Scope of Accreditation of the Testing Laboratory No. AB 128 (02.08.2018) (EN)

Scope of Accreditation of the Testing Laboratory No. AB 128

SCOPE OF ACCREDITATION OF THE TESTING LABORATORY No. AB 128

Issued by:

POLISH CENTRE FOR ACCREDITATION

01-382 Warszawa, Szczotkarska 42

Issue No. 18, Date of issue 17th July 2019

NOTE: This scope of accreditation is BOSMAL's translation. In the events of discrepancies, only the original PCA document is binding. You can find it at www.pca.gov.pl and here: Scope of Accreditation of the Testing Laboratory No. AB 128, issue No. 18, date of issue 17th July 2019

AB 128	Name and address of the organization: BOSMAL AUTOMOTIVE RESEARCH & DEVELOPMENT INSTITUTE LTD TESTING LABORATORY Sarni Stok 93 43-300 Bielsko-Biała
Identification Code of domain/object (objects) of tests:	Domain of the tests / test objects:
A/6; A/26	Acoustic and vibration tests of electric components and vehicle equipment
C/4 ;C/8; C/9 C/10; C/12; C/21; C/23	Chemical testing, chemical analysis of chemicals, environmental samples, fuels and lubricants, glass and ceramics, plastic, rubber products, textiles, leather and fabrics
E/6; E/26	Electric and electronic tests of electrical and electronic components and vehicles
F/6	Electromagnetic compatibility (EMC) tests of electrical and electronic equipment
G/6; G/8; G/21; G/23; G/26	Tests concerning environmental engineering of electrical and electronic equipment, construction products and materials, including plastic and rubber products, textiles and leather and vehicles
H/21; H/23	Fire tests of plastic and rubber products, textiles and leather
J/6; J/8; J/21; J/23	Mechanical properties testing, metallographic analyses of electrical and electronic equipment, construction products and materials, including plastic and rubber products, textiles and leather and vehicles

Page version: A

This document is an attachment to the Accreditation Certificate No. AB 128 of 17.07.2019.

Accreditation cycle from 17.07.2019 to 17.07.2023
The status of accreditation and validity of the scope of accreditation can be confirmed at PCA website www.pca.gov.pl

BOSMAL translation of Issue No. 18, Date of issue 17th July 2019 page 1/44

AB 128	Name and address of the organization: BOSMAL AUTOMOTIVE RESEARCH & DEVELOPMENT INSTITUTE LTD TESTING LABORATORY Sarni Stok 93 43-300 Bielsko-Biała
Identification Code of domain/object (objects) of tests:	Field of testing and item
L/8	Non-destructive testing of metal products and materials
N/6; N/8; N/10; N/12; N/13; N/19; N/21; N/23; N/26	Physical properties testing of electrical and electronic equipment, construction products and materials, including glass and ceramics, plastic and rubber products, personal protective equipment, fuels and lubricants, textiles and leather and vehicles
Q/8; Q/21; Q/23	Sensory testing of construction products and materials, plastic and rubber products, textiles and fabrics
Conformity assessment within to the Act of 20 June 1997 – Law on Road Traffic

Page version: A

This document is an attachment to the Accreditation Certificate No. AB 128 of 17.07.2019.
Accreditation cycle from 17.07.2019 to 17.07.2023
The status of accreditation and validity of the scope of accreditation can be confirmed at PCA website www.pca.gov.pl

BOSMAL translation of Issue No. 18, Date of issue 17th July 2019 page 2/44

Materials Testing Department (BM) Sarni Stok 93, 43-300 Bielsko-Biała
Tested object / product	Type of activity/tested characteristics/test methods	Reference documents
Rubber and plastic products	Material identification Infrared spectrometric method (FTIR)	BOSMAL/I-7-41/05
Rubber and plastic products	Hardness: Range (35 - 100) °Sh	PN-EN ISO 868:2005 met. A & D
Rubber products	Hardness: Range: (30 - 100) IRHD	ISO 48-2:2018 met. M (mikro)
	Strength properties: - tensile strength (up to 5 kN)	PN-ISO 37:2007 PN-ISO 37:2007/AC1:2008 ISO 37:2017
	- tear strength (up to 5 kN)	ISO 34-1:2015
	- compression set [temperature range: +250^oC – (-40)^oC]	ISO 815-1:2014 ISO 815-2:2014
	Hysteresis in compression stresses	PN-C-04289:1987
	Resistance to ageing: - in air	ISO 188:2011
	- in liquids	ISO 1817:2015
	- in ozone atmosphere (static method) 25 pphm to 200 pphm	ISO 1431-1:2012 (p.10)
	Density Gravimetric method	ISO 2781:2018
	Brittleness temperature Range: up to -70°C Impact method	ISO 812:2017
Plastic products	Density Immersion method	PN-EN ISO 1183-1:2013-06 met.A
	Rockwell hardness (HRR, HRL, HRM, HRE) Range: (0 - 130) HR Rockwell method	PN-EN ISO 2039-2:2002
	Impact properties Range: impact energy up to 50 J Charpy method	PN-EN ISO 179-1:2010
	Izod method	PN-EN ISO 180:2004 PN-EN ISO 180:2004/A1:2007 PN-EN ISO 180:2004/A2:2013-07
	Hardness Ball indentation method	PN-EN ISO 2039-1:2004
	Tensile strength (up to 30 kN)	PN-EN ISO 527-2:2012
	Flexural strength Range: 100 N to 30 kN	PN-EN ISO 178:2011 PN-EN ISO 178:2011/A1:2013-06
	Flexural modulus (up to 30 kN)	PN-EN ISO 178:2011 PN-EN ISO 178:2011/A1:2013-06
	Heat resistance: - deflection temperature (up to 300^oC)	PN-EN ISO 75-1:2013-06 PN-EN ISO 75-2:2013-06
	Vicat softening temperature (up to 300^oC)	PN-EN ISO 306:2014-02
	Water absorption	PN-EN ISO 62:2008 Ziff. 6.3, 6.4, 6.6
	Content of volatile substances (including water)	BOSMAL/l-7-49/05
	Melting point and glass transition temperature Range: 30°C above the extrapolated end of transition Differential scanning calorimetry method (DSC)	BOSMAL/I-7-87/02 PN-EN ISO 11357-2:2014-06 PN-EN ISO 11357-3:2018-06

Page version: A

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Plastic products

Polymers decomposition temperature
and decomposition rate,

Measurement of volatile substances, additives and/or fillers quantity in polymer

Thermogravimetry (TGA)

Range: (25 to 1000)°C

PN-EN ISO 11358-1:2014-09

PV 3927:1992

ASTM D6370-99 (2014)

Products made of: metal, plastic, textiles, nonwoven materials, foams, rubber, paint-coated, galvanic-coated and uncoated

Resistance to light
(Fade-Ometer)

BOSMAL/I-7-02/05

PN-EN ISO 4892-2:2013-06 met.B

PN-EN ISO 16474-1:2014-02

PN-EN ISO 16474-1:2014-02, met.B

PN-EN ISO 105-B02:2014-11

GMW 14162:2016 met. A, B, D

Resistance to weather conditions
(Weather-Ometer)

PN-EN ISO 4892-2:2013-06, met. A

PN-EN ISO 16474-1:2014-02

PN-EN ISO 16474-1:2014-02, met.A

PN-EN ISO 105-B04:1999

Flammability

Burning rate

Range: (0 to 300) mm/min

Horizontal burning method

PN-ISO 3795:1996

UN ECE Regulation No. 118 Series 03

DIN 75200:1980-09

FMVSS 302:1999

Gloss value at 20^o, 60^o and 85^o
Range: (0 to 199) gloss units

PN-EN ISO 2813:2014-11

Resistance to humidity

PN-EN ISO 6270-1:2018-02

PN-EN ISO 6270-2:2018-02

PN-EN 60068-2-78:2013-11

Resistance to climatic conditions

PN-EN 60068-2-14:2009, Test Nb

Fogging
Range: (0 to 199) gloss units
Gloss method

Range: (0.1 to 5.0) mg
Gravimetric method

DIN 75201:2011-11

SAE J1756:2006-08

PV 3015: 2019

Formaldehyde emission

Range: (0.15 to 3) μg/ml
Spectrophotometric method

VDA 275 (07.1994)

PV 3925:2009

VCS 1027,2739 (03.2004)

FLTM BZ 156-01:2011 Part A

Determination of organic compounds emissions (TVOC) from materials
Range: TVOC (0,13 - 3741) μgC/g

Gas chromatography method with headspace analysis, flame ionization detection and mass spectrometry detection

HS-GC-MS/FID method

BOSMAL/I-7-64/04

VDA 277 (01.1995)

FLTM BZ 157-01:2011

PV 3341:1995

VCS 1027,2749 (03.2004)

Identification of organic compounds

GC-MS method with the use of NIST 14 mass spectral library

BOSMAL/I-7-64/04

Determination of organic compounds emissions (VOC, FOG) from materials

Range:

VOC: (0,1 - 15500) μg/g

FOG: (0,7 - 53815) μg/g

Gas chromatography method with thermodesorption, flame ionization detection and mass spectrometry detection

(TD-GC-MS/FID) method

BOSMAL/I-7-64/04

VDA 278 (10.2011)

GMW 15634:2014

Ash content

Range: (0,010 - 75,00)%

Gravimetric method

PN-EN ISO 3451-1:2019-04 met. A PN-EN ISO 1172:2002 met. A

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Products made of: metal, plastic, textiles, nonwoven materials, foams, rubber, paint-coated, galvanic-coated and uncoated

Resistance to impact (Pistol Test)

Dynamic method with a ball impact

Range: (1 to 90) N

ISO 4532:1991

Determination of stone-chip (grit) resistance of coatings.

Multi-impact and single impact methods

PN-EN ISO 20567-1:2017-03

DIN 55996-1:2001-04

Test for sealing by water immersion method

Method 2

PN-EN 60068-2-17:2001, Test Qc

Plastic products, textiles, nonwoven materials, foams, rubber, coated and uncoated

Odour

Range (1 to 6) grades

Sensoric method

VDA 270:2016

PV 3900:2000

FLTM BO 131-03:2017

Plastic products, textiles, nonwoven materials, foams, rubber and leather

Volatile organic compounds emission (VOC)
Chamber method
Determination of total volatile organic compounds (VOC) concentration
Range: (0.1 to 30) ppm
Flame-ionisation detection method (FID)

ISO 12219-4:2013

ISO 12219-6:2017

GS 97014-3:2014

VDA 276-1:2005

PV 3942:2016

Determination of formaldehyde and other carbonyl compounds emitted in environmental chamber

Range:

Formaldehyde (2,0 - 4826) μg/m³

Acetaldehyde (2,0 - 4926) μg/m³

Acetone (1,0 - 4989) μg/m³

Acrolein (2,0 - 4660) μg/m³

Isovaleraldehyde (4,0 - 4995) μg/m³

Crotonaldehyde (3,0 - 4721) μg/m³

Propionaldehyde (3,0 - 5018)μg/m³

m,p-Tolualdehyde (5,0 - 4965) μg/m³

o-Tolualdehyde (5,0 - 4963) μg/m³

Valeraldehyde (4,0 - 4732) μg/m³

Benzaldehyde (2,0 - 4892) μg/m³

2-Butanone (4,0 - 4929) μg/m³

Butyraldehyde (4,0 - 4961) μg/m³

2,5-Dimethylbenzaldehyde (4,0 - 4862) μg/m³

Cyclohexanone (4,0 - 4662) μg/m³

Hexanal (4,0 - 5157) μg/m³

Heptanal (2,0 - 5442) μg/m³

Octanal (3,0 - 6266) μg/m³

Nonanal (4,0 - 6565) μg/m³

Decanal (9,0 - 4756) μg/m³

Metacroleine (4,0 - 4827) μg/m³

High performance liquid chromatography method with diode array detection method (HPLC-DAD)

ISO 16000-3:2011

BOSMAL/I-7-89/01

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Plastic products, textiles, nonwoven materials, foams, rubber and leather

Determination of volatile organic compounds (VOC) emitted in environmental chamber

Range:

- total (0.050 to 10.0) mg/m3

- individual (1.0 to 350) μg/m3

Gas chromatography with thermal desorption

flame-ionization detection and mass spectrometry

(TD-GC-FID-MS)

ISO 16000-6:2011

Identification of organic compounds

Gas chromatography method with thermal desorption and mass spectrometry (TD-GC-MS) with use of NIST14 mass spectra library

ISO 16000-6:2011

Products made of: metal, plastic, paint-coated, galvanic-coated and uncoated

Lead and Cadmium content

Range: Pb (0.002 to 0.1) %

Cd (0.001 to 0.1) %

Inductively coupled plasma optical emission spectrometry (ICP-OES) method

BOSMAL/I-7-43/06

Galvanic coatings and paint coatings on metal and plastic (metal products and plastic products)

Chromium (Cr VI) content

Range: (0.01 to 1) μg/cm²

Spectrophotometric method

PN-EN ISO 3613:2011

Corrosion resistance to variable environmental salt-humid conditions

ASTM G85–11, met. A3

PN-EN ISO 11997-1:2017-10, cycle B

VDA 621-415:1982

Resistance to corrosion in salt spray

NSS method

ISO 9227:2017

ASTM B117-18

DIN 50021:1988-06

FIAT 50180 (12.2007)

Resistance to corrosion in salt spray

AASS method

ISO 9227:2017

DIN 50021:1988-06

FIAT 50180 (12.2007)

Resistance to corrosion in salt spray

CASS method

ISO 9227:2017

DIN 50021:1988-06

FIAT 50180 (12.2007)

Corrosion resistance to sulfur dioxide with general condensation of moisture

PN-EN ISO 6988:2000

PN-EN ISO 3231:2000

Adhesion by:

- Cross-cut method

PN-EN ISO 2409:2013-06

- Pull-off method

PN-EN ISO 4624:2004

ISO 4624:2016

- Shot peening, bending, reel in, scratch,

thermal shocks methods

BOSMAL/I-7-63/03

Coating thickness

Range: (0 to 1000) µm

Magnetic method

PN-EN ISO 2178:2016-06

PN-EN ISO 2361:1998

PN-EN ISO 2808:2008, met. 7C

Coating thickness

Range: (10 to 1000) μm

Eddy-current method

PN-EN ISO 2808:2008, met. 7D

Microscopic method

PN-EN ISO 1463:2006

PN-EN ISO 2808:2008, met. 6A

Resistance to liquids

PN-EN ISO 2812-1:2018-01

Flexibility

Bend test on mandrel method

PN-EN ISO 1519:2012

Hardness

Pencil method

PN-EN ISO 15184:2013-04

Tested object / product	Type of activity/tested characteristics/test methods	Reference documents
Galvanic coatings and paint coatings on metal and plastic (metal products and plastic products)	Impact (deformation) resistance Falling weight method	PN-EN ISO 6272-1:2011
	Abrasion resistance Free falling abrasion material method	PN-C-81516:1976 p. 2.2 (method A)
	Taber method	ISO 15082:2016 PN-EN ISO 7784-2:2016-05
	Resistance to variable temperature	PN-EN 60068-2-14:2009 Test Na
Metal products	HBW hardness Range: 70 to 200 HBW1/10 70 to 200 HBW2.5/62.5 100 to 450 HBW2.5/187.5 100 to 200 HBW5/250 100 to 450 HBW5/750 100 to 450 HBW10/3000 Brinell method	PN-EN ISO 6506-1:2014-12
	Rockwell hardness Range: 50 to 88 HRA 20 to 100 HRB 20 to 70 HRC Rockwell method	PN-EN ISO 6508-1:2016-10
	HV hardness Range: 100 to 750 HV5 100 to 750 HV10 100 to 750 HV30 Vickers method	PN-EN ISO 6507-1:2018-05
	HV microhardness Range: 250 to 1000HV0.05 100 to 1000 HV0.1 100 to 1000HV0.3 50 to 1000HV0.5 50 to 1000HV1 Vickers method	PN-EN ISO 6507-1:2018-05
	Absorbed energy: KV₂and KU₂. Range: Initial energy of the pendulum hammer: 300 J Test temperature: - 23 ±5^oC - reduced to -40^oC Charpy pendulum impact test	PN-EN ISO 148-1:2017-02
	Mechanical properties: - yield strength, R_e - proof strength, plastic extension, R_p - tensile strength, R_m - ultimate elongation, A - reduction of area at fracture, Z Range: up to 150 kN Tensile test at room temperature	PN-EN ISO 6892-1:2016-09, met. A & B
	Grain size Reference patterns method Secant method Grain counting method Optical microscopy method	PN-EN ISO 643:2013-06 ASTM E112-13

Tested object / product	Type of activity/tested characteristics/test methods	Reference documents
Metal products	Microstructure: Range: Microstructure of raw materials, cast materials, annealed materials, after heat treatment, after thermochemical treatment, after plastic forming Optical microscopy method	BOSMAL/I-7-44/05 PN-EN ISO 945-1:2018-04 PN-H-04661:1975 PN-H-04505:1966 ASTM A247-19
Metal products	Macrostructure: - surface defects, - internal defects Visual assessment method Optical microscopy method	BOSMAL/I-7-45/05
Metal tube (in full section) (f_max= 50 mm)	Formability Flattening method	PN-EN ISO 8492:2014-02
Metal tube (in full section) (f_max= 50 mm)	Formability Drift-expanding method	PN EN ISO 8493:2005
Fasteners: bolts, nuts (M5 up to M22), screws, washers	Surface discontinuities Visual assessment method	PN-EN ISO 6157-2:2006 PN-EN 26157-1:1998
	Thread discontinuities Visual assessment method Optical microscopy method	PN-EN 26157-3:1998
	Mechanical properties Tensile method	PN-EN ISO 898-1:2013-06, w/o p.9.13 PN-EN ISO 898-5:2012 w/o p.9.4 PN-EN 28839:1999 PN-EN ISO 6157-2:2006 PN-EN ISO 898-2:2012 PN-EN ISO 898-2:2012/Ap1:2016-05 PN-EN ISO 2320:2016-02, w/o p.9.3
Products made of ferromagnetic materials	Materials surface discontinuities Magnetic-particle method (MT)	BOSMAL/I-7-08/08
Sintered metal products	Apparent hardness	PN-EN ISO 4498:2010
	Range: 70 to 200 HBW1/10 70 to 200 HBW2.5/62.5 100 to 450 HBW2.5/187.5 100 to 200 HBW5/250 100 to 450 HBW5/750 100 to 450 HBW10/3000 Brinell method	PN-EN ISO 6506-1:2014-12
	Range: 50 to 88 HRA 20 to 100 HRB 20 to 70 HRC Rockwell method	PN-EN ISO 6508-1:2016-10
	Range: 100 to 750 HV5 100 to 750 HV10 100 to 750 HV30 Vickers method	PN-EN ISO 6507-1:2018-05
	Radial crushing strength Compression method	PN-EN ISO 2739:2012
	Density Gravimetric method	PN-EN ISO 2738:2001 p. 9.1
	Oil content Gravimetric method	PN-EN ISO 2738:2001 p. 9.2
	Open porosity Gravimetric method	PN-EN ISO 2738:2001 p. 9.3

Tested object / product	Type of activity/tested characteristics/test methods	Reference documents
Iron alloys products	Inclusion content in steel Method A Optical microscopy	PN-H-04510:1964 ASTM E45-18a
	Depth of decarburization Metallographic method Hardness profile method	PN-EN ISO 3887:2018-03
	Effective depth of hardened layer after surface heat treatment Hardness profile method	PN-ISO 3754:1999
	Effective depth of carburized and hardened layer Hardness profile method	PN-EN ISO 2639:2005
	Carbon and sulfur content Range: C (0.01 to 4.5) % S (0.005 to 0.6) % High temperature combustion and IR detection method	PN-EN ISO 15350:2010
	Nitrogen content Range: (0.005 to 0.5) % Thermal conductivity method	PN-EN ISO 10720:2009
	Content of: Mn, Si, P, Cr, Ni, Mo, Co, Al, Cu, Pb, Ti, Nb, V, Sn Range: Mn (0.002 to 4.0) % Si (0.030 to 3.5) % P (0.010 to 1.0) % Cr (0.002 to 25.0) % Ni (0.002 to 12.0) % Mo (0.010 to 10,0) % Co (0.005 to 10.0) % Al (0.0050 to 10.0) % Cu (0.0050 to 6.0) % Pb (0.10 to 0.5) % Ti (0.010 to 1.5) % Nb (0.010 to 2.0) % V (0.010 to 2.0) % Sn (0.010 to 0.40) % Inductively coupled plasma optical emission spectrometry (ICP-OES) method	BOSMAL/I-7-43/06

Tested object / product	Type of activity/tested characteristics/test methods	Reference documents
Iron alloys products	Content of: Mn, Si, P, Cr, Ni, Cu, W, V, Al, Ti, Mo, Nb, Co, Sn Range: Mn (0.020 to 12.0) % Si (0.10 to 4.0) % P (0.020 to 1.0) % Cr (0.020 to 26.0) % Ni (0.010 to 22.0) % Cu (0.020 to 4.1) % W (0.020 to 18.0) % V (0.020 to 4.0) % Al (0.010 to 1.5) % Ti (0.005 to 1.5) % Mo (0.010 to 5.0) % Nb (0.010 to 2.5) % Co (0.20 to 12.5) % Sn (0.010 to 0.40) % Wavelength dispersive X-ray fluorescence spectrometry (WD-XRF) method	BOSMAL/I-7-90/02
Copper products	Content of: Sn, Pb, Fe, Mn, Si, Al, Ni, P, Zn Range: Sn (0.005 to 10) % Pb (0.005 to 12) % Fe (0.010 to 6.5) % Mn (0.010 to 6) % Si (0.030 to 5) % Al (0.005 to 6) % Ni (0.010 to 10) % P (0.010 to 0.5) % Zn (0.030 to10) % Inductively coupled plasma optical emission spectrometry (ICP-OES) method	BOSMAL/I-7-43/06
	Phosphorous content Range: (0.005 to 1.3) % Spectrophotometric method	PN-H-04740-11:1981 p.1 PN-H-04745-05:1981 p.1
	Average grain size Comparison method	PN-EN ISO 2624:1997
Aluminum and its alloys products	Content of: Si, Mg, Mn, Cu, Ni, Fe, Sn, Zn, Pb, Cr, Ti Range: Si (0.030 to 15) % Mg (0.010 to 12) % Mn (0.010 to 2.5) % Cu (0.005 to 6) % Ni (0.010 to 2.5) % Fe (0.20 to 2) % Sn (0.005 to 0.5) % Zn (0.010 to 5) % Pb (0.005 to 2.5) % Cr (0.005 to 0.6) % Ti (0.010 to 0.5) % Inductively coupled plasma optical emission spectrometry (ICP-OES) method	BOSMAL/I-7-43/06

Tested object / product	Type of activity/tested characteristics/test methods	Reference documents
Aluminum and its alloys products	Content of: Fe, Si, Cu, Zn, Mg, Mn, Ni, Pb, Sn, Cr, Ti, Zr Range: Fe (0.10 to 1.0) % Si (0.10 to 1.5) % Cu (0.010 to 5.0) % Zn (0.020 to 5.0) % Mg (0.010 to 2.0) % Mn (0.010 to 1.5) % Ni (0.010 to 1.5) % Pb (0.010 to 0.50) % Sn (0.010 to 0.20) % Cr (0.010 to 0.30) % Ti (0.010 to 0.25) % Zr (0.010 to 0.20) % Wavelength dispersive X-ray fluorescence spectrometry (WD-XRF) method	BOSMAL/I-7-90/02
Zinc and its alloys products	Content of: Al, Cu, Fe, Mg, Pb, Sn, Range: Al (0.10 to 10.0) % Cu (0.050 to 4.0) % Fe (0.010 to 1.0) % Mg (0.010 to 1.0) % Pb (0.001 to 0.1) % Sn (0.001 to 0.1) % Inductively coupled plasma optical emission spectrometry (ICP-OES) method	BOSMAL/I-7-43/06
Automobile catalytic converter systems	Content of: Rh, Pd, Pt Range: Rh (0,001 – 0,10) % Pd (0,01 – 0,50) % Pt (0,01 – 0,50) % Wavelength dispersive X-ray fluorescence spectrometry (WD-XRF) method	BOSMAL/I-7-90/02
Automobile catalytic converter systems	Content Rh, Pd, Pt Range: Rh (0,001 – 1,0) % Pd (0,001 – 1,0) % Pt (0,001 – 1,0) % Inductively coupled plasma optical emission spectrometry (ICP-OES) method	BOSMAL/I-7-43/06

Tested object / product	Type of activity/tested characteristics/test methods	Reference documents
Car parts, parts / units of machines and devices, electric and electronic products, construction products, plastic and rubber products	Determination of cleanliness Range: (0,0003 – 10) g Gravimetric method	DIN 8964-1:1996-03 BOSMAL/I-7-48/04 VDA 19.1:2015 (w/o 8.3 i 8.4) ISO 16232:2018 (w/o 7.4.5, 7.4.6, 7.4.7, 7.5) ISO 16232-3:2007 ISO 16232-4:2007 ISO 16232-6:2007 ISO 16232-10:2007
	Determination of cleanliness Range: Length (5 – 2500) μm Width (5 – 2500) μm Optical microscopy method	DIN 8964-1:1996-03 BOSMAL/I-7-48/04 VDA 19.1:2015 (w/o 8.3 i 8.4) ISO 16232:2018 (w/o 7.4.5, 7.4.6, 7.4.7, 7.5) ISO 16232-3:2007 ISO 16232-4:2007 ISO 16232-7:2007 ISO 16232-10:2007
Operating and industrial oils	Identification Infrared spectrometric method (FTIR)	BOSMAL/I-7-41/05
	Kinematic viscosity at 40ºC Range: (2 to 200) mm²/s Capillary method Dynamic viscosity (calculated)	PN-EN ISO 3104:2004
	Kinematic viscosity at 100ºC Range: (2 to 25) mm²/s Capillary method Dynamic viscosity (calculated)	PN-EN ISO 3104:2004
	Acid number Range: (0.1 to 5.0) mg KOH/g Potentiometric titration	PN-C-04049:1988 ASTM D 664-17
	Alkali number Range: (1.0 to 15.0) mg KOH/g Potentiometric titration	PN-C-04049:1988 ASTM D 4739-17
	Fuel content Range: (0.5 to 12) % (m/m) Chromatographic method	BOSMAL/I-7-86/01 ASTM D3524-14
Greases	Dropping point Range: (130 to 300) ºC Visual method	PN-ISO 2176:2011
Greases	Cone penetration Range: (< 400)	PN ISO 2137:2011

Tested object / product	Type of activity/tested characteristics/test methods	Reference documents


Engine fuels	Benzene content Range: (0.1 to 20) % (V/V) Infrared spectrometric method (FTIR)	PN-EN 238:2000 PN-EN 238:2000/A1:2008
	Determination of distillation characteristic at atmospheric pressure Range: (< 400) ºC Distillation method	PN-EN ISO 3405:2012
	Gum content (unwashed and washed) Range: (0.5 to 30) mg/100 ml Gravimetric method	PN-EN ISO 6246:2017-05
	Corrosiveness to copper Visual method	PN-EN ISO 2160:2004
	Density Range: (0.700 to 0.950) g/cm³Oscillating U-tube method	PN-EN ISO 12185:2002
	Flash point Range: < 200ºC Pensky-Martens closed cup method	PN-EN ISO 2719:2016-08 met. A
Brake fluids	Colour Visual method	PN-C-40005:2002 p. 5.2
	Boiling point Range: <300ºC Distillation method	PN-C-40005:2002 p. 5.3
	pH value Range: 3 to 12 Potentiometric method	PN-C-40005:2002 p. 5.6
	Thermal stability Distillation method	PN-C-40005:2002 p. 5.7.3
	Vaporization Gravimetric method	PN-C-40005:2002 p.5.10
Refrigerating liquids	Ash residue Gravimetric method	PN-C-40008-02:1992
	Boiling point Range: <300ºC Distillation method	PN-C-40008-03:1992
	pH value Range: 3 to 12 Potentiometric method	PN-C-40008-04:1992
	Alkali reserve Titration method	PN-C-40008-05:1993

Car Assemblies Testing Department (BS) Sarni Stok 93, 43-300 Bielsko-Biała
Tested object / product	Type of activity/tested characteristics/test methods	Reference documents
Machinery parts, assemblies and components	Forces: rip, pull out, push in, open and close, switch on and off, operating, (10 N to 100 kN)	BOSMAL/I-7-25/06
Machinery parts, assemblies and components	Resistance to changeable mechanical load Range: - force ± 100 kN - linear displacement (0 to 250 mm) - force moment (± 6000 Nm) - angle (0 to 90°)	BOSMAL/I-7-74/01
Machinery parts, assemblies and components and another construction components	Dependences between load: force, force moment and deformation such as: displacement, elongation, deflection, angle of rotation Range: - force ± 100 kN - force moment ± 5 650 Nm - linear displacement (0 to 250) mm - angle of rotation (0 to 90°) Method: direct or indirect measurement	BOSMAL/I-7-100/01
Mechanical coupling components of combinations of vehicles	Resistance to dynamic load Static strength Testing on the test rig	UN ECE Regulation No. 55 Series 01, Annex 6
Towing devices	Resistance to static load. Testing on the test rig	Commission Regulation (EU) No. 1005/2010, Annex 2
Automotive vehicles of categories M and N	External noise emitted by moving and standing vehicle by acoustic pressure level method Range (25 to 140) dB Direct method	UN ECE Regulation No. 51 Series 02 Annex 3 p. 3.1; 3.2, Annex 8 p. 3.1 PN-ISO 362:2003 PN-ISO 7188:2003
Shock absorbers	Damping forces by direct method during simulated operation Range: up 25 kN	BOSMAL/I-7-51/03
Master cylinders of hydraulic braking systems of automotive vehicles and trailers	Hydraulic tightness by quantitative, qualitative, and quantitative-qualitative methods Range: up to 110 MPa	BOSMAL/I-7-18/05
	Simulated operation	BOSMAL/I-7-26/03
	Resistance to multiple repeatable pressure cycles by simulated operation method	BOSMAL/I-7-23/06
Automotive vehicles and trailers brake pipes junctions	Hydraulic tightness by quantitative, qualitative, and quantitative-qualitative methods Range: up to 110 MPa	BOSMAL/I-7-18/05
Automotive vehicles and trailers braking cylinders	Hydraulic tightness by quantitative, qualitative, and quantitative-qualitative methods Range: up to 110 MPa	BOSMAL/I-7-18/05
Automotive vehicles and trailers braking cylinders	Resistance to multiple repeatable pressure cycles by simulated operation method	BOSMAL/I-7-23/06

Tested object / product	Type of activity/tested characteristics/test methods	Reference documents
Automotive vehicles and trailers braking calipers	Hydraulic tightness by quantitative, qualitative, and quantitative-qualitative methods Range: up to 110 MPa	BOSMAL/I-7-18/05
Automotive vehicles and trailers braking calipers	Resistance to multiple repeatable pressure cycles by simulated operation method	BOSMAL/I-7-23/06
Hydraulic braking systems metal pipes of automotive vehicles	Hydraulic tightness by quantitative, qualitative and quantitative-qualitative methods Range: up to 110 MPa	BOSMAL/I-7-18/05
Pipes with upended ends, tapped holes, nipples and flexible pipes’ ends	Minimal burst pressure by direct method Range: up to 110 MPa	BOSMAL/I-7-19/04
Other products subjected to hydraulic pressure	Hydraulic tightness by qualitative or quantitative method Range: up to 110 MPa Direct method	BOSMAL/I-7-18/05
	Minimum burst pressure by direct measurement Range: up to 110 MPa Direct method	BOSMAL/I-7-19/04
	Resistance to multiple repeatable pressure cycles by simulated operation method Range: (0 to 250) bar Direct method	BOSMAL/I-7-23/06
Car gearboxes	Gears and bearings durability by simulated operation method	BOSMAL/I-7-17/03
Parts, assemblies and components of driveline of heavy-duty vehicles	Efficiency Testing on the test rig	Commission Regulation(EU) No. 2017/2400 Annex VI p.3
Brake discs, brake drums and brake linings of disc and drum brakes in M1 and N1-category vehicles	Friction properties Wearing Durability Load resistance Temperature resistance Dynamic friction Brake testing method under real conditions on a dynamometer with reduced inertia moment to one wheel	UNECE Regulation No. 90 Series 02 Annex 3, Annex 4, Annex 9, Annex 11 BOSMAL/I-7-91/01 BOSMAL/I-7-93/01 BOSMAL/I-7-94/01 UNECE Regulation No. 13 Series 11 Annex 4, Annex 11, Annex 15, Annex 19 BOSMAL/I-7-96/01 BOSMAL/I-7-97/01 UNECE Regulation No. 13H Series 01 Annex 3, Annex 7 BOSMAL/I-7-98/01 BOSMAL/I-7-99/01

Tested object / product	Type of activity/tested characteristics/test methods	Reference documents
Brake discs, brake drums and brake linings of disc and drum brakes in L1, L2, L3, L4 and L5-category vehicles	Friction properties Wearing Durability Load resistance Temperature resistance Dynamic friction Brake testing method under real conditions on a dynamometer with inertia moment reduced to one wheel	UNECE Regulation No. 78 Series 04
Brake discs, brake drums and brake linings of disc and drum brakes including brake callipers in M1 and N1-category vehicles, as well as L1,L2, L3, L4 and L5-category vehicles	Friction properties Friction coefficient Performance indicators	ISO 11157:2005 ISO 15484:2008 ISO 26867:2009 JASO C406:2000 SAE J2784:2009-09 SAE J2522:2014-09 JASO C436:1999 JASO C442:1977 JASO C443:2009
	Wearing	SAE J2707:2012-10 JASO C456:1984 JASO C427:2009
	Wearing caused by temperature	SAE J2707:2012-10
	Durability	JASO 0419:2006
	Temperature resistance	SAE J2928:2018-05
	Noise emitted by brake	SAE J2521:2013-04
Brake callipers in M1 and N1-category vehicles, as well as L1, L2, L3, L4 and L5-category vehicles	Resistance to pressure, temperature and braking moment	JASO C459:2010
Electric drives	Noise level in acoustic chamber (global, third-octave and octave levels) by direct measurement in general, in one-third octave bands or octave bands	BOSMAL/I-7-42/03

Engine Research Department (BH)

Sarni Stok 93, 43-300 Bielsko-Biała

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Combustion engines

(max. power up to 500 kW)

Performance measurement on the engine test bench

UN ECE Regulation No. 85 Series 00

Directive 80/1269/EEC, with amendments and corrections up to Directive 1999/99/EC

Smoke measurement
Range: (0 to 60)%

Opacity method

UN ECE Regulation No. 24 Series 03

Directive 72/306/EEC with amendments and corrections up to Directive 2005/21/EC

Operating parameters:

- torque (0 to 3000) Nm;

tensometric method

- engine power (0 to 500) kW;

Calculated

- rotational speed (0 to 10 000) rpm;

impulse method

- fuel consumption (0 to 150) kg/h;

gravimetric method

- air consumption (0 to 2 400) kg/h;

thermoanemometric method

Concentration: CO, CO₂, N₂O, NO₂, NO_x, THC, CH₄, NMHC, NH₃

CO: range: (0 to 10)%;

method: NDIR

CO₂: range: (0 to 20)%;

method: NDIR

N₂O: range: (0 to 0.001)%;

method: CLD

NO₂: range: (0 to 0.01)%;

method: CLD

NO_x: range: (0 to 0.01)%;

method: CLD

THC: range: (0 to 0.02)%;

method: FID

CH₄: range: (0 to 0.02)%;

method: FID

NMHC: range: (0 to 0.02)%;

method: FID

NH₃: range: (0 to 0.001)%;

method: LDD

PM - Particulate mass

gravimetric method

PN - particulate number

laser method

UN ECE Regulation No. 49 Series 06

Regulation (EU) 2016/1628 as amended up to Regulation (EU) 2017/654

US EPA Regulations, Code of Federal Regulation (CFR) Title 40 – Protection of Environment, Part 1039, 1042, 1065, 1068.

UN IMO Standards Tier I, II, III; Annex VI 2008, Edition 2017

Directive 94/25/EC, as amended by Directive 2003/44/EC,

Regulation (EU) 1025/2012 and Directive 2013/53/EU

Swiss Federal Ordinance on Air Pollution Control (OAPC) Appendix 4, Section 31, paragraph 1 and 2; Section 32,

paragraph 2 SN 277206:2014-06

UN ECE Regulation No. 96 Series 04

UN ECE Regulation No. 120 Series 02

UN ECE Regulation No. 132 Series 01

UN ECE Regulation No. 143 Series 00

Various tests on the engine test bench

BOSMAL/I-7-46/03

Electric drivetrains

(max. power up to 500 kW)

Net power and the maximum power after 30 minutes

on the engine test bench

UN ECE Regulation No. 85 Series 00

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Replacement silencing systems of M1 and N1 motor vehicles

Silencing system back pressure measurement

UN ECE Regulation No. 59 Series 02

Vehicles of categories M and N with Sl and CI engines, including hybrid vehicles

Emission of gaseous and particulate matter exhaust pollutants – ambient temperatures from 14°C to 30°C

(Type I Test)

Concentration: CO, CO_2, NO₂, NO_x, THC, CH₄, PM, PN:

Range:

- CO: (0 to 12)% ;

- CO₂: (0 to 20)%

Method: NDIR

- NO₂, NO_x: (0 to 1)%

Method: CLD;

- THC: (0 to 5)%

Method: FID;

- CH₄: (0 to 0.05)%

Method: chromatographic GC-FID;

- CH₄: (0 to 2.5)%

Method: FID;

- O₂: (0 to 22)%,

Method: PMD

- PM – gravimetric method;

- PN – laser method.

Emission: CO, CO₂, NO₂, NO_x, THC, CH₄, NMHC, PM, PN (calculated)

UN ECE Regulation No. 83 Series 07

Regulation (EC) 715/2007 as amended up to Regulation (EU) 459/2012

Regulation (EC) 692/2008 as amended up to Regulation (EU) 2018/1832

Directive 70/220/EEC, as amended

up to Directive 2003/76/EC

UN Global Technical Regulation (GTR) No. 15

Regulation (EU) 2017/1151 as amended up to Regulation (EU) 2018/1832

Emission of gaseous pollutants in real driving conditions

Measurement of concentration with PEMS mobile analyzers:

CO - method: NDIR;

Range (0 to 10)%

CO₂ - method: NDIR;

Range (0 to 20)%

THC - method: FID;

Range (0 to 10000) ppmC₃

NO - method: CLD, NDUV;

Range (0 to 5000) ppm

NO₂ - method: NDUV;

Range (0 to 2500) ppm

NO_x – method CLD;

Range (0 to 3000) ppm

PN - laser method, electrostatic method Emission: CO, CO₂, THC, NO, NO₂, NO_x, PN

Regulation (EC) 692/2008 as amended up to Reg. (EU) 2018/1832

Regulation (EU) 2017/1151 as amended up to Reg. (EU) 2018/1832

Carbon monoxide emission at idling

(Type II Test)

Emission measurement:

- CO – infrared method;

Range: (0 to 10)%

- CO₂ – infrared method;

Range: (0 to 20)%

- THC – infrared method;

Range: (0 to 2)%

- O₂ – chemical method;

Range: (0 to 25)%

UN ECE Regulation No. 83 Series 07

Regulation (EC) 715/2007 as amended up to Reg. (EU) 459/2012

Regulation (EC) 692/2008 as amended

up to Reg. (EU) 2018/1832

Directive 70/220/EEC as amended

up to Directive 2003/76/EC

Regulation (EU) 2017/1151 as amended up to Reg. (EU) 2018/1832

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Vehicles of categories M and N with Sl and CI engines, including hybrid vehicles

Emission of crankcase gases by crankcase underpressure method

(Type III Test)

Range: 1 m H₂O

- manometric method

UN ECE Regulation No. 83 Series 07

Regulation (EC) 715/2007 as amended up to Reg. (EU) 459/2012

Regulation (EC) 692/2008 as amended up to Reg. (EU) 2018/1832

Directive 70/220/EEC, as amended up to Directive 2003/76/EC

Regulation (UE) 2017/1151 as amended up to Reg. (EU) 2018/1832

Durability of anti-pollution devices by using driving tests emission measurement method, before and after vehicle ageing
(Type V Test)

Emissions of CO and HC gaseous pollutants at ambient temp. -7°C

(Type VI Test)

Measurement of concentrations:

- CO – NDIR method;

Range: (0 to 12)%

- THC – FID method;

Range: (0 to 5)%

Emission calculated

On-board diagnostic (OBD) operation test

Heavy-duty vehicles of categories M and N with Sl and CI engines, including hybrid vehicles

Emission of gaseous pollutants in real driving conditions

Measurement of concentration with PEMS mobile analyzers:

CO - method: NDIR;

Range (0 to 10)%

CO₂ - method: NDIR;

Range (0 to 20)%

THC - method: FID;

Range (0 to 10000) ppmC₃

NO - method: CLD, NDUV;

Range (0 to 5000) ppm

NO₂ - method: NDUV;

Range (0 to 2500) ppm

NO_x – method CLD;

Range (0 to 3000) ppm

Emission: CO, CO₂, THC, NO, NO₂, NO_x

Regulation (EC) 595/2009 as amended up to Regulation (EU) 133/2014

Regulation (EU) 582/2011 as amended up to Regulation (EU) 2017/2400 and Regulation (EU) 2018/932

Regulation (EU) 2017/2400 as amended

up to Regulation (EU) 2019/318

Non-road mobile machinery with Sl and CI engines

Regulation (EU) 2016/1628 as amended up to Regulation (EU) 2017/654, Regulation (EU) 2017/655 and Regulation (EU) 2018/987

Regulation (EU) 2018/985

Vehicles of categories M and N with Sl and CI engines, including hybrid and electric vehicles

Fuel consumption by the carbon balance method

UN ECE Regulation No. 101 Series 01

Regulation (EC) 715/2007 as amended up to Reg. (EU) 459/2012

Regulation (EC) 692/2008 as amended up to Reg. (EU) 2018/1832

Directive 80/1268/EEC as amended up to Directive 2004/3/EC

UN Global Technical Regulation (GTR) No. 15

Regulation (EU) 2017/1151 as amended up to Reg. (EU) 2018/1832

Tested object / product	Type of activity/tested characteristics/test methods	Reference documents
Vehicles of categories M and N with Sl and CI engines, including hybrid and electric vehicles	Electrical energy consumption by energy balance method Driving range on electrical battery power Current: range (0 to 500) A Voltage: range (0 to 1500) V	UN ECE Regulation No. 101 Series 01 Regulation (EU) 2017/1151 as amended up to Regulation (EU) 2018/1832
Vehicles with SI and CI engines	Emission of gaseous pollutants at idling and at idling-up speed by direct measurement of row exhaust gases Measurement of concentrations: - CO – infrared method ; Range: (0 to 10)% - CO₂ – infrared method Range: (0 to 20)% - THC – infrared method; Range: (0 to 2)% - O₂ – chemical method Range: (0 to 25)%	MI Decree from 31.12.2002 (D.U. No. 32, p. 262 from 2003) § 9.1 p. 2 and 3 Att. 2, as amended up to MT Decree from 09.01.2013 p.30 Directive 2009/40/EC, as amended up to Directive 2010/48/EU UN ECE Regulation No. 24 Series 03 Regulation (EC) 715/2007 as amended, up to Regulation (EU) 459/2012 Regulation (EC) 692/2008 as amended up to Regulation (EU) 2018/1832 Regulation (EU) 2017/1151 as amended up to Regulation (EU) 2018/1832
Vehicles with SI and CI engines	Smoke Range: (0 to 60)% Opacity method
Catalysts for spare parts for M and N-category vehicles with SI and CI engines	Catalyst system efficiency by comparative measurement of emission of gaseous and particulate pollutants	UN ECE Regulation No. 103 Series 00 Regulation (EC) 715/2007 as amended up to Regulation (EU) 459/2012 Regulation (EC) 692/2008 (18.07.2008) as amended up to Regulation (EU) 2018/1832 Regulation (EU) 2017/1151 as amended up to Regulation (EU) 2018/1832
M and N-category vehicles equipped with additional LPG or CNG fueling retrofit	Gaseous exhaust emission Concentration: CO, CO₂, NO₂, NO_x, THC, CH₄. Range: - CO: (0 to 12)% ; - CO₂: (0 to 20)% NDIR method; - NO₂, NO_x: (0 to 1)% CLD method; - THC: (0 to 5)% FID method; - CH₄: (0 to 0.05)% chromatographic method - GC-FID; - CH₄: (0 to 2.5)% FID method; - O₂: (0 to 22)%, PMD method Emission: CO, CO₂, NO₂, NO_x, THC, CH₄, NMHC (calculated)	UN ECE Regulation No. 115 Series 00
	Fuel consumption by the carbon balance method
	Maximum power on wheels Range: (0 to 258) kW Tensometric method
	On-board diagnostic (OBD) operation test

Tested object / product	Type of activity/tested characteristics/test methods	Reference documents
M and N-category vehicles with SI and CI engines	Emission of gaseous and particulate exhaust pollutants - JC08 tests Concentration: CO, CO₂, NO₂, NO_x, THC, CH₄, PM,PN: Range: - CO: (0 to 12)% ; - CO₂: (0 to 20)% NDIR method; - NO₂, NO_x: (0 to 1)% CLD method; - THC: (0 to 5) % FID method; - CH₄: (0 to 0.05)% chromatographic method GC-FID; - CH₄: (0 to 2.5)% FID method; - O₂: (0 to 22)%, PMD method; - PM – gravimetric method; - PN – laser method. Emission: CO, CO₂, NO₂, NO_x, THC, CH₄, NMHC, PM, PN (calculated)	TRIAS 31-J042(2)-02 TRIAS 31-J042(3)-02 Attachment 42 -Technical Standard .
	Emission of CO, HC, and CO₂at idling
	Underpressure in the crankcase by direct measurement
	Fuel consumption by JC08 tests	TRIAS 99-006-01
Two-wheel or three-wheel and four-wheel motor vehicles, including hybrid and electric vehicles	Emission of gaseous and particulate exhaust pollutants (Type I Test) Concentration: CO, CO_2, NO₂, NO_x, THC, CH₄, PM, PN: Range: - CO: (0 to 12)%; - CO₂: (0 to 20)% Method: NDIR -NO₂, NO_x: (0 to 1)% Method: CLD; - THC: (0 to 5)% Method: FID; - CH₄: (0 to 0.05)% Chromatographic method GC-FID; - CH₄: (0 to 2.5)% Method: FID; - O₂: (0 to 22)%, Method: PMD - PM - gravimetric method; - PN - laser method. Emission: CO, CO₂, NO₂, NO_x, THC, CH₄, NMHC, PM (calculated)	Regulation (EU) 168/2013 Regulation (EU) 134/2014 as amended up to Regulation (EU) 2018/295 UN Global Technical Regulations (GTR) No. 2

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Two-wheel or three-wheel and four-wheel motor vehicles, including hybrid and electric vehicles

Test of carbon monoxide at idling

(Type II Test)

Emission measurements:

- CO - infrared method;

Range: (0 to 10)%

- CO₂ - infrared method;

Range: (0 to 20)%

- THC - infrared method;

Range: (0 to 2)%

- O₂ - chemical method;

Range: (0 to 25)%

Regulation (EU) No. 168/2013

Regulation (EU) No. 134/2014 as amended up to Regulation (EU) 2018/295

UN Global Technical Regulations (GTR) No. 2

Emission of crankcase gases
by crankcase underpressure measurement
(Type III Test)

Range: 1 m H₂O

- manometer method

Emission of CO₂, fuel consumption, consumption of electrical power and driving range when battery-powered by carbon balance and energy balance methods

Type VII Test

Maximum power on wheels

Tensometric method

Range: (0 to 258) kW

Heat Exchangers Testing Department (BW) Sarni Stok 93, 43-300 Bielsko-Biała
Tested objects / groups of objects	Type of activity/tested characteristics/test methods	Reference documents
Car heat exchangers and other elements of heat exchange systems	Resistance to working medium temperature changes	BOSMAL/I-7-53/02
	Resistance to working medium changeable pressure	BOSMAL/l-7-54/02

Automotive Electrotechnics & Electronics Testing Laboratory(BE) Sarni Stok 93, 43-300 Bielsko-Biała
Tested object / product	Type of activity/tested characteristics/test methods	Reference documents
Components/assemblies of electric and electronic equipment	Voltage (100 x 10^-6 V to 1000 V)	BOSMAL/I-7-10/05
	Electric current (200 x 10^-6 A to 300 A)	BOSMAL/I-7-37/05
	Resistance (50 x 10^-6Wto 100 x 10¹²W)	ISO 6722-1:2011 ISO 6722-1:2011/Cor1:2012 PN-EN 60851-5:2008
	Capacitance (1 pF to100 μF)	BOSMAL/I-7-39/04
	Inductance (100 μH to100 H)	BOSMAL/I-7-39/04
Components/assemblies of machinery and other devices	Environmental hazard resistance: Test A: Cold (up to -40±2°C)	PN-EN 60068-2-1:2009
	Test B: Dry heat (up to 300±2°C)	PN-EN 60068-2-2:2009
	Test Cab: Damp heat, steady state (30±2°C; 93±3%) (30±2°C; 85±3%) (40±2°C; 93±3%) (40±2°C; 85±3%)	PN-EN 60068-2-78:2013-11
	Test Db: Damp heat, cyclic (12h+12h cycle)	PN-EN 60068-2-30:2008
	Test Na: Change of temperature (-40±2°C to 150±2°C)	PN-EN 60068-2-14:2009
	Test Nb: Change of temperature (-40±2°C to 130±2°C) with gradient ≤ 10°C/min	PN-EN 60068-2-14:2009
	Test Z/AD: Composite temperature/humidity cyclic test	PN-EN 60068-2-38:2010
	Test Fc: Vibration (sinusoidal) Range: up to 100 g (peak)	PN-EN 60068-2-6:2008
	Test Ea: Shock Range: up to 150 g (peak)	PN-EN 60068-2-27:2009
	Test Fh: Vibrations, broadband random Range: up to 70 g (RMS)	PN-EN 60068-2-64:2008
	Water resistance (tests concerning second characteristic digit 1, 2, 3, 4, 4K, 5, 6, 6K, 7, 8, 9, 9K) Test Rb 1.1 by oscillatory pipe method (max. 40 l/min) Test Rb 2, Rb 3 and Rc 1	PN-EN 60529:2003 p. 14.2.1, 14.2.2, 14.2.3; 14.2.4, 14.2.5, 14.2.6, 14.2.7, 14.2.8 PN-EN 60529:2003/A2:2014-07 PN-EN 60068-2-18:2017-08 ISO 20653:2013
	Dust penetration resistance (dust tests concerning first characteristic digit 5, 5K, 6, 6K) in dust chamber with negative pressure and dust circulation being forced	PN-EN 60529:2003 p. 13.4 PN-EN 60529:2003/A2:2014-07 ISO 20653:2013
	Degrees of protection against foreign objects (tests concerning first characteristic digit 1, 2, 3, 4 and additional letters A, B, C, D)	PN-EN 60529:2003 PN-EN 60529:2003/A2:2014-07 ISO 20653:2013
	Degrees of protection against access to hazardous parts (tests concerning first characteristic digit 1, 2, 3, 4 and additional letters A, B, C, D)	PN-EN 60529:2003 PN-EN 60529:2003/A2:2014-07 ISO 20653:2013
	Splash water test	ISO 16750-4:2010

Tested object / product	Type of activity/tested characteristics/test methods	Reference documents
Luminous devices powered by constant or alternating voltage	Luminous intensity distribution by goniophotometric method with rotating object (0.1 to 5 x 10⁶) cd	BOSMAL/I-7-84/02 PN-EN 13032-1+A1:2012 PN-EN 13032-4:2015-09 CIE 70:1987 IES LM 79-08:2008 PN-EN 12966:2015-03 PN-EN 12966+A1:2019-02
	Spectral and colorimetric characteristics (spectral distribution, chromaticity coordinates, correlated colour temperature)	CIE 13.3:1995 CIE 15:2004 CIE 15:2018 CIE 63:1984 IES LM 79-08:2008 PN-EN 13032-4:2015-09 PN-EN 12966:2015-03 PN-EN 12966+A1:2019-02
	Luminance (1 x 10^-8to 3 x 10⁵) cd/m²	PN-E-04040-04:1983 PN-EN 13032-1+A1:2012 PN-EN 13032-4:2015-09 SAE J1757-1:2015-05 PN-EN 12966:2015-03 PN-EN 12966+A1:2019-02 PN-EN 12966-1:2009 PN-EN ISO 9241-305:2009
	Luminous flux	CIE 84:1989 PN-EN 13032-1+A1:2012 PN-EN 13032-4:2015-09 IES LM 79-08:2008
Traffic control equipment Signal heads	Luminance uniformity	PN-EN 12368:2015-07 p. 8.3
Workplaces, passageways	Illuminance (1 x 10^-3 to 3 x 10⁵) lx	PN-E-04040-03:1983 PN-EN 12464-1:2012 PN-EN 12464-2:2014-05
Components/assemblies of electric/electronic cars equipment	Voltage	PN-S-76020:1997 p. 3.3.2
	Voltage drop	PN-S-76020:1997 p. 3.3.3
	Resistance to high voltage	PN-S-76020:1997 p. 3.3.4
	Resistance to short-circuit	PN-S-76020:1997 p .3.3.5
	Resistance to change in the polarity of the power source	PN-S-76020:1997 p. 3.3.6
	Durability	PN-S-76020:1997 p. 3.3.12
	Insulation resistance	ISO 16750-2:2012 p. 4.12
	Dielectric strength	ISO 16750-2:2012 p. 4.11
	Resistance to dump heat, steady state	PN-EN 60068-2-78:2013-11 PN-S-76020:1997 p. 3.3.9
	Thermal resistance	PN-EN-60068-2-2:2009 PN-EN-60068-2-1:2009
	Resistance to cyclical temperature changes	PN-S-76020:1997 p. 3.3.8
	Vibration resistance	PN-EN-60068-2-6:2008 PN-S-76020:1997 p. 3.3.10
	Dust and water resistance	PN-S-76020:1997 p. 3.3.13 PN-EN-60529:2003 p. 13.4; 14.2.3; 14.2.4 PN-EN 60529:2003/A2:2014-07

Tested object / product	Type of activity/tested characteristics/test methods	Reference documents
Cars switches	Voltage drop	BOSMAL/I-7-67/02
	Insulation resistance
	Dielectric strength
	Durability
	Interchangeability of parts
	Thermal resistance	PN-EN-60068-2-2:2009 PN-EN-60068-2-1:2009
	Resistance to cyclical temperature changes	PN-EN-60068-2-14:2009
	Humidity resistance	PN-EN 60068-2-78:2013-11
	Vibration resistance	PN-EN-60068-2-6:2008
	Dust and water resistance	PN-EN-60529:2003 p. 13.4; 14.2.3; 14.2.4 PN-EN 60529:2003/A2:2014-07
Automobile electronic breakers for direction indicator lamps and emergency lights	Start time	PN-ISO 4082-1999 p.5.5
	Frequency and duty cycle	PN-ISO 4082-1999 p.5.6
	Voltage drop	PN-ISO 4082-1999 p.5.8
	Dielectric strength	PN-ISO 4082-1999 p.5.9
	Resistance to overload	PN-ISO 4082-1999 p.5.11
	Vibration resistance	PN-ISO 4082-1999 p.5.12.2
	Impact resistance	PN-ISO 4082-1999 p.5.13
	Resistance to heat and cold	PN-ISO 4082-1999 p.5.14
	Operation in extreme temperatures	PN-ISO 4082-1999 p.5.15
	Durability	PN-ISO 4082-1999 p.5.16
Wire harnesses/cables of low voltage car installation	Insulation resistance Withstand voltage Voltage drop Resistance to cyclical temperature changes Squeeze test Quality of manufacturing Tightness test (bubble test) Resistance to high temperature Cold flexibility Cold flexibility after accelerated ageing Resistance to static immersion Resistance to rain Insulation shrinkage Cold Impact Active resistance	BOSMAL/I-7-69/03 ISO 6722-1:2011 ISO 6722-1:2011/Cor 1:2012 PN-EN 60068-2-14:2009 IEC 60227-2:1997+A1:2003 p. 2.1
Electrical connectors	Resistance (voltage drop) Water resistance Temperature/humidity cycling Insulation resistance Withstand voltage Connector coding and polarization Current cycles Heat ageing Free fall Dust resistance Rapid change of temperature (thermal shock) Temperature rise	PN-EN ISO 8092-2:2008

Tested object / product	Type of activity/tested characteristics/test methods	Reference documents
Electrical connectors	Crimp resistance (50 x 10^-6W to 1 W)	PN-EN ISO 60512-2-1:2006 PN-EN ISO 60512-2-2:2006 PN-EN 60352-2:2006 PN-EN 60352-2:2006/A1:2013-10
Connectors for electronic equipment	Contact resistance - millivolt level method	PN-EN 60512-2-1:2006
	Contact resistance - test current method	PN-EN 60512-2-2:2006
	Insulation resistance	PN-EN 60512-3-1:2005
	Voltage stress test	PN-EN 60512-4-1:2006
	Voltage proof of pre-insulated crimp barrels	PN-EN 60512-4-3:2006
	Temperature rise	PN-EN 60512-5-1:2006
	Current-carrying capacity tests with current-temperature derating	PN-EN 60512-5-2:2005
	Current loading, cyclic	PN-EN 60512-9-5:2010
	Climatic tests	PN-EN 60512-11-1:2002 PN-IEC 68-2-61:1994 PN-IEC 68-2-61:1994/Ap1:1999
Electrical and electronic equipment installed in L, M, N and O-category vehicles, supplied with 12 V and 24 V DC current	Measurements of emitted disturbances	ISO7637-2:2011 UNECE Regulation No. 10 Series 05 Annex 10
	Resistance to transient conduction along supply lines: impulses 1, 2a, 2b, 3a, 3b, 4, 5a, 5b	ISO 7637-2:2011 ISO 16750-2:2012 UNECE Regulation No. 10 Series 05 Annex 10
Electrical and electronic equipment	Resistance to electrostatic discharges (ESD)	PN-EN 61000-4-2:2011 ISO 10605:2008
Rear-view mirrors for vehicles of categories L, M and N	Coefficient of reflection (total) of mirror surfaces	UNECE Regulation No. 46 Series 04 p.6.1.2.2
Laminated automotive glass for vehicles of categories L, M, N, O and T	Light transmission Optical distortion Secondary-image-separation test	Directive 92/22/EEC Annex II A, as amended, up to Directive 2001/92/EC Annex II B Directive 2009/144/EC Annex III C updated by Directive 2010/62/EU UNECE Regulation No. 43 Series 01 Annex 3, p. 9.1; 9.2; 9.3; 9.4; ISO 3538:1997 p. 5.1; 5.2; 5.3
	Mechanical strength	Directive 92/22/EEC Annex II A, as amended, up to Directive 2001/92/EC Annex II B Directive 2009/144/EC Annex III C updated by Directive 2010/62/EU UNECE Regulation No. 43 Series 01 Annex 3, p. 2.1, 2.2 ISO 3537:2015 p. 6,7
	Resistance to: - high temperature - humidity	Directive 92/22/EEC Annex II A, as amended, up to Directive No. 2001/92/EC Annex II B Directive 2009/144/EC Annex III C updated by Directive 2010/62/EU UNECE Regulation No. 43 Series 01 Annex 3, p. 5; 7

Tested object / product	Type of activity/tested characteristics/test methods	Reference documents
Toughened automotive glass for vehicles of categories L, M, N, O and T	Light transmission Optical distortion Secondary-image-separation test	Directive 92/22/EEC Annex II A,, as amended, up to Directive 2001/92/EC Annex II B Directive 2009/144/EC Annex III C updated by Directive 2010/62/EU UNECE Regulation No. 43 Series 01 Annex 3, p. 9.1; 9.2; 9.3; 9.4 ISO 3538:1997 p. 5.1; 5.2; 5.3
	Mechanical strength	Directive 92/22/EEC Annex II A, as amended, up to Directive 2001/92/EC Annex II B Directive 2009/144/EC Annex III C updated by Directive 2010/62/EU UNECE Regulation No. 43 Series 01 Annex 3, p. 2.1; 2.2; ISO 3537:2015 p. 6; 7
Toughened automotive glass for L, M, N, O and T-category vehicles	Fragmentation	Directive 92/22/EEC Annex II A, as amended up to Directive 2001/92/EC Annex II B Directive 2009/144/EC Annex III C updated by Directive 2010/62/EU UNECE Regulation No. 43 Series 01 Annex 3, p. 1 ISO 3537:2015 p. 9
Heated rear windows (backlights)	Power of heating circuit Circuit continuity Temperature rise Defrosting Heat-shock resistance Durability of heating circuit Abrasion resistance	BOSMAL/I-7-85/02
Advance-warning triangles	Colour Coefficient of luminous intensity Luminance factor	UN ECE Regulation No. 27 Series 04
Retro-reflective devices for L, M, N, O and T-category vehicles	Colour	UNECE Regulation No. 3 Series 02 Directive76/757/EEC Annex VII, as amended up toDirective2006/96/EC Annex II
	Coefficient of luminous intensity	UNECE Regulation No. 3 Series 02 Directive 76/757/EEC Annex VII, as amended up toDirective2006/96/EC Annex II
Vertical traffic signs	Colour	WT-ITS/19/94-PLE ed. 6 (04.06.2004) p. 5.6.4 PN- EN 12899-1:2010 p. 4.1.1.3
Vertical traffic signs	Coefficient of luminous intensity	WT-ITS/19/94-PLE ed. 6 (04.06.2004) p. 5.6.5 PN-EN 12899-1:2010 p. 4.1.1.4
Marking plates for slow-moving M, N, O and T-category vehicles and mobile machinery	Colour	PN-S-73102:1994 p. 4.6.3 UNECE Regulation No. 69 Series 01 Annex 6
	Coefficient of luminous intensity	PN-S-73102:1994 p. 4.6.4 Regulation No. 69 UNECE Series 01 Annex 7
Marking plates for heavy and long vehicles	Colour	UNECE Regulation No. 70 Series 01
Marking plates for heavy and long vehicles	Coefficient of luminous intensity	UNECE Regulation No. 70 Series 01

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Direction indicators lights for vehicles of categories L, M, N, O and T

Colour of light

Luminous intensity

UN ECE Regulation No. 6 Series 01 p. 6; 8

Directive76/759/EEC Annex 0 p. 6; 8, as amended up to Directive2006/96/EC Annex II

Front and rear position (side) lights for vehicles of categories L, M, N, O and T

Colour of light

Luminous intensity

UN ECE Regulation No. 7 Series 02 p. 6; 8

Directive76/758/EEC Annex 0 p. 6; as amended, up to Directive 2006/96/EC Annex II

Stop lights for vehicles of categories L, M, N, O and T

Colour of light

Luminous intensity

UN ECE Regulation No. 7 Series 02 p. 6; 8

Directive76/758/EEC Annex 0 p. 6; 8, as amended, up to Directive 2006/96/EC
Annex II

Rear fog lights for vehicles of categories L3, L4, L5, L7, M, N, O and T

Colour of light

Luminous intensity

UN ECE Regulation No. 38 Series 00 Directive77/538/EEC Annex 0 p. 3; 6, as amended, up to Directive 2006/96/EC Annex II

Reversing lamps for vehicles of categories M, N, O and T

Colour of light

Luminous intensity

UN ECE Regulation No. 23 Series 00 p. 6; 8

Directive 77/539/EEC Annex 0 p. 6; 8, as amended, up to Directive2006/96/EC Annex II

Light-signalling devices for vehicles of category L

Colour of light

Luminous intensity

Luminance

UN ECE Regulation No. 50 Series 00

BOSMAL/I-7-84/02

CIE 15:2004

CIE 15:2018

Headlamps for vehicles of categories L, M, N and T

Colour of light

Luminous intensity

Illuminance

UN ECE Regulation No. 1 Series 02

UN ECE Regulation No. 5 Series 03

UN ECE Regulation No. 8 Series 05

UN ECE Regulation No. 19 Series 04

UN ECE Regulation No. 20 Series 03

UN ECE Regulation No. 31 Series 03

UN ECE Regulation No. 56 Series 01

UN ECE Regulation No. 57 Series 02

UN ECE Regulation No. 72 Series 01

UN ECE Regulation No. 82 Series 01

UN ECE Regulation No. 98 Series 01

UN ECE Regulation No. 112 Series 01

UN ECE Regulation No. 113 Series 02

UN ECE Regulation No. 123 Series 01

BOSMAL/I-7-84/02

CIE 15:2004

CIE 15:2018

Special warning lamps

Warning and safety light devices

Obstruction lights

Luminous intensity/ Effective luminous intensity

Frequency of pulse

Colour of light

UN ECE Regulation No. 65 Series 00

PN-EN 12352:2010

ICAO 9157 PART 4 “Aerodrome Design Manual” ed. 4 – 2004

BOSMAL/I-7-84/02

CIE 15:2004

CIE 15:2018

Tested object / product	Type of activity/tested characteristics/test methods	Reference documents
Solid electrical insulating materials	Surface resistance Volume resistance Resistance to the grounding element Resistance between points (range up to 100 TΩ) Dielectric strength (voltage up to 35 kV, current up to 1 A)	BOSMAL/I-7-65/02 PN-EN 61340-2-3:2002 PN-EN 62631-1:2011 PN-EN 62631-3-1:2016-10 PN-EN 62631-3-2:2016-04 PN-EN 62631-3-3:2016-08 PN-EN 60243-1:2013-12
Safety glazing materials (glass, transparent polymers)for vehicles of categories L, M, N, O and T	Haze by spectrophotometric method	ISO 3537:2015 ASTM D1003:2013 BOSMAL/I-7-72/02 UN ECE Regulation No. 43 Series 01 Annex 3 p. 4 ANSI/SAE Z-26.1:1996
Products from plastic, glass, textiles, nonwovens, foams, rubber, coatings (including painting ones)	Colour of materials reflecting and transmitting light	BOSMAL/I-7-66/02 PN-EN ISO 105-A05:2000 PN-EN ISO 105-J01:2002 PN-EN ISO 105-J03:2009 PN-ISO 7724-1:2003 PN-ISO 7724-2:2003 PN-ISO 7724-3:2003 CIE 15:2004 CIE 15:2018 DIN 53236:2018-02 SAE J1545:2014-10 PN-EN ISO 11664-1:2011 PN-EN ISO 11664-2:2011 PN-EN ISO 11664-3:2013-08 PN-EN ISO 11664-4:2011 PN-EN ISO 11664-5:2016-10 PN-EN ISO 11664-6:2016-09
Delineator posts and retroreflectors	Colour Luminance factor Coefficient of luminous intensity	PN-EN 12899-3:2010
High-visibility warning clothes and accessories	Colour Coefficient of retroreflection	PN-EN ISO 20471:2013-07 PN-EN 1150:2001 PN-EN 13356:2004
Reflective materials and devices	Coefficient of luminous intensity Coefficient of retroreflection	CIE 54.2:2001
Devices for illuminating rear registration plates of category M, N, O ,T vehicles	Luminance Angle of incindence of light Colour	UN ECE Regulation No. 4 Series 00
Category M, N, T vehicle parking lights	Luminous intensity Colour	UN ECE Regulation No. 77 Series 00
Category L, M, N, T vehicle daytime running lights	Luminous intensity Colour	UN ECE Regulation No. 87 Series 00
Category L, M, N, O, T vehicle side-marker lights	Luminous intensity Colour	UN ECE Regulation No. 91 Series 00
Category M, N, O vehicle retro-reflective marking	Coefficient of luminous intensity Colour	UN ECE Regulation No. 104 Series 00
Category M, N, T vehicle cornering lights	Luminous intensity Colour	UN ECE Regulation No. 119 Series 01

Road Testing Department (BD) Sarni Stok 93, 43-300 Bielsko-Biała
Tested object / product	Type of activity/tested characteristics/test methods	Reference documents
Vehicles of category M1	Useful trunk capacity by use the measuring cuboids method	ISO 3832:2002
	Wind screen defrosting and demisting	Regulation (EU) No. 672/2010 Annex II p. 2
	Weight and its distribution on each axle, sides and wheels by use portable weighing platforms Range: 150 to 6000kg on single wheel	PN-ISO 2416:1997 Directive95/48/EC App. to Annex II
	Interior heating effectiveness by measuring temperatures at certain locations of the car while driving	BOSMAL/I-7-62/03
Vehicles of categories M1 and N1	Wheel setting geometry: Range of measurement: - wheel convergence: ± 3° - wheel's angle of heel: ± 5° - stub-axle's angle of heel: ± 18° - stub-axle's castor angle: ±18° - wheel's steering angle: ± 20° - front wheels' displacement: ± 2°	BOSMAL/I-7-11/04
	Centre of gravity situation by car’s weight method horizontally and with one axle upraised	ISO 10392:2011 w/o p.7
	Maximum speed by non-contact method on a straight track or oval ring Range: up to 190 km/h	BOSMAL/I-7-83/02 UN ECERegulation No. 68 Series 00 p. 5.5.1; 5.5.3; 5.5.4
	Acceleration intensity by non-contact method on a straight track Range: up to 190 km/h	BOSMAL/I-7-83/02
	Incorrectness of odometer's readings by comparison with values measured by non-contact method	BOSMAL/I-7-59/03
	Incorrectness of speedometer's readings by comparison with values measured by non-contact method	UN ECE Regulation No. 39 Series 01 p. 5.3
	Fuel consumption characteristics by volumetric method in the road test Range: 60 l/h	BOSMAL/I-7-58/02
	Fuel consumption at constant speed by volumetric method in the road test Range: 60 l/h	UN ECE Regulation No. 84 Series 00 Annex 4, p.3.3.1
	Oil consumption under on-road conditions by gravimetric method	BOSMAL/I-7-13/07

Tested object / product	Type of activity/tested characteristics/test methods	Reference documents
Vehicles of categories M1 and N1	Tire tread abrasibility under on-road conditions by supervised exploitation method	BOSMAL/I-7-92/02
	U-turn diameter by marking drive track with liquid under the moving vehicle	BOSMAL/I-7-60/02
	Durability, reliability and functionality during mileage accumulation over various routes	BOSMAL/I-7-61/03
Vehicles of categories M1 and N1with hydraulic brakes	Braking systems efficiency by road and speed measured by non-contact method	UN ECE Regulation No. 13 Series 11 Annex No. 4 (w/o Annex No. 13) UN ECE Regulation No. 13H Series 01 Annex No. 3 (w/o Annex No. 6) UN ECE Regulation No. 90 Series 02 Annex No. 3 (w/o p. 2.2) and Annex No. 11 (w/o p. 3 and 4) Directive 98/12/EC Annex II
Vehicles of categories M1, N1 and N2	In-use fuel consumption by volumetric method in the road test Range: 60 l/h	BOSMAL/I-7-12/04
Car parts, sub-assemblies and sets	Assemblability in workshop conditions	BOSMAL/I-7-14/03
Vehicles of categories M2 and M3	Fuel consumption in SORT road cycle Volumetric method in the road test Range: 60 l/h	UITP Project SORT Standardized On-Road Test Cycles New Edition UITP 2014 D/2014/0105/1
Vehicles of categories M1, N1 and T	Engine starting efficiency under different temperature conditions Range of temperature: (-40 to +50) ^oC	BOSMAL/I-7-73/01
Vehicles of category T	Maximum design speed	Directive2009/60/EC corrected by Directive2010/62/EC
	Checking the speed regulator regarding the maximum design speed	Directive2009/144/EC corrected by Directive2010/52/EC and by Directive 2010/62/EC
	Effectiveness of the braking systemsby measuring the braking distance and delay as well as speed by non-contact method	Directive76/432/EEC App. II as amended, up to Directive97/54/EC
Mechanical coupling components of combinations of vehicles	The installation and the position on the vehicle	UN ECE Regulation No. 55 Series 01, Annex No. 7
Vehicles of category N	Dimensions of vehicle external projections by use of models and special equipment	UNECE Regulation No. 61 Series 00
Vehicles of categories M, N and O	Installation of tyres	Commission Regulation (EU) 458/2011

Gauge and Standards Room - Metrology (BP) Sarni Stok 93, 43-300 Bielsko-Biała
Tested object / product	Type of activity/tested characteristics/test methods	Reference documents
Metal, plastic (stiff) and glass products	External, internal, mixed and indirect dimensions: - up to 5000 mm on the surface by direct, comparison method (with accuracy up to 1 mm), - up to 3000 mm by direct, coordinate, contact method (with accuracy up to 0.005 mm), - up to 300 mm by direct, contact-free method (with accuracy up to 0.001 mm) - up to 200 mm by direct, differential method (with accuracy up to 0.001 mm)	BOSMAL/I-7-32/05 BOSMAL/I-7-78/01 BOSMAL/I-7-79/01 BOSMAL/I-7-80/02 BOSMAL/I-7-81/02 BOSMAL/I-7-82/01
	Angular dimensions: - arm of an angle up to 3000 mm by direct, contact method (with accuracy up to 1') - arm of an angle up to 300 mm by direct, contact-free method (with accuracy up to 10')	BOSMAL/I-7-32/05 BOSMAL/I-7-79/01 BOSMAL/I-7-80/02 BOSMAL/I-7-81/02 BOSMAL/I-7-82/01
	Surface roughness: - parameters defined in the norm PN-ENISO 4287:1999 by direct, contact method with accuracy up to 0.02 µm - flat surfaces, - cylindrical surfaces along axis of symmetry	PN-EN ISO 4288:2011
	Shape deviations: a) straightness by direct, contact method - up to 3000 mm (with accuracy up to 0.005 mm), b) flatness - max. surface 3000x1200 mm by direct, contact method c) circularity by direct, contact method - up to Ø 1200 mm (with accuracy up to 0.005 mm), d) cylindricity by direct, contact method - up to Ø 1200 mm and L <3000 mm (with accuracy up to 0.005 mm).	BOSMAL/I-7-32/05 BOSMAL/I-7-78/01 BOSMAL/I-7-79/01 BOSMAL/I-7-80/02 BOSMAL/I-7-81/02 BOSMAL/I-7-82/01

Tested object / product	Type of activity/tested characteristics/test methods	Reference documents
Metal, plastic (stiff) and glass products	Position deviations: a) parallelism - up to 3000 mm by direct, contact method (with accuracy up to 0.005 mm), - up to 300 mm by direct, contact-free method (with accuracy up to 0.002 mm) b) perpendicularity - up to 3000 mm by direct, contact method (with accuracy up to 0.005 mm) - up to 300 mm by direct, contact-free method (with accuracy up to 0.002 mm) c) position - up to 3000 mm by direct, contact method (with accuracy up to 0.005 mm) - up to 300 mm by direct, contact-free method (with accuracy up to 0.002 mm) d) concentricity - up to 1200 mm by direct, contact method(with accuracy up to 0.005 mm) - up to 300 mm by direct, contact-free method (with accuracy up to 0.002 mm) e) coaxiality - up to 1200 mm by direct, contact method(with accuracy up to0.005 mm) - up to 300 mm by direct, contact-free method (with accuracy up to 0.002 mm) f) symmetry - up to 3000 mm by direct, contact method (with accuracy up to 0.005 mm) - up to 300 mm direct, contact-free method (with accuracy up to 0.002 mm) Complexity deviation - radial and axis run-out	BOSMAL/I-7-32/05 BOSMAL/I-7-78/01 BOSMAL/I-7-79/01 BOSMAL/I-7-80/02 BOSMAL/I-7-81/02 BOSMAL/I-7-82/01
	Pitch diameter of external, metric thread M4 to M32 three measuring wires method (with accuracy up to 0.002 mm)	BOSMAL/I-7-36/03
	Internal, metric thread dimensions M4 to M32 - by plug gauge	PN-ISO 1502:1998

Tested object / product

Type of activity/tested

characteristics/test methods

Reference documents

Rubber and plastic products (flexible)

with limitations as a result of flexibility of the objects

External, internal, mixed, indirect dimensions:

- up to 5000 mm on the surface
by direct, comparison method
(with accuracy up to 1 mm),

- up to 3000 mm
by direct, contact method
(with accuracy up to 0.2 mm),

- up to 300 mm
by direct, contact-free method
(with accuracy up to 0.1 mm)

BOSMAL/I-7-32/05
BOSMAL/I-7-79/01
BOSMAL/I-7-81/02
BOSMAL/I-7-82/01

Angular dimensions:

- arm of an angle up to 3000 mm
by indirect, contact method
(with accuracy up to 20'),

- arm of an angle up to 300 mm
by direct, contact-free method
(with accuracy up to 10')

BOSMAL/I-7-32/05
BOSMAL/I-7-79/01
BOSMAL/I-7-81/02
BOSMAL/I-7-82/01

Type of operation: Performance of vehicle EC type or vehicle type approval tests
Vehicle category	Legal basis
M, N, O	Directive 2007/46/EC of the European Parliament and of the Council of 5 September 2007
	ACT of 20 June 1997 - Road Traffic Law
	Regulation of the Minister of Transport, Construction and Maritime Economy of 25 March 2013 on the type approval of automobile vehicles, trailers, components of their equipment and parts
	Procedure BOSMAL/P-1-20/06
T, R, C	Regulation (EU) 167/2013 from 05.02.2013.
	ACT of 20 June 1997 - Road Traffic Law
	Regulation of the Minister of Transport, Construction and Maritime Economy of 18 June 2013
	Procedure BOSMAL/P-1-20/06
L	Regulation (EU) 168/2013 from 15.01.2013
	ACT of 20 June 1997 - Road Traffic Law
	Regulation of the Minister of Transport, Construction and Maritime Economy of 17 June 2013
	Procedure BOSMAL/P-1-20/06
S	Regulation (EU) 167/2013 from 05.02.2013
S	Procedure BOSMAL/P-1-20/06

Type of operation:		Legal basis:
Equipment component or part approval tests		Act of 20 June 1997 - Road Traffic Law
		Procedure BOSMAL/P-1-20/06
M1, M2, N1, N2	Emissions (Euro 5 and 6) from light vehicles /access to information		Regulation (EC) 715/2007 Regulation (EC) 692/2008
M, N	Emissions (Euro VI) from heavy vehicles / access to information		Regulation (EC) 595/2009 Regulation (EU) 582/2011
M1	Windscreen defrosting and demisting systems		Regulation (EU) 672/2010
Pojazdy kat. M, N, O	Space for mounting and fixing of rear registration plates		Regulation (EU) 1003/2010
M, N	Towing devices		Regulation (EU) 1005/2010
Pojazdy kat. M, N, O	Manufacturer’s statutory plate and vehicle identification number		Regulation (EU) 19/2011
N, O	Wheel spray suppression system		Regulation (EU) 109/2011
M, N, O	Installation of tyres		Regulation (EU) 458/2011
M, N	Vehicle access and manoeuvrability		Regulation (EU) 130/2012
M, N, O	Masses and dimensions of motor vehicles		Regulation (EU) 1230/2012
L	Environmental and propulsion unit performance requirements		Regulation (EU) 134/2014
-	Engines for non-road mobile machinery Requirements relating to limits of gaseous and particulate pollutant emissions from these engines		Regulation (EU) 2016/1628
N2, N3	CO2 emissions and fuel consumption of heavy-duty vehicles		Regulation (EU) 2017/2400
T, C	Environmental and propulsion unit performance requirements for agricultural and forestry vehicles and their engines		Regulation (EU) 2018/985
-	Automobile headlamps with asymmetric dipped lights or high beam lights and category R2 or HS1 bulbs		UN ECE Regulation No. 1
L, M, N, O, T	Retro-reflecting devices of motor vehicles and their trailers		UN ECE Regulation No. 3
M, N, O, T	Devices for illuminating rear registration plates of motor vehicles and their trailers		UN ECE Regulation No. 4
T	”Sealed beam” (SB) type headlamps with European asymmetric dipped lights or high beam lights		UN ECE Regulation No. 5
L, M, N, O, T	Direction indicators of motor vehicles and their trailers		UN ECE Regulation No. 6
L, M, N, O, T	Front and rear position lamps, stop lamps and end-outline marker lamps of motor vehicles and their trailers		UN ECE Regulation No. 7
-	Headlamps of automobile vehicles with asymmetric dipped lights or high beam lights and halogen bulbs (H1, H2, H3, HB3, HB4, H7, H8, H9, HIR1, HIR2 or H11)		UN ECE Regulation No. 8

Type of operation:		Legal basis:
Equipment component or part approval tests		Act of 20 June 1997 - Road Traffic Law
		Procedure BOSMAL/P-1-20/06
M, N, O, L	Electromagnetic compatibility		UN ECE Regulation No. 10
M2, M3, N, O	Vehicles and trailers with regard to braking		UN ECE Regulation No. 13
M1, N1	Passenger cars with regard to braking		UN ECE Regulation No. 13H
L3, L4, L5, L7, M, N, T	Front fog lamps of motor vehicles		UN ECE Regulation No. 19
-	Automobile headlamps with asymmetric dipped lights or high beam lights and halogen bulbs (H4 bulbs)		UN ECE Regulation No. 20
M, N, O, T	Reversing lamps of motor vehicles and their trailers		UN ECE Regulation No. 23
-	Approval of compression ignition engines with regard to the emission of visible pollutants Approval of motor vehicles with regard to the installation of compression ignition engines of an approved type Approval of motor vehicles equipped with compression ignition engines with regard to the emission of visible pollutants by the engine Measurement of power of compression ignition engines		UN ECE Regulation No. 24
-	Warning triangles		UN ECE Regulation No. 27
M, N, T	Automobile „sealed beam” type halogen headlamps with European asymmetrical dipped lights or high beam lights or both		UN ECE Regulation No. 31
L3, L4, L5, L7, M, N, O, T	Rear fog lamps for power-driven vehicles and their trailers		UN ECE Regulation No. 38
M, N, L	Speedometer unit and its installation		UN ECE Regulation No. 39
M, N, O, L, T	Safety glazing materials and their installation on vehicles		UN ECE Regulation No. 43
M, N, L	Devices for indirect vision and their installation		UN ECE Regulation No. 46
M, N, O	Installation of lighting and light-signalling devices in vehicles		UN ECE Regulation No. 48
M, N	Emission of gaseous and particulate pollutants from compression-ignition engines and from positive-ignition engines used in vehicles		UN ECE Regulation No. 49
L	Front and rear position lamps, stop lamps, direction indicators and rear registration-plate illumination for vehicles of category L		UN ECE Regulation No. 50
M, N	External noise level while driving and parking		UN ECE Regulation No. 51
M, N, O	Mechanical coupling parts of vehicle units		UN ECE Regulation No. 55

Type of operation:		Legal basis:
Equipment component or part approval tests		Act of 20 June 1997 - Law on Road Traffic
		Procedure BOSMAL/P-1-20/06
L1, L2	Headlamps for mopeds and vehicles treated as such		UN ECE Regulation No. 56
L3, L4, L5	Headlamps for motor cycles		UN ECE Regulation No. 57
M, N, O	Rear underrun protection devices (RUPD) and their installation		UN ECE Regulation No. 58
M1, N1	Replacement silencing systems		UN ECE Regulation No. 59
N	Commercial vehicles with regard to their external projections forward of the cab’s rear panel		UN ECE Regulation No. 61
-	Warning lamps of motor vehicles and their trailers		UN ECE Regulation No. 65
M1, N1	Measurement of the maximum speed		UN ECE Regulation No. 68
M, N, O, T	Rear marking plates for slow-moving vehicles (by design) and their trailers		UN ECE Regulation No. 69
M, N3, O	Rear marking plates for heavy and long vehicles		UN ECE Regulation No. 70
L, M, N, T	Motorcycle headlamps with asymmetric dipped lights or high beam lights equipped with halogen bulbs (HS1)		UN ECE Regulation No. 72
N2, N3, O3, O4	Lateral protection device (LPD) and its installation		UN ECE Regulation No. 73
M, N, T	Parking lamps of motor vehicles		UN ECE Regulation No. 77
L1, L2, L3, L4, L5	Approval of parking lamps for category L1, L2, L3, L4 and L5 vehicles		UN ECE Regulation No. 78
L, M, N, T	Moped headlamps equipped with halogen bulbs (HS2)		UN ECE Regulation No. 82
M1, M2, N1, N2	Approval of vehicles with regard to the emission of pollutants according to engine fuel requirements		UN ECE Regulation No. 83
M1, N1	Measurement of fuel consumption		UN ECE Regulation No. 84
M, N	Approval of internal combustion engines or electric drive trains intended for the propulsion of motor vehicles of categories M and N with regard to the measurement of net power and the maximum 30-minute power of electric drive trains		UN ECE Regulation No. 85
M, N	Daytime running lamps for motor vehicles		UN ECE Regulation No. 87
M, N, O, L	Replacement brake lining assemblies and drum brake linings for motor vehicles and their trailers		UN ECE Regulation No. 90

Type of operation:		Legal basis:
Equipment component or part approval tests