-19/04

Other products subjected to hydraulic pressure

 

Hydraulic tightness by qualitative or quantitative method

Range: up to 110 MPa

Direct method

BOSMAL/I-7-18/05

Minimum burst pressure by direct measurement

Range: up to 110 MPa

Direct method

BOSMAL/I-7-19/04

Resistance to multiple repeatable pressure cycles by simulated operation method

Range: (0 to 250) bar

Direct method

BOSMAL/I-7-23/06

Car gearboxes

Gears and bearings durability
by simulated operation method

BOSMAL/I-7-17/03

Parts, assemblies and components of driveline of heavy-duty vehicles

Efficiency

Testing on the test rig

Commission Regulation(EU)
No. 2017/2400 Annex VI p.3

Brake discs, brake drums and brake linings of disc and drum brakes in M1 and N1-category vehicles

Friction properties

Wearing

Durability

Load resistance

Temperature resistance

Dynamic friction

Brake testing method under real conditions on a dynamometer with reduced inertia moment to one wheel

UNECE Regulation No. 90 Series 02 Annex 3, Annex 4, Annex 9, Annex 11

BOSMAL/I-7-91/01

BOSMAL/I-7-93/01

BOSMAL/I-7-94/01

UNECE Regulation No. 13 Series 11 Annex 4, Annex 11, Annex 15,
Annex 19

BOSMAL/I-7-96/01

BOSMAL/I-7-97/01

UNECE Regulation No. 13H
Series 01 Annex 3, Annex 7

BOSMAL/I-7-98/01

BOSMAL/I-7-99/01

 

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Brake discs, brake drums and brake linings of disc and drum brakes in L1, L2, L3, L4 and L5-category vehicles

 

Friction properties

Wearing

Durability

Load resistance

Temperature resistance

Dynamic friction

Brake testing method under real conditions on a dynamometer with inertia moment reduced to one wheel

UNECE Regulation No. 78 Series 04

Brake discs, brake drums and brake linings of disc and drum brakes including brake callipers in M1 and N1-category vehicles, as well as L1,L2, L3, L4 and L5-category vehicles

 

 

Friction properties

Friction coefficient

Performance indicators

ISO 11157:2005

ISO 15484:2008

ISO 26867:2009

JASO C406:2000

SAE J2784:2009-09

SAE J2522:2014-09

JASO C436:1999

JASO C442:1977

JASO C443:2009

Wearing

SAE J2707:2012-10

JASO C456:1984

JASO C427:2009

Wearing caused by temperature

SAE J2707:2012-10

Durability

JASO 0419:2006

Temperature resistance

SAE J2928:2018-05

Noise emitted by brake

SAE J2521:2013-04

Brake callipers in M1 and N1-category vehicles, as well as L1, L2, L3, L4 and L5-category vehicles

Resistance to pressure, temperature and braking moment

JASO C459:2010

Electric drives

Noise level in acoustic chamber (global, third-octave and octave levels)
by direct measurement in general, in one-third octave bands or octave bands

 

BOSMAL/I-7-42/03

 

Engine Research Department (BH)

Sarni Stok 93, 43-300 Bielsko-Biała

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Combustion engines

(max. power up to 500 kW)

 

 

 

 

 

 

Performance measurement on the engine test bench

UN ECE Regulation No. 85 Series 00

Directive 80/1269/EEC, with amendments and corrections up to Directive 1999/99/EC

Smoke measurement
Range: (0 to 60)%

Opacity method

UN ECE Regulation No. 24 Series 03

Directive 72/306/EEC with amendments and corrections up to Directive 2005/21/EC

Operating parameters:

- torque (0 to 3000) Nm;

tensometric method

- engine power (0 to 500) kW;

Calculated

- rotational speed (0 to 10 000) rpm;

impulse method

- fuel consumption (0 to 150) kg/h;

gravimetric method

- air consumption (0 to 2 400) kg/h;

thermoanemometric method

 

Concentration: CO, CO2, N2O, NO2, NOx, THC, CH4, NMHC, NH3

CO:  range: (0 to 10)%;

method: NDIR

CO2: range: (0 to 20)%;

method: NDIR

N2O: range: (0 to 0.001)%;

method: CLD

NO2: range: (0 to 0.01)%;

method: CLD

NOx: range: (0 to 0.01)%;

method: CLD

THC: range: (0 to 0.02)%;

method: FID

CH4: range: (0 to 0.02)%;

method: FID

NMHC: range: (0 to 0.02)%;

method: FID

NH3: range: (0 to 0.001)%;

method: LDD

 

PM - Particulate mass

gravimetric method

 

PN - particulate number

laser method

UN ECE Regulation No. 49 Series 06

 

Regulation (EU) 2016/1628 as amended up to Regulation (EU) 2017/654

US EPA Regulations, Code of Federal Regulation (CFR) Title 40 – Protection of Environment, Part 1039, 1042, 1065, 1068.

UN IMO Standards Tier I, II, III; Annex VI 2008, Edition 2017

Directive 94/25/EC, as amended by Directive 2003/44/EC,

Regulation (EU) 1025/2012 and Directive 2013/53/EU

 

Swiss Federal Ordinance on Air Pollution Control (OAPC) Appendix 4, Section 31, paragraph 1 and 2; Section 32,

paragraph 2 SN 277206:2014-06

 

UN ECE Regulation No. 96 Series 04

UN ECE Regulation No. 120 Series 02

UN ECE Regulation No. 132 Series 01

UN ECE Regulation No. 143 Series 00

Various tests on the engine test bench

BOSMAL/I-7-46/03

Electric drivetrains

(max. power up to 500 kW)

Net power and the maximum power after 30 minutes

on the engine test bench

UN ECE Regulation No. 85 Series 00

 
 
 

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Replacement silencing systems of M1 and N1 motor vehicles

Silencing system back pressure measurement

UN ECE Regulation No. 59 Series 02

Vehicles of categories M and N with Sl and CI engines, including hybrid vehicles

 

Emission of gaseous and particulate matter exhaust pollutants – ambient temperatures from 14°C to 30°C

(Type I Test)

Concentration: CO, CO2, NO2, NOx, THC, CH4, PM, PN:

Range:

- CO: (0 to 12)% ;

- CO2: (0 to 20)%

Method: NDIR

- NO2, NOx: (0 to 1)%

Method: CLD;

- THC: (0 to 5)%

Method: FID;

- CH4: (0 to 0.05)%

Method: chromatographic GC-FID;

- CH4: (0 to 2.5)%

Method: FID;

- O2: (0 to 22)%,

Method: PMD

- PM – gravimetric method;

- PN – laser method.

Emission: CO, CO2, NO2, NOx, THC, CH4, NMHC, PM, PN (calculated)

UN ECE Regulation No. 83 Series 07

 

Regulation (EC) 715/2007 as amended up to Regulation (EU) 459/2012

 

Regulation (EC) 692/2008 as amended up to Regulation (EU) 2018/1832

 

Directive 70/220/EEC, as amended

up to Directive 2003/76/EC

 

UN Global Technical Regulation (GTR) No. 15

 

Regulation (EU) 2017/1151 as amended up to Regulation (EU) 2018/1832

 

 

 

 

Emission of gaseous pollutants in real driving conditions

Measurement of concentration with PEMS mobile analyzers:

CO - method: NDIR;

Range (0 to 10)%

CO2 - method: NDIR;

Range (0 to 20)%

THC - method: FID;

Range (0 to 10000) ppmC3

NO - method: CLD, NDUV;

Range (0 to 5000) ppm

NO2 - method: NDUV;

Range (0 to 2500) ppm

NOx – method CLD;

Range (0 to 3000) ppm

PN - laser method, electrostatic method Emission: CO, CO2, THC, NO, NO2, NOx, PN

Regulation (EC) 692/2008 as amended up to Reg. (EU) 2018/1832

 

Regulation (EU) 2017/1151 as amended up to Reg. (EU) 2018/1832

Carbon monoxide emission at idling

(Type II Test)

 

Emission measurement:

- CO – infrared method;

Range:  (0 to 10)%

- CO2 – infrared method;

Range:  (0 to 20)%

- THC – infrared method;

Range:  (0 to 2)%

- O2 – chemical method;

Range:  (0 to 25)%

 

UN ECE Regulation No. 83 Series 07

 

Regulation (EC) 715/2007 as amended up to Reg. (EU) 459/2012

 

Regulation (EC) 692/2008 as amended

up to Reg. (EU)  2018/1832

 

Directive 70/220/EEC as amended

up to Directive 2003/76/EC

 

Regulation (EU) 2017/1151 as amended up to Reg. (EU) 2018/1832

 
 
 

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Vehicles of categories M and N with Sl and CI engines, including hybrid vehicles

 

Emission of crankcase gases by crankcase underpressure method

(Type III Test)

Range: 1 m H2O

- manometric method

UN ECE Regulation No. 83 Series 07

Regulation (EC) 715/2007 as amended up to Reg. (EU) 459/2012

Regulation (EC) 692/2008 as amended up to Reg. (EU) 2018/1832

Directive 70/220/EEC, as amended up to Directive 2003/76/EC

Regulation (UE) 2017/1151 as amended up to Reg. (EU) 2018/1832

Durability of anti-pollution devices by using driving tests emission measurement method, before and after vehicle ageing
(Type V Test)

Emissions of CO and HC gaseous pollutants at ambient temp. -7°C

(Type VI Test)

Measurement of concentrations:

- CO – NDIR method;

Range:  (0 to 12)%

- THC – FID method;

Range:  (0 to 5)%

Emission calculated

On-board diagnostic (OBD) operation  test

Heavy-duty vehicles of categories M and N with Sl and CI engines, including hybrid vehicles

Emission of gaseous pollutants in real driving conditions

Measurement of concentration with PEMS mobile analyzers:

CO - method: NDIR;

Range (0 to 10)%

CO2 - method: NDIR;

Range (0 to 20)%

THC - method: FID;

Range (0 to 10000) ppmC3

NO - method: CLD, NDUV;

Range (0 to 5000) ppm

NO2 - method: NDUV;

Range (0 to 2500) ppm

NOx – method CLD;

Range (0 to 3000) ppm

Emission: CO, CO2, THC, NO, NO2, NOx

Regulation (EC) 595/2009 as amended up to Regulation (EU) 133/2014

Regulation (EU) 582/2011 as amended up to Regulation (EU) 2017/2400 and Regulation (EU) 2018/932

 

Regulation (EU) 2017/2400 as amended

up to Regulation (EU) 2019/318

Non-road mobile machinery with Sl and CI engines

Regulation (EU) 2016/1628 as amended up to Regulation (EU) 2017/654, Regulation (EU) 2017/655 and Regulation (EU) 2018/987

Regulation (EU) 2018/985

Vehicles of categories M and N with Sl and CI engines, including hybrid and electric vehicles

Fuel consumption by the carbon balance method

UN ECE Regulation No. 101 Series 01

Regulation (EC) 715/2007 as amended up to Reg. (EU) 459/2012

Regulation (EC) 692/2008 as amended up to Reg. (EU) 2018/1832

Directive 80/1268/EEC as amended up to Directive 2004/3/EC

UN Global Technical Regulation (GTR) No. 15

Regulation (EU) 2017/1151 as amended up to Reg. (EU) 2018/1832

 
 
 

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Vehicles of categories M and N with Sl and CI engines, including hybrid and electric vehicles

Electrical energy consumption by energy balance method

Driving range on electrical battery power

Current: range (0 to 500) A

Voltage: range (0 to 1500) V

UN ECE Regulation No. 101 Series 01

 

Regulation (EU) 2017/1151 as amended up to Regulation (EU) 2018/1832

 

Vehicles with SI and CI engines

Emission of gaseous pollutants at idling and at idling-up speed by direct measurement of row exhaust gases

 

Measurement of concentrations:

- CO – infrared method ;

Range:  (0 to 10)%

- CO2 – infrared method

Range:  (0 to 20)%

- THC – infrared method;

Range:  (0 to 2)%

- O2 – chemical method

Range:  (0 to 25)%

 

MI Decree from 31.12.2002
(D.U. No. 32, p. 262 from 2003) § 9.1 p. 2 and 3 Att. 2, as amended

up to MT Decree from 09.01.2013 p.30

 

Directive 2009/40/EC, as amended

up to Directive 2010/48/EU

 

UN ECE Regulation No. 24 Series 03

 

Regulation (EC) 715/2007 as amended, up to Regulation (EU) 459/2012

 

Regulation (EC)  692/2008 as amended up to Regulation (EU) 2018/1832

 

Regulation (EU) 2017/1151 as amended up to Regulation (EU) 2018/1832

 

 

 

 

Smoke

Range: (0 to 60)%

Opacity method

Catalysts for spare parts for M and N-category vehicles with SI and CI engines

Catalyst system efficiency by comparative measurement of emission of gaseous and particulate pollutants  

UN ECE Regulation No. 103 Series 00

Regulation (EC) 715/2007 as amended up to Regulation (EU) 459/2012

 

Regulation (EC) 692/2008 (18.07.2008) as amended up to Regulation (EU) 2018/1832

Regulation (EU) 2017/1151 as amended up to Regulation (EU) 2018/1832

M and N-category vehicles equipped with additional LPG or CNG fueling retrofit

Gaseous exhaust emission

Concentration: CO, CO2, NO2, NOx, THC, CH4.

Range:

- CO: (0 to 12)% ;

- CO2: (0 to 20)%

NDIR method;

- NO2, NOx: (0 to 1)%

CLD method;

- THC: (0 to 5)%

FID method;

- CH4: (0 to 0.05)%

chromatographic method - GC-FID;

- CH4: (0 to 2.5)%

FID method;

- O2: (0 to 22)%,

PMD method

Emission: CO, CO2, NO2, NOx, THC, CH4, NMHC (calculated)

UN ECE Regulation No. 115 Series 00

Fuel consumption by the carbon balance method

Maximum power on wheels

Range: (0 to 258) kW

Tensometric method

On-board diagnostic (OBD) operation  test

 
 
 

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

M and N-category vehicles with SI and CI engines

Emission of gaseous and particulate exhaust pollutants - JC08 tests

Concentration: CO, CO2, NO2, NOx, THC, CH4, PM,PN:

Range:

- CO: (0 to 12)% ;

- CO2: (0 to 20)%

NDIR method;

- NO2, NOx: (0 to 1)%

CLD method;

- THC: (0 to 5) %

FID method;

- CH4: (0 to 0.05)%

chromatographic method GC-FID;

- CH4: (0 to 2.5)%

FID method;

- O2: (0 to 22)%,

PMD method;

- PM – gravimetric method;

- PN – laser method.

Emission: CO, CO2, NO2, NOx, THC, CH4, NMHC, PM, PN (calculated)

TRIAS 31-J042(2)-02

TRIAS 31-J042(3)-02

Attachment 42 -Technical Standard

 

.

 

Emission of CO, HC, and COat idling

Underpressure in the crankcase
by direct measurement

Fuel consumption by JC08 tests

TRIAS 99-006-01

Two-wheel or three-wheel and four-wheel motor vehicles, including hybrid and electric vehicles

Emission of gaseous and particulate exhaust pollutants

(Type I Test)

Concentration: CO, CO2, NO2, NOx, THC, CH4, PM, PN:

Range:

- CO: (0 to 12)%;

- CO2: (0 to 20)%

Method: NDIR

-NO2, NOx: (0 to 1)%

Method: CLD;

- THC: (0 to 5)%

Method: FID;

- CH4: (0 to 0.05)%

Chromatographic method GC-FID;

- CH4: (0 to 2.5)%

Method: FID;

- O2: (0 to 22)%,

Method: PMD

- PM - gravimetric method;

- PN - laser method.

Emission: CO, CO2, NO2, NOx, THC, CH4, NMHC, PM (calculated)

Regulation (EU) 168/2013

Regulation (EU) 134/2014 as amended up to Regulation (EU) 2018/295

UN Global Technical Regulations (GTR) No. 2

 

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Two-wheel or three-wheel and four-wheel motor vehicles, including hybrid and electric vehicles

Test of carbon monoxide at idling

(Type II Test)

Emission measurements:

- CO - infrared method;

Range: (0 to 10)%

- CO2 - infrared method;

Range: (0 to 20)%

- THC - infrared method;

Range: (0 to 2)%

- O2 - chemical method;

Range: (0 to 25)%

Regulation (EU) No. 168/2013

Regulation (EU) No. 134/2014 as amended up to Regulation (EU) 2018/295

UN Global Technical Regulations (GTR) No. 2

Emission of crankcase gases
by crankcase underpressure measurement
(Type III Test)

Range: 1 m H2O

- manometer method

Emission of CO2, fuel consumption, consumption of electrical power and driving range when battery-powered by carbon balance and energy balance methods

Type VII Test

Maximum power on wheels

Tensometric method

Range: (0 to 258) kW

 

 

Heat Exchangers Testing Department (BW)

Sarni Stok 93, 43-300 Bielsko-Biała

Tested objects /
 groups of objects

Type of activity/tested

characteristics/test methods

Reference documents

Car heat exchangers and other elements of heat exchange systems

Resistance to working medium temperature changes

BOSMAL/I-7-53/02

Resistance to working medium changeable pressure

BOSMAL/l-7-54/02

 

Automotive Electrotechnics & Electronics Testing Laboratory(BE)

Sarni Stok 93, 43-300 Bielsko-Biała

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Components/assemblies of electric and electronic equipment

Voltage (100 x 10-6 V to 1000 V)

BOSMAL/I-7-10/05

Electric current (200 x 10-6 A to 300 A)

BOSMAL/I-7-37/05

Resistance (50 x 10-6 Wto 100 x 1012  W)

ISO 6722-1:2011

ISO 6722-1:2011/Cor1:2012

PN-EN 60851-5:2008

Capacitance (1 pF to100 μF)

BOSMAL/I-7-39/04

Inductance (100 μH to100 H)

BOSMAL/I-7-39/04

Components/assemblies of machinery and other devices

Environmental hazard resistance:

Test A: Cold (up to -40±2°C)

PN-EN 60068-2-1:2009

Test B: Dry heat (up to 300±2°C)

PN-EN 60068-2-2:2009

Test Cab: Damp heat, steady state

(30±2°C; 93±3%)

(30±2°C; 85±3%)

(40±2°C; 93±3%)

(40±2°C; 85±3%)

PN-EN 60068-2-78:2013-11

 

Test Db: Damp heat, cyclic

(12h+12h cycle)

PN-EN 60068-2-30:2008

Test Na: Change of temperature
(-40±2°C to 150±2°C)

PN-EN 60068-2-14:2009

Test Nb: Change of temperature

(-40±2°C to 130±2°C) with gradient ≤ 10°C/min

PN-EN 60068-2-14:2009

Test Z/AD: Composite temperature/humidity cyclic test

PN-EN 60068-2-38:2010

Test Fc: Vibration (sinusoidal)

Range: up to 100 g (peak)

PN-EN 60068-2-6:2008

Test Ea: Shock

Range: up to 150 g (peak)

PN-EN 60068-2-27:2009

Test Fh: Vibrations, broadband random

Range: up to 70 g (RMS)

PN-EN 60068-2-64:2008

Water resistance (tests concerning second characteristic digit 1, 2, 3, 4, 4K, 5, 6, 6K, 7, 8, 9, 9K)

Test Rb 1.1 by oscillatory pipe method
(max. 40 l/min)

Test Rb 2, Rb 3 and Rc 1

PN-EN 60529:2003 p. 14.2.1, 14.2.2, 14.2.3; 14.2.4, 14.2.5, 14.2.6, 14.2.7, 14.2.8

PN-EN 60529:2003/A2:2014-07

PN-EN 60068-2-18:2017-08

ISO 20653:2013

Dust penetration resistance

(dust tests concerning first

characteristic digit 5, 5K, 6, 6K)

in dust chamber with negative pressure  and dust circulation being forced

PN-EN 60529:2003 p. 13.4

PN-EN 60529:2003/A2:2014-07

ISO 20653:2013

Degrees of protection against foreign objects (tests concerning first

characteristic digit 1, 2, 3, 4 and additional letters A, B, C, D)

PN-EN 60529:2003

PN-EN 60529:2003/A2:2014-07

ISO 20653:2013

Degrees of protection against access to hazardous parts (tests concerning first

characteristic digit 1, 2, 3, 4 and additional letters A, B, C, D)

PN-EN 60529:2003

PN-EN 60529:2003/A2:2014-07

ISO 20653:2013

Splash water test

ISO 16750-4:2010

 
 
 

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Luminous devices powered by constant or alternating voltage

Luminous intensity distribution by goniophotometric method with rotating object (0.1 to 5 x 106) cd

BOSMAL/I-7-84/02

PN-EN 13032-1+A1:2012

PN-EN 13032-4:2015-09

CIE 70:1987

IES LM 79-08:2008

PN-EN 12966:2015-03

PN-EN 12966+A1:2019-02

Spectral and colorimetric characteristics (spectral distribution, chromaticity coordinates, correlated colour temperature)

CIE 13.3:1995

CIE 15:2004

CIE 15:2018

CIE 63:1984

IES LM 79-08:2008

PN-EN 13032-4:2015-09

PN-EN 12966:2015-03

PN-EN 12966+A1:2019-02

Luminance (1 x 10-8to 3 x 105) cd/m2

PN-E-04040-04:1983

PN-EN 13032-1+A1:2012

PN-EN 13032-4:2015-09

SAE J1757-1:2015-05

PN-EN 12966:2015-03

PN-EN 12966+A1:2019-02

PN-EN 12966-1:2009

PN-EN ISO 9241-305:2009

Luminous flux

CIE 84:1989

PN-EN 13032-1+A1:2012

PN-EN 13032-4:2015-09

IES LM 79-08:2008

Traffic control equipment

Signal heads

Luminance uniformity

PN-EN 12368:2015-07 p. 8.3

Workplaces, passageways

Illuminance

(1 x 10-3 to 3 x 105) lx

PN-E-04040-03:1983

PN-EN 12464-1:2012

PN-EN 12464-2:2014-05

Components/assemblies of electric/electronic cars equipment

 

Voltage

PN-S-76020:1997 p. 3.3.2

Voltage drop

PN-S-76020:1997 p. 3.3.3

Resistance to high voltage

PN-S-76020:1997 p. 3.3.4

Resistance to short-circuit

PN-S-76020:1997 p .3.3.5

Resistance to change in the polarity of the power source

PN-S-76020:1997 p. 3.3.6

Durability

PN-S-76020:1997 p. 3.3.12

Insulation resistance

ISO 16750-2:2012 p. 4.12

Dielectric strength

ISO 16750-2:2012 p. 4.11

Resistance to dump heat, steady state

PN-EN 60068-2-78:2013-11

PN-S-76020:1997 p. 3.3.9

Thermal resistance

PN-EN-60068-2-2:2009

PN-EN-60068-2-1:2009

Resistance to cyclical temperature changes

PN-S-76020:1997 p. 3.3.8

Vibration resistance

PN-EN-60068-2-6:2008

PN-S-76020:1997 p. 3.3.10

Dust and water resistance

PN-S-76020:1997 p. 3.3.13

PN-EN-60529:2003 p. 13.4; 14.2.3; 14.2.4

PN-EN 60529:2003/A2:2014-07

 
 
 

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Cars switches

Voltage drop

BOSMAL/I-7-67/02

Insulation resistance

Dielectric strength

Durability

Interchangeability of parts

Thermal resistance

PN-EN-60068-2-2:2009

PN-EN-60068-2-1:2009

Resistance to cyclical temperature changes

PN-EN-60068-2-14:2009

Humidity resistance

PN-EN 60068-2-78:2013-11

Vibration resistance

PN-EN-60068-2-6:2008

Dust and water resistance

PN-EN-60529:2003 p. 13.4; 14.2.3; 14.2.4

PN-EN 60529:2003/A2:2014-07

Automobile electronic breakers for direction indicator lamps and emergency lights

Start time

PN-ISO 4082-1999 p.5.5

Frequency and duty cycle

PN-ISO 4082-1999 p.5.6

Voltage drop

PN-ISO 4082-1999 p.5.8

Dielectric strength

PN-ISO 4082-1999 p.5.9

Resistance to overload

PN-ISO 4082-1999 p.5.11

Vibration resistance

PN-ISO 4082-1999 p.5.12.2

Impact resistance

PN-ISO 4082-1999 p.5.13

Resistance to heat and cold

PN-ISO 4082-1999 p.5.14

Operation in extreme temperatures

PN-ISO 4082-1999 p.5.15

Durability

PN-ISO 4082-1999 p.5.16

Wire harnesses/cables of low voltage car installation

Insulation resistance

Withstand voltage

Voltage drop

Resistance to cyclical temperature changes

Squeeze test

Quality of manufacturing

Tightness test (bubble test)

Resistance to high temperature

Cold flexibility

Cold flexibility after accelerated ageing

Resistance to static immersion

Resistance to rain

Insulation shrinkage

Cold Impact

Active resistance

BOSMAL/I-7-69/03

ISO 6722-1:2011

ISO 6722-1:2011/Cor 1:2012

PN-EN 60068-2-14:2009

IEC 60227-2:1997+A1:2003 p. 2.1

Electrical connectors

Resistance (voltage drop)

Water resistance

Temperature/humidity cycling

Insulation resistance

Withstand voltage

Connector coding and polarization

Current cycles

Heat ageing

Free fall

Dust resistance

Rapid change of temperature (thermal shock)

Temperature rise

PN-EN ISO 8092-2:2008

 
 
 

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Electrical connectors

Crimp resistance

(50 x 10-6 W to 1 W)

PN-EN ISO 60512-2-1:2006

PN-EN ISO 60512-2-2:2006

PN-EN 60352-2:2006

PN-EN 60352-2:2006/A1:2013-10

Connectors for electronic equipment

Contact resistance - millivolt level method

PN-EN 60512-2-1:2006

Contact resistance - test current method

PN-EN 60512-2-2:2006

Insulation resistance

PN-EN 60512-3-1:2005

Voltage stress test

PN-EN 60512-4-1:2006

Voltage proof of pre-insulated crimp barrels

PN-EN 60512-4-3:2006

Temperature rise

PN-EN 60512-5-1:2006

Current-carrying capacity tests with current-temperature derating

PN-EN 60512-5-2:2005

Current loading, cyclic

PN-EN 60512-9-5:2010

Climatic tests

PN-EN 60512-11-1:2002

PN-IEC 68-2-61:1994

PN-IEC 68-2-61:1994/Ap1:1999

Electrical and electronic equipment installed in L, M, N and O-category vehicles, supplied with 12 V and 24 V DC current

Measurements of emitted disturbances

ISO7637-2:2011

UNECE Regulation No. 10 Series 05 Annex 10

Resistance to transient conduction along supply lines: impulses 1, 2a, 2b, 3a, 3b, 4, 5a, 5b

ISO 7637-2:2011

ISO 16750-2:2012

UNECE Regulation No. 10 Series 05

Annex 10

Electrical and electronic equipment

Resistance to electrostatic discharges (ESD)

PN-EN 61000-4-2:2011

ISO 10605:2008


Rear-view mirrors for vehicles of categories L, M and N

Coefficient of reflection (total) of mirror surfaces

UNECE Regulation No. 46 Series 04 p.6.1.2.2

Laminated automotive glass for vehicles of categories L, M, N, O and T

Light transmission

Optical distortion

Secondary-image-separation test

Directive 92/22/EEC Annex II A, as amended, up to Directive 2001/92/EC Annex II B

Directive 2009/144/EC Annex III C updated by Directive 2010/62/EU

UNECE Regulation No. 43 Series 01 Annex 3, p. 9.1; 9.2; 9.3; 9.4;

ISO 3538:1997 p. 5.1; 5.2; 5.3

Mechanical strength

Directive 92/22/EEC Annex II A,
as amended, up to Directive 2001/92/EC Annex II B

Directive 2009/144/EC Annex III C updated by Directive 2010/62/EU UNECE Regulation No. 43 Series 01 Annex 3, p. 2.1, 2.2

ISO 3537:2015 p. 6,7

Resistance to:

-       high temperature

-       humidity

Directive 92/22/EEC Annex II A, as amended, up to Directive No. 2001/92/EC Annex II B

Directive 2009/144/EC Annex III C updated by Directive 2010/62/EU UNECE Regulation No. 43 Series 01 Annex 3, p. 5; 7

 
 
 

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Toughened automotive glass for vehicles of categories L, M, N, O and T

Light transmission

Optical distortion

Secondary-image-separation test

Directive 92/22/EEC Annex II A,, as amended, up to Directive 2001/92/EC Annex II B

Directive 2009/144/EC Annex III C updated by Directive 2010/62/EU UNECE Regulation No. 43 Series 01 Annex 3, p. 9.1; 9.2; 9.3; 9.4

ISO 3538:1997 p. 5.1; 5.2; 5.3

Mechanical strength

Directive 92/22/EEC Annex II A, as amended, up to Directive 2001/92/EC Annex II B

Directive 2009/144/EC Annex III C  updated by Directive 2010/62/EU

UNECE Regulation No. 43 Series 01 Annex 3, p. 2.1; 2.2;

ISO 3537:2015 p. 6; 7

Toughened automotive glass for L, M, N, O and T-category vehicles

Fragmentation

Directive 92/22/EEC Annex II A, as amended up to Directive 2001/92/EC Annex II B

Directive 2009/144/EC Annex III C updated by Directive 2010/62/EU UNECE Regulation No. 43 Series 01 Annex 3, p. 1

ISO 3537:2015 p. 9

Heated rear windows (backlights)

Power of heating circuit

Circuit continuity

Temperature rise

Defrosting

Heat-shock resistance

Durability of heating circuit

Abrasion resistance

BOSMAL/I-7-85/02

Advance-warning triangles

Colour

Coefficient of luminous intensity

Luminance factor

UN ECE Regulation No. 27 Series 04

 

Retro-reflective devices for L, M, N, O and T-category vehicles

Colour

UNECE Regulation No. 3 Series 02

Directive76/757/EEC Annex VII, as amended up toDirective2006/96/EC Annex II

Coefficient of luminous intensity

 

UNECE Regulation No. 3 Series 02

Directive 76/757/EEC Annex VII, as amended up toDirective2006/96/EC Annex II

Vertical traffic signs

Colour

WT-ITS/19/94-PLE ed. 6 (04.06.2004)
p. 5.6.4

PN- EN 12899-1:2010 p. 4.1.1.3

Coefficient of luminous intensity

 

WT-ITS/19/94-PLE ed. 6 (04.06.2004) 
p. 5.6.5

PN-EN 12899-1:2010 p. 4.1.1.4

Marking plates for slow-moving M, N, O and T-category vehicles and

mobile machinery

 

Colour

PN-S-73102:1994 p. 4.6.3

UNECE Regulation No. 69 Series 01 Annex 6

Coefficient of luminous intensity

 

PN-S-73102:1994 p. 4.6.4

Regulation No. 69 UNECE Series 01 Annex 7

Marking plates for heavy and long vehicles

Colour

UNECE Regulation No. 70 Series 01

Coefficient of luminous intensity

UNECE Regulation No. 70 Series 01

 
 

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Direction indicators lights for vehicles of categories L, M, N, O and T

Colour of light

Luminous intensity

UN ECE Regulation No. 6 Series 01 p. 6; 8

Directive76/759/EEC Annex 0 p. 6; 8, as amended up to Directive2006/96/EC Annex II

Front and rear position (side) lights for vehicles of categories L, M, N, O and T

Colour of light

Luminous intensity

UN ECE Regulation No. 7 Series 02 p. 6; 8

Directive76/758/EEC Annex 0 p. 6; as amended, up to Directive 2006/96/EC  Annex II

Stop lights for vehicles of categories L, M, N, O and T

Colour of light

Luminous intensity

UN ECE Regulation No. 7 Series 02 p. 6; 8

Directive76/758/EEC Annex 0 p. 6; 8, as amended, up to Directive 2006/96/EC
Annex II

Rear fog lights for vehicles of categories L3, L4, L5, L7, M, N, O and T

Colour of light

Luminous intensity

UN ECE Regulation No. 38 Series 00   Directive77/538/EEC Annex 0 p. 3; 6, as amended, up to Directive 2006/96/EC Annex II

Reversing lamps for vehicles of categories M, N, O and T

Colour of light

Luminous intensity

UN ECE Regulation No. 23 Series 00 p. 6; 8

Directive 77/539/EEC Annex 0 p. 6; 8, as amended, up to Directive2006/96/EC Annex II

Light-signalling devices for vehicles of category L

Colour of light

Luminous intensity

Luminance

UN ECE Regulation No. 50 Series 00

BOSMAL/I-7-84/02

CIE 15:2004

CIE 15:2018

Headlamps for vehicles of categories L, M, N and T

Colour of light

Luminous intensity

Illuminance

 

UN ECE Regulation No. 1 Series 02

UN ECE Regulation No. 5 Series 03

UN ECE Regulation No. 8 Series 05

UN ECE Regulation No. 19 Series 04

UN ECE Regulation No. 20 Series 03

UN ECE Regulation No. 31 Series 03

UN ECE Regulation No. 56 Series 01

UN ECE Regulation No. 57 Series 02

UN ECE Regulation No. 72 Series 01

UN ECE Regulation No. 82 Series 01

UN ECE Regulation No. 98 Series 01

UN ECE Regulation No. 112 Series 01

UN ECE Regulation No. 113 Series 02

UN ECE Regulation No. 123 Series 01

BOSMAL/I-7-84/02

CIE 15:2004

CIE 15:2018

Special warning lamps

Warning and safety light devices

Obstruction lights

 

Luminous intensity/ Effective luminous intensity

Frequency of pulse

Colour of light

UN ECE Regulation No. 65 Series 00

PN-EN 12352:2010

ICAO 9157 PART 4 “Aerodrome Design Manual” ed. 4 – 2004

BOSMAL/I-7-84/02

CIE 15:2004

CIE 15:2018

 
 

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Solid electrical insulating materials

Surface resistance

Volume resistance

Resistance to the grounding element

Resistance between points (range up to 100 TΩ)

Dielectric strength

(voltage up to 35 kV, current up to 1 A)

BOSMAL/I-7-65/02

PN-EN 61340-2-3:2002

PN-EN 62631-1:2011

PN-EN 62631-3-1:2016-10

PN-EN 62631-3-2:2016-04

PN-EN 62631-3-3:2016-08

PN-EN 60243-1:2013-12

Safety glazing materials (glass, transparent polymers)for vehicles of categories L, M, N, O and T

Haze by spectrophotometric method

ISO 3537:2015

ASTM D1003:2013

BOSMAL/I-7-72/02

UN ECE Regulation No. 43 Series 01 Annex 3 p. 4

ANSI/SAE Z-26.1:1996

Products from plastic, glass, textiles, nonwovens, foams, rubber, coatings (including painting ones)

Colour of materials reflecting and transmitting light

BOSMAL/I-7-66/02

PN-EN ISO 105-A05:2000

PN-EN ISO 105-J01:2002

PN-EN ISO 105-J03:2009

PN-ISO 7724-1:2003

PN-ISO 7724-2:2003

PN-ISO 7724-3:2003

CIE 15:2004

CIE 15:2018

DIN 53236:2018-02

SAE J1545:2014-10

PN-EN ISO 11664-1:2011

PN-EN ISO 11664-2:2011

PN-EN ISO 11664-3:2013-08

PN-EN ISO 11664-4:2011

PN-EN ISO 11664-5:2016-10

PN-EN ISO 11664-6:2016-09

Delineator posts and retroreflectors

Colour

Luminance factor

Coefficient of luminous intensity

PN-EN 12899-3:2010

High-visibility warning clothes and accessories

Colour

Coefficient of retroreflection

PN-EN ISO 20471:2013-07

PN-EN 1150:2001

PN-EN 13356:2004

Reflective materials and devices

Coefficient of luminous intensity

Coefficient of retroreflection

CIE 54.2:2001

Devices for illuminating rear registration plates of category M, N, O ,T vehicles

Luminance

Angle of incindence of light

Colour

UN ECE Regulation No. 4 Series 00

Category M, N, T vehicle parking lights

Luminous intensity

Colour

UN ECE Regulation No. 77 Series 00

Category L, M, N, T vehicle daytime running lights

Luminous intensity

Colour

UN ECE Regulation No. 87 Series 00

Category L, M, N, O, T vehicle side-marker lights

Luminous intensity

Colour

UN ECE Regulation No. 91 Series 00

Category M, N, O vehicle retro-reflective marking

Coefficient of luminous intensity

Colour

UN ECE Regulation No. 104 Series 00

Category M, N, T vehicle cornering lights

Luminous intensity

Colour

UN ECE Regulation No. 119 Series 01

 
 
 

Road Testing Department (BD)

Sarni Stok 93, 43-300 Bielsko-Biała

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Vehicles of category M1

Useful trunk capacity by use the measuring cuboids method

ISO 3832:2002

Wind screen defrosting and demisting

Regulation (EU) No. 672/2010 Annex II
p. 2

Weight and its distribution on each axle, sides and wheels by use portable weighing platforms
Range: 150 to 6000kg on single wheel

PN-ISO 2416:1997

Directive95/48/EC App. to Annex II

Interior heating effectiveness
by measuring temperatures at certain locations of the car while driving

BOSMAL/I-7-62/03

Vehicles of categories M1 and N1

Wheel setting geometry:

Range of measurement:

- wheel convergence: ± 3°

- wheel's angle of heel: ± 5°

- stub-axle's angle of heel: ± 18°

- stub-axle's castor angle: ±18°

- wheel's steering angle: ± 20°

- front wheels' displacement: ± 2°

BOSMAL/I-7-11/04

Centre of gravity situation
by car’s weight
method horizontally and with one axle upraised

ISO 10392:2011 w/o p.7

Maximum speed by non-contact method on a straight track or oval ring

Range: up to 190 km/h

BOSMAL/I-7-83/02

UN ECERegulation No. 68 Series 00
p. 5.5.1; 5.5.3; 5.5.4

 

Acceleration intensity
by non-contact method on a straight track

Range: up to 190 km/h

BOSMAL/I-7-83/02

Incorrectness of odometer's readings
by comparison with values measured by non-contact method

BOSMAL/I-7-59/03

Incorrectness of speedometer's readings
by comparison with values measured by non-contact method

UN ECE Regulation No. 39 Series 01
p. 5.3

Fuel consumption characteristics
by volumetric method in the road test

Range: 60 l/h

BOSMAL/I-7-58/02

Fuel consumption at constant speed
by volumetric method in the road test

Range: 60 l/h

UN ECE Regulation No. 84 Series 00
Annex 4, p.3.3.1

Oil consumption under on-road conditions
by gravimetric method

BOSMAL/I-7-13/07

 

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Vehicles of categories M1 and N1

Tire tread abrasibility under on-road conditions
by supervised exploitation method

BOSMAL/I-7-92/02

U-turn diameter
by marking
drive track with liquid under the moving vehicle

BOSMAL/I-7-60/02

Durability, reliability and functionality during mileage accumulation over various routes

BOSMAL/I-7-61/03

Vehicles of categories M1 and N1with hydraulic brakes

Braking systems efficiency
by road and speed measured by non-contact method

UN ECE Regulation No. 13 Series 11 Annex No. 4 (w/o Annex No. 13)
UN ECE Regulation No. 13H
Series 01 Annex No. 3 (w/o Annex No. 6)
UN ECE Regulation No. 90
Series 02 Annex No. 3 (w/o p. 2.2)
and Annex No. 11 (w/o p. 3 and 4)
Directive 98/12/EC Annex II

Vehicles of categories M1, N1 and N2

In-use fuel consumption
by volumetric method
in the road test Range: 60 l/h

BOSMAL/I-7-12/04

Car parts, sub-assemblies and sets

Assemblability in workshop conditions

BOSMAL/I-7-14/03

Vehicles of categories M2 and M3

Fuel consumption in SORT road cycle

Volumetric method in the road test

Range: 60 l/h

UITP Project SORT Standardized On-Road Test Cycles New Edition UITP 2014 D/2014/0105/1

Vehicles of categories M1, N1 and T

Engine starting efficiency under different temperature conditions

Range of temperature: (-40 to +50) oC

BOSMAL/I-7-73/01

Vehicles of category T

Maximum design speed

Directive2009/60/EC corrected by Directive2010/62/EC

Checking the speed regulator

regarding the maximum design speed

Directive2009/144/EC corrected by Directive2010/52/EC and by
Directive 2010/62/EC

Effectiveness of the braking systemsby measuring the braking distance and delay as well as speed by non-contact method

Directive76/432/EEC App. II
as amended, up to Directive97/54/EC

Mechanical coupling components of combinations of vehicles

The installation and the position on the vehicle

UN ECE Regulation No. 55 Series 01, Annex No. 7

Vehicles of category N

Dimensions of vehicle external projections by use of models and special equipment

UNECE Regulation No. 61 Series 00

Vehicles of categories M, N and O

Installation of tyres

Commission Regulation (EU) 458/2011

 

Gauge and Standards Room - Metrology (BP)

Sarni Stok 93, 43-300 Bielsko-Biała

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Metal, plastic (stiff) and glass products

External, internal, mixed and indirect dimensions:

- up to 5000 mm on the surface

by direct, comparison method
(with accuracy up to 1 mm),
- up to 3000 mm by direct, coordinate, contact method (with accuracy up to 0.005 mm),

- up to 300 mm
by direct, contact-free method

(with accuracy up to 0.001 mm)

- up to 200 mm
by direct, differential method
(with accuracy up to 0.001 mm)

BOSMAL/I-7-32/05
BOSMAL/I-7-78/01
BOSMAL/I-7-79/01
BOSMAL/I-7-80/02
BOSMAL/I-7-81/02
BOSMAL/I-7-82/01

Angular dimensions:

- arm of an angle up to 3000 mm
by direct, contact method
(with accuracy up to 1')

- arm of an angle up to 300 mm
by direct, contact-free method
(with accuracy up to 10')

BOSMAL/I-7-32/05
BOSMAL/I-7-79/01
BOSMAL/I-7-80/02
BOSMAL/I-7-81/02
BOSMAL/I-7-82/01

Surface roughness:

- parameters defined in the norm
 PN-ENISO 4287:1999
by direct, contact method

with accuracy up to 0.02 µm

- flat surfaces,

- cylindrical surfaces along axis of symmetry

PN-EN ISO 4288:2011

Shape deviations:

a) straightness by direct, contact method

- up to 3000 mm
(with accuracy up to 0.005 mm),

b) flatness

- max. surface 3000x1200 mm
by direct, contact method

c) circularity by direct, contact method

- up to Ø 1200 mm
(with accuracy up to 0.005 mm),

d) cylindricity by direct, contact method

- up to Ø 1200 mm and L <3000 mm
(with accuracy up to 0.005 mm).

BOSMAL/I-7-32/05
BOSMAL/I-7-78/01
BOSMAL/I-7-79/01
BOSMAL/I-7-80/02
BOSMAL/I-7-81/02
BOSMAL/I-7-82/01

 

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Metal, plastic (stiff) and glass products

Position deviations:

a) parallelism

- up to 3000 mm by direct, contact method (with accuracy up to 0.005 mm),

- up to 300 mm by direct, contact-free method (with accuracy up to 0.002 mm)

b) perpendicularity

- up to 3000 mm by direct, contact method (with accuracy up to 0.005 mm)

- up to 300 mm by direct, contact-free method (with accuracy up to 0.002 mm)

c) position

- up to 3000 mm by direct, contact method (with accuracy up to 0.005 mm)

- up to 300 mm by direct, contact-free method (with accuracy up to 0.002 mm)

d) concentricity

- up to 1200 mm by direct, contact method(with accuracy up to 0.005 mm)

- up to 300 mm by direct, contact-free method (with accuracy up to 0.002 mm)

e) coaxiality

- up to 1200 mm by direct, contact method(with accuracy up to0.005 mm)

- up to 300 mm by direct, contact-free method (with accuracy up to 0.002 mm)

f) symmetry

- up to 3000 mm by direct, contact method (with accuracy up to 0.005 mm)

- up to 300 mm direct, contact-free method (with accuracy up to 0.002 mm)

Complexity deviation

- radial and axis run-out

BOSMAL/I-7-32/05
BOSMAL/I-7-78/01
BOSMAL/I-7-79/01
BOSMAL/I-7-80/02
BOSMAL/I-7-81/02
BOSMAL/I-7-82/01

Pitch diameter of external, metric thread

M4 to M32 three measuring wires method

(with accuracy up to 0.002 mm)

BOSMAL/I-7-36/03

Internal, metric thread dimensions

M4 to M32 - by plug gauge

PN-ISO 1502:1998

 

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Rubber and plastic products (flexible)

with limitations as a result of flexibility of the objects

External, internal, mixed, indirect dimensions:

- up to 5000 mm on the surface
by direct, comparison method
(with accuracy up to 1 mm),

- up to 3000 mm
by direct, contact method
(with accuracy up to 0.2 mm),

- up to 300 mm
by direct, contact-free method
(with accuracy up to 0.1 mm)

BOSMAL/I-7-32/05
BOSMAL/I-7-79/01
BOSMAL/I-7-81/02
BOSMAL/I-7-82/01

Angular dimensions:

- arm of an angle up to 3000 mm
by indirect, contact method
(with accuracy up to 20'),

- arm of an angle up to 300 mm
by direct, contact-free method
(with accuracy up to 10')

BOSMAL/I-7-32/05
BOSMAL/I-7-79/01
BOSMAL/I-7-81/02
BOSMAL/I-7-82/01

 
 
 

 

Type of operation: Performance of vehicle EC type or vehicle type approval tests

 

Vehicle category

 

Legal basis

M, N, O

Directive 2007/46/EC of the European Parliament and of the Council of 5 September 2007

ACT of 20 June 1997 - Road Traffic Law

Regulation of the Minister of Transport, Construction and Maritime Economy of 25 March 2013 on the type approval of automobile vehicles, trailers, components of their equipment and parts

Procedure BOSMAL/P-1-20/06

T, R, C

Regulation (EU) 167/2013 from 05.02.2013.

ACT of 20 June 1997 - Road Traffic Law

Regulation of the Minister of Transport, Construction and Maritime Economy of 18 June 2013

Procedure BOSMAL/P-1-20/06

L

 

Regulation (EU) 168/2013 from 15.01.2013

ACT of 20 June 1997 - Road Traffic Law

Regulation of the Minister of Transport, Construction and Maritime Economy of 17 June 2013

Procedure BOSMAL/P-1-20/06

S

Regulation (EU) 167/2013 from 05.02.2013

Procedure BOSMAL/P-1-20/06

 
 
 
 
 
 
 
 
 
 

Type of operation:

Legal basis:

Equipment component or part approval tests

Act of 20 June 1997 - Road Traffic Law

Procedure BOSMAL/P-1-20/06

M1, M2, N1, N2

Emissions (Euro 5 and 6) from light vehicles /access to information

Regulation (EC) 715/2007

Regulation (EC) 692/2008

M, N

Emissions (Euro VI) from heavy vehicles / access to information

Regulation (EC) 595/2009

Regulation (EU) 582/2011

M1

Windscreen defrosting and demisting systems

Regulation (EU) 672/2010

Pojazdy kat. M, N, O

Space for mounting and fixing of rear registration plates

Regulation (EU) 1003/2010

M, N

Towing devices

Regulation (EU) 1005/2010

Pojazdy kat. M, N, O

Manufacturer’s statutory plate and vehicle identification number

Regulation (EU) 19/2011

N, O

Wheel spray suppression system

Regulation (EU) 109/2011

M, N, O

Installation of tyres

Regulation (EU) 458/2011

M, N

Vehicle access and manoeuvrability

Regulation (EU) 130/2012

M, N, O

Masses and dimensions of motor vehicles 

Regulation (EU) 1230/2012

L

Environmental and propulsion unit performance requirements

Regulation (EU) 134/2014

 

-

Engines for non-road mobile machinery

Requirements relating to limits of gaseous and particulate pollutant emissions from these engines

Regulation (EU) 2016/1628

N2, N3

CO2 emissions and fuel consumption of heavy-duty vehicles

Regulation (EU) 2017/2400

T, C

Environmental and propulsion unit performance requirements for agricultural and forestry vehicles and their engines

Regulation (EU) 2018/985

-

Automobile headlamps with asymmetric dipped lights or high beam lights and category R2 or HS1 bulbs

UN ECE Regulation No. 1

L, M, N, O, T

Retro-reflecting devices of motor vehicles and their trailers

UN ECE Regulation No. 3

M, N, O, T

Devices for illuminating rear registration plates of motor vehicles and their trailers

UN ECE Regulation No. 4

T

”Sealed beam” (SB) type headlamps with European asymmetric dipped lights or high beam lights

UN ECE Regulation No. 5

L, M, N, O, T

Direction indicators of motor vehicles and their trailers

UN ECE Regulation No. 6

L, M, N, O, T

Front and rear position lamps, stop lamps and end-outline marker lamps of motor vehicles and their trailers

UN ECE Regulation No. 7

-

Headlamps of automobile vehicles with asymmetric dipped lights or high beam lights and halogen bulbs (H1, H2, H3, HB3, HB4, H7, H8, H9, HIR1, HIR2 or H11)

UN ECE Regulation No. 8

 

Type of operation:

Legal basis:

Equipment component or part approval tests

Act of 20 June 1997 - Road Traffic Law

Procedure BOSMAL/P-1-20/06

M, N, O, L

Electromagnetic compatibility

UN ECE Regulation No. 10

M2, M3, N, O

Vehicles and trailers with regard to braking

UN ECE Regulation No. 13

M1, N1

Passenger cars with regard to braking

UN ECE Regulation No. 13H

L3, L4, L5, L7, M, N, T

Front fog lamps of motor vehicles

 

UN ECE Regulation No. 19

-

Automobile headlamps with asymmetric dipped lights or high beam lights and halogen bulbs (H4 bulbs)

UN ECE Regulation No. 20

M, N, O, T

Reversing lamps of motor vehicles and their trailers

UN ECE Regulation No. 23

-

Approval of compression ignition engines with regard to the emission of visible pollutants

Approval of motor vehicles with regard to the installation of compression ignition engines of an approved type

Approval of motor vehicles equipped with compression ignition engines with regard to the emission of visible pollutants by the engine

Measurement of power of compression ignition engines

UN ECE Regulation No. 24

-

Warning triangles

UN ECE Regulation No. 27

M, N, T

Automobile „sealed beam” type halogen headlamps with European asymmetrical dipped lights or high beam lights or both

UN ECE Regulation No. 31

L3, L4, L5, L7, M, N, O, T

Rear fog lamps for power-driven vehicles and their trailers

UN ECE Regulation No. 38

M, N, L

Speedometer unit and its installation

UN ECE Regulation No. 39

M, N, O, L, T

Safety glazing materials and their installation on vehicles

UN ECE Regulation No. 43

M, N, L

Devices for indirect vision and their installation

UN ECE Regulation No. 46

M, N, O

Installation of lighting and light-signalling devices in vehicles

UN ECE Regulation No. 48

M, N

Emission of gaseous and particulate pollutants from compression-ignition engines and from positive-ignition engines used in vehicles

UN ECE Regulation No. 49

L

Front and rear position lamps, stop lamps, direction indicators and rear registration-plate illumination for vehicles of category L

UN ECE Regulation No. 50

M, N

External noise level while driving and parking

UN ECE Regulation No. 51

M, N, O

Mechanical coupling parts of vehicle units

UN ECE Regulation No. 55

 
 

Type of operation:

Legal basis:

Equipment component or part approval tests

Act of 20 June 1997 - Law on Road Traffic

Procedure BOSMAL/P-1-20/06

L1, L2

Headlamps for mopeds and vehicles treated as such

UN ECE Regulation No. 56

L3, L4, L5

Headlamps for motor cycles

UN ECE Regulation No. 57

M, N, O

Rear underrun protection devices (RUPD) and their installation

UN ECE Regulation No. 58

M1, N1

Replacement silencing systems

UN ECE Regulation No. 59

N

Commercial vehicles with regard to their external projections forward of the cab’s rear panel

UN ECE Regulation No. 61

-

Warning lamps of motor vehicles and their trailers

UN ECE Regulation No. 65

M1, N1

Measurement of the maximum speed

UN ECE Regulation No. 68

M, N, O, T

Rear marking plates for slow-moving vehicles (by design) and their trailers

UN ECE Regulation No. 69

M, N3, O

Rear marking plates for heavy and long vehicles

UN ECE Regulation No. 70

L, M, N, T

Motorcycle headlamps with asymmetric dipped lights or high beam lights equipped with halogen bulbs (HS1)

UN ECE Regulation No. 72

N2, N3, O3, O4

Lateral protection device (LPD) and its installation

UN ECE Regulation No. 73

M, N, T

Parking lamps of motor vehicles

 

UN ECE Regulation No. 77

L1, L2, L3, L4, L5

Approval of parking lamps for category L1, L2, L3, L4 and L5 vehicles

UN ECE Regulation No. 78

L, M, N, T

Moped headlamps equipped with halogen bulbs (HS2)

UN ECE Regulation No. 82

M1, M2, N1, N2

Approval of vehicles with regard to the emission of pollutants according to engine fuel requirements

UN ECE Regulation No. 83

M1, N1

Measurement of fuel consumption

UN ECE Regulation No. 84

M, N

Approval of internal combustion engines or electric drive trains intended for the propulsion of motor vehicles of categories M and N with regard to the measurement of net power and the maximum 30-minute power of electric drive trains

UN ECE Regulation No. 85

M, N

Daytime running lamps for motor vehicles

UN ECE Regulation No. 87

M, N, O, L

Replacement brake lining assemblies and drum brake linings for motor vehicles and their trailers

UN ECE Regulation No. 90